On 7/28/20 4:18 AM, Grzegorz Jaszczyk wrote:
From: Suman Anna <s-a...@ti.com>
The PRUSS INTC has a fixed number of output interrupt lines that are
connected to a number of processors or other PRUSS instances or other
devices (like DMA) on the SoC. The output interrupt lines 2 through 9
are usually connected to the main Arm host processor and are referred
to as host interrupts 0 through 7 from ARM/MPU perspective.
All of these 8 host interrupts are not always exclusively connected
to the Arm interrupt controller. Some SoCs have some interrupt lines
not connected to the Arm interrupt controller at all, while a few others
have the interrupt lines connected to multiple processors in which they
need to be partitioned as per SoC integration needs. For example, AM437x
and 66AK2G SoCs have 2 PRUSS instances each and have the host interrupt 5
connected to the other PRUSS, while AM335x has host interrupt 0 shared
between MPU and TSC_ADC and host interrupts 6 & 7 shared between MPU and
a DMA controller.
Add logic to the PRUSS INTC driver to ignore both these shared and
invalid interrupts.
If a person wanted to use DMA with a PRU what will handle the mapping
of a PRU event to host interrupt 6 or 7 if they are being ignored here?
Signed-off-by: Suman Anna <s-a...@ti.com>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszc...@linaro.org>
---
v3->v4:
- Due to changes in DT bindings which converts irqs-reserved
property from uint8-array to bitmask requested by Rob introduce
relevant changes in the driver.
- Merge the irqs-reserved and irqs-shared to one property since they
can be handled by one logic (relevant change was introduced to DT
binding).
- Update commit message.
v2->v3:
- Extra checks for (intc->irqs[i]) in error/remove path was moved from
"irqchip/irq-pruss-intc: Add a PRUSS irqchip driver for PRUSS
interrupts" to this patch
v1->v2:
- https://patchwork.kernel.org/patch/11069757/
---
drivers/irqchip/irq-pruss-intc.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-pruss-intc.c b/drivers/irqchip/irq-pruss-intc.c
index 45b966a..cf9a59b 100644
--- a/drivers/irqchip/irq-pruss-intc.c
+++ b/drivers/irqchip/irq-pruss-intc.c
@@ -474,7 +474,7 @@ static int pruss_intc_probe(struct platform_device *pdev)
struct pruss_intc *intc;
struct pruss_host_irq_data *host_data[MAX_NUM_HOST_IRQS] = { NULL };
int i, irq, ret;
- u8 max_system_events;
+ u8 max_system_events, invalid_intr = 0;
data = of_device_get_match_data(dev);
if (!data)
@@ -496,6 +496,16 @@ static int pruss_intc_probe(struct platform_device *pdev)
return PTR_ERR(intc->base);
}
+ ret = of_property_read_u8(dev->of_node, "ti,irqs-reserved",
+ &invalid_intr);
Why not make the variable name match the property name?
+
+ /*
+ * The irqs-reserved is used only for some SoC's therefore not having
+ * this property is still valid
+ */
+ if (ret < 0 && ret != -EINVAL)
+ return ret;
+
pruss_intc_init(intc);
mutex_init(&intc->lock);
@@ -506,6 +516,9 @@ static int pruss_intc_probe(struct platform_device *pdev)
return -ENOMEM;
for (i = 0; i < MAX_NUM_HOST_IRQS; i++) {
+ if (invalid_intr & BIT(i))
+ continue;
+
irq = platform_get_irq_byname(pdev, irq_names[i]);
if (irq <= 0) {
dev_err(dev, "platform_get_irq_byname failed for %s :
%d\n",
@@ -533,8 +546,11 @@ static int pruss_intc_probe(struct platform_device *pdev)
return 0;
fail_irq:
- while (--i >= 0)
- irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL);
+ while (--i >= 0) {
+ if (intc->irqs[i])
+ irq_set_chained_handler_and_data(intc->irqs[i], NULL,
+ NULL);
+ }
irq_domain_remove(intc->domain);
@@ -548,8 +564,11 @@ static int pruss_intc_remove(struct platform_device *pdev)
unsigned int hwirq;
int i;
- for (i = 0; i < MAX_NUM_HOST_IRQS; i++)
- irq_set_chained_handler_and_data(intc->irqs[i], NULL, NULL);
+ for (i = 0; i < MAX_NUM_HOST_IRQS; i++) {
+ if (intc->irqs[i])
+ irq_set_chained_handler_and_data(intc->irqs[i], NULL,
+ NULL);
+ }
for (hwirq = 0; hwirq < max_system_events; hwirq++)
irq_dispose_mapping(irq_find_mapping(intc->domain, hwirq));