On Wed 29 Jul 05:34 PDT 2020, Georgi Djakov wrote: > There are drivers which just need to get multiple interconnect paths, > request some predefined amounts of bandwidth and then just toggle the > paths between enabled/disabled state. > > The aim of this patch is simplify the above and to allow drivers to put > all the path names and bandwidth data into a single static icc_bulk_data > table and call the icc_bulk_* functions on that table in order to scale > all the interconnect paths in parallel. > > Suggested-by: Evan Green <evgr...@chromium.org> > Suggested-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.anders...@linaro.org> Regards, Bjorn > Signed-off-by: Georgi Djakov <georgi.dja...@linaro.org> > --- > > v2: > * Fix kernel-doc. (Bjorn) > * Do not print EPROBE_DEFER errors. (Bjorn) > > v1: https://lore.kernel.org/r/20200528162542.30158-1-georgi.dja...@linaro.org/ > > drivers/interconnect/Makefile | 2 +- > drivers/interconnect/bulk.c | 117 ++++++++++++++++++++++++++++++++++ > include/linux/interconnect.h | 22 +++++++ > 3 files changed, 140 insertions(+), 1 deletion(-) > create mode 100644 drivers/interconnect/bulk.c > > diff --git a/drivers/interconnect/Makefile b/drivers/interconnect/Makefile > index 4825c287ca13..d203520b0a56 100644 > --- a/drivers/interconnect/Makefile > +++ b/drivers/interconnect/Makefile > @@ -1,7 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > > CFLAGS_core.o := -I$(src) > -icc-core-objs := core.o > +icc-core-objs := core.o bulk.o > > obj-$(CONFIG_INTERCONNECT) += icc-core.o > obj-$(CONFIG_INTERCONNECT_IMX) += imx/ > diff --git a/drivers/interconnect/bulk.c b/drivers/interconnect/bulk.c > new file mode 100644 > index 000000000000..73e2c8d0a412 > --- /dev/null > +++ b/drivers/interconnect/bulk.c > @@ -0,0 +1,117 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +#include <linux/interconnect-provider.h> > +#include <linux/device.h> > +#include <linux/export.h> > + > +/** > + * of_icc_bulk_get() - get interconnect paths > + * @dev: the device requesting the path > + * @num_paths: the number of icc_bulk_data > + * @paths: the table with the paths we want to get > + * > + * Returns 0 on success or negative errno otherwise. > + */ > +int __must_check of_icc_bulk_get(struct device *dev, int num_paths, > + struct icc_bulk_data *paths) > +{ > + int ret, i; > + > + for (i = 0; i < num_paths; i++) { > + paths[i].path = of_icc_get(dev, paths[i].name); > + if (IS_ERR(paths[i].path)) { > + ret = PTR_ERR(paths[i].path); > + if (ret != -EPROBE_DEFER) > + dev_err(dev, "of_icc_get() failed on path %s > (%d)\n", > + paths[i].name, ret); > + paths[i].path = NULL; > + goto err; > + } > + } > + > + return 0; > + > +err: > + icc_bulk_put(i, paths); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(of_icc_bulk_get); > + > +/** > + * icc_bulk_put() - put a list of interconnect paths > + * @num_paths: the number of icc_bulk_data > + * @paths: the icc_bulk_data table with the paths being put > + */ > +void icc_bulk_put(int num_paths, struct icc_bulk_data *paths) > +{ > + while (--num_paths >= 0) { > + icc_put(paths[num_paths].path); > + paths[num_paths].path = NULL; > + } > +} > +EXPORT_SYMBOL_GPL(icc_bulk_put); > + > +/** > + * icc_bulk_set() - set bandwidth to a set of paths > + * @num_paths: the number of icc_bulk_data > + * @paths: the icc_bulk_data table containing the paths and bandwidth > + * > + * Returns 0 on success or negative errno otherwise. > + */ > +int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths) > +{ > + int ret = 0; > + int i; > + > + for (i = 0; i < num_paths; i++) { > + ret = icc_set_bw(paths[i].path, paths[i].avg_bw, > paths[i].peak_bw); > + if (ret) { > + pr_err("icc_set_bw() failed on path %s (%d)\n", > paths[i].name, ret); > + return ret; > + } > + } > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(icc_bulk_set_bw); > + > +/** > + * icc_bulk_enable() - enable a previously disabled set of paths > + * @num_paths: the number of icc_bulk_data > + * @paths: the icc_bulk_data table containing the paths and bandwidth > + * > + * Returns 0 on success or negative errno otherwise. > + */ > +int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths) > +{ > + int ret, i; > + > + for (i = 0; i < num_paths; i++) { > + ret = icc_enable(paths[i].path); > + if (ret) { > + pr_err("icc_enable() failed on path %s (%d)\n", > paths[i].name, ret); > + goto err; > + } > + } > + > + return 0; > + > +err: > + icc_bulk_disable(i, paths); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(icc_bulk_enable); > + > +/** > + * icc_bulk_disable() - disable a set of interconnect paths > + * @num_paths: the number of icc_bulk_data > + * @paths: the icc_bulk_data table containing the paths and bandwidth > + */ > +void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths) > +{ > + while (--num_paths >= 0) > + icc_disable(paths[num_paths].path); > +} > +EXPORT_SYMBOL_GPL(icc_bulk_disable); > diff --git a/include/linux/interconnect.h b/include/linux/interconnect.h > index 3a63d98613fc..f2dd2fc8d3cd 100644 > --- a/include/linux/interconnect.h > +++ b/include/linux/interconnect.h > @@ -23,6 +23,28 @@ > struct icc_path; > struct device; > > +/** > + * struct icc_bulk_data - Data used for bulk icc operations. > + * > + * @path: reference to the interconnect path (internal use) > + * @name: the name from the "interconnect-names" DT property > + * @avg_bw: average bandwidth in icc units > + * @peak_bw: peak bandwidth in icc units > + */ > +struct icc_bulk_data { > + struct icc_path *path; > + const char *name; > + u32 avg_bw; > + u32 peak_bw; > +}; > + > +int __must_check of_icc_bulk_get(struct device *dev, int num_paths, > + struct icc_bulk_data *paths); > +void icc_bulk_put(int num_paths, struct icc_bulk_data *paths); > +int icc_bulk_set_bw(int num_paths, const struct icc_bulk_data *paths); > +int icc_bulk_enable(int num_paths, const struct icc_bulk_data *paths); > +void icc_bulk_disable(int num_paths, const struct icc_bulk_data *paths); > + > #if IS_ENABLED(CONFIG_INTERCONNECT) > > struct icc_path *icc_get(struct device *dev, const int src_id,