Hi, I am trying to add ISA-PNP support to the ENSONIQ SoundScape driver, but am suffering from a lack of examples: the only one I have is my own. Can anyone who is using the sscape.o driver to control their soundcard please email me with their working module parameters, plus the output from either pnpdump or /proc/isapnp? And if you have a SoundScape which doesn't have any pnpdump or /proc/isapnp output, then can you tell me about your card too? For example, my Soundscape has this ISA-PNP output: # more /proc/isapnp Card 1 'ENS3081:ENSONIQ Soundscape' PnP version 1.0 Logical device 0 'ENS0000:Unknown' Device is active Active port 0x330,0x300 Active IRQ 5 [0x2],9 [0x2] Active DMA 1,3 Resources 0 Priority preferred Port 0x330-0x330, align 0xf, size 0x10, 16-bit address decoding IRQ 5,7 High-Edge IRQ 2/9 High-Edge DMA 1 8-bit byte-count compatible DMA 0,3 8-bit byte-count compatible ... And uses these module options: options sscape irq=5 dma=1 io=0x338 mpu_io=0x330 mpu_irq=9 Cheers, Chris - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] Please read the FAQ at http://www.tux.org/lkml/