On 10/30/07, Bryan Wu <[EMAIL PROTECTED]> wrote: > --- a/drivers/i2c/busses/i2c-bfin-twi.c > +++ b/drivers/i2c/busses/i2c-bfin-twi.c > +static int setup_pin_mux(int action, struct bfin_twi_iface *iface) > +{ > + > + u16 pin_req[2][3] = { > + {P_TWI0_SCL, P_TWI0_SDA, 0}, > + {P_TWI1_SCL, P_TWI1_SDA, 0}, > + };
might be better to have this in the boards file ... consider the scenario on the BF54x where the user wants to use I2C0 and not I2C1 or vice versa so that they can use the set of pins for something else ... this would prevent such a setup > + if (action) { > + if (peripheral_request_list(pin_req[iface->bus_num], > DRV_NAME)) > + return -EFAULT; > + } else { > + peripheral_free_list(pin_req[iface->bus_num]); > + } > + > + return 0; > +} EFAULT is incorrect i think ... want to pass back the actual value from peripheral_request_list() > --- a/drivers/i2c/busses/i2c-bfin-twi.c > +++ b/drivers/i2c/busses/i2c-bfin-twi.c > +static int setup_pin_mux(int action, struct bfin_twi_iface *iface) > +{ > + > + u16 pin_req[2][3] = { > + {P_TWI0_SCL, P_TWI0_SDA, 0}, > + {P_TWI1_SCL, P_TWI1_SDA, 0}, > + }; might be better to have this in the boards file ... consider the scenario on the BF54x where the user wants to use I2C0 and not I2C1 or vice versa so that they can use the set of pins for something else ... this would prevent such a setup if (action) return peripheral_request_list(pin_req[iface->bus_num], DRV_NAME); else peripheral_free_list(pin_req[iface->bus_num]); return 0; -mike - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/