[PATCH] arm64: dts: meson: vim3: correct led polarity

[Jerome Brunet]

The LEDs on the vim3 are active when the gpio is high, not low.

Fixes: c6d29c66e582 ("arm64: dts: meson-g12b-khadas-vim3: add initial 
device-tree")
Signed-off-by: Jerome Brunet <jbru...@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi 
b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 4510a63b0006..9e2995dc144b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -70,13 +70,13 @@ leds {
 
                led-white {
                        label = "vim3:white:sys";
-                       gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
                        linux,default-trigger = "heartbeat";
                };
 
                led-red {
                        label = "vim3:red";
-                       gpios = <&gpio_expander 5 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio_expander 5 GPIO_ACTIVE_HIGH>;
                };
        };
 
-- 
2.25.4