Am Dienstag, den 04.08.2020, 13:38 +0800 schrieb Anson Huang:
> When devm_clk_get() returns -EPROBE_DEFER, i.MX6 PCI driver should
> NOT print error message, just return -EPROBE_DEFER is enough.
The reasoning behind this change is fine, but I think we should use the
recently merged dev_err_probe() helper to achieve the same goal.
Regards,
Lucas
> Signed-off-by: Anson Huang <anson.hu...@nxp.com>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 30 ++++++++++++++++++++----------
> 1 file changed, 20 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 4e5c379..ee75d35 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1076,20 +1076,26 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> /* Fetch clocks */
> imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
> if (IS_ERR(imx6_pcie->pcie_phy)) {
> - dev_err(dev, "pcie_phy clock source missing or invalid\n");
> - return PTR_ERR(imx6_pcie->pcie_phy);
> + ret = PTR_ERR(imx6_pcie->pcie_phy);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "pcie_phy clock source missing or
> invalid\n");
> + return ret;
> }
>
> imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
> if (IS_ERR(imx6_pcie->pcie_bus)) {
> - dev_err(dev, "pcie_bus clock source missing or invalid\n");
> - return PTR_ERR(imx6_pcie->pcie_bus);
> + ret = PTR_ERR(imx6_pcie->pcie_bus);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "pcie_bus clock source missing or
> invalid\n");
> + return ret;
> }
>
> imx6_pcie->pcie = devm_clk_get(dev, "pcie");
> if (IS_ERR(imx6_pcie->pcie)) {
> - dev_err(dev, "pcie clock source missing or invalid\n");
> - return PTR_ERR(imx6_pcie->pcie);
> + ret = PTR_ERR(imx6_pcie->pcie);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "pcie clock source missing or invalid\n");
> + return ret;
> }
>
> switch (imx6_pcie->drvdata->variant) {
> @@ -1097,15 +1103,19 @@ static int imx6_pcie_probe(struct platform_device
> *pdev)
> imx6_pcie->pcie_inbound_axi = devm_clk_get(dev,
> "pcie_inbound_axi");
> if (IS_ERR(imx6_pcie->pcie_inbound_axi)) {
> - dev_err(dev, "pcie_inbound_axi clock missing or
> invalid\n");
> - return PTR_ERR(imx6_pcie->pcie_inbound_axi);
> + ret = PTR_ERR(imx6_pcie->pcie_inbound_axi);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "pcie_inbound_axi clock missing or
> invalid\n");
> + return ret;
> }
> break;
> case IMX8MQ:
> imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
> if (IS_ERR(imx6_pcie->pcie_aux)) {
> - dev_err(dev, "pcie_aux clock source missing or
> invalid\n");
> - return PTR_ERR(imx6_pcie->pcie_aux);
> + ret = PTR_ERR(imx6_pcie->pcie_aux);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "pcie_aux clock source missing or
> invalid\n");
> + return ret;
> }
> /* fall through */
> case IMX7D:
