Hello!
On 12.08.2020 10:19, Wesley Cheng wrote:
Add the required DTS node for the USB VBUS output regulator, which is
available on PM8150B. This will provide the VBUS source to connected
peripherals.
Signed-off-by: Wesley Cheng <wch...@codeaurora.org>
---
arch/arm64/boot/dts/qcom/pm8150b.dtsi | 6 ++++++
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 4 ++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index 053c659734a7..9e560c1ca30d 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -53,6 +53,12 @@ power-on@800 {
status = "disabled";
};
+ pm8150b_vbus: dcdc@1100 {
s/dcdc/regulator/? What is "dcdc", anyway?
The device nodes must have the generic names, according to the DT spec.
+ compatible = "qcom,pm8150b-vbus-reg";
+ status = "disabled";
+ reg = <0x1100>;
+ };
+
pm8150b_typec: typec@1500 {
compatible = "qcom,pm8150b-usb-typec";
status = "disabled";
[...]
MBR, Sergei
