[PATCH] ARM: dts: meson: move the L2 cache-controller inside the SoC node

[Martin Blumenstingl]

All IO mapped SoC peripherals should be within the "soc" node. Move the
L2 cache-controller there as well since it's the only one not following
this pattern.

Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
 arch/arm/boot/dts/meson.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index eadb0832bcfc..7649dd1e0b9e 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -11,13 +11,6 @@ / {
        #size-cells = <1>;
        interrupt-parent = <&gic>;
 
-       L2: cache-controller@c4200000 {
-               compatible = "arm,pl310-cache";
-               reg = <0xc4200000 0x1000>;
-               cache-unified;
-               cache-level = <2>;
-       };
-
        soc {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -172,6 +165,13 @@ timer_abcde: timer@9940 {
                        };
                };
 
+               L2: cache-controller@c4200000 {
+                       compatible = "arm,pl310-cache";
+                       reg = <0xc4200000 0x1000>;
+                       cache-unified;
+                       cache-level = <2>;
+               };
+
                periph: bus@c4300000 {
                        compatible = "simple-bus";
                        reg = <0xc4300000 0x10000>;
-- 
2.28.0