From: Paul Cercueil <[email protected]>
commit 84e7a946da71f678affacea301f6d5cb4d9784e8 upstream.
The PAT1 register contains information about the IRQ type (edge/level)
for input GPIOs with IRQ enabled, and the direction for non-IRQ GPIOs.
So it makes sense to read it only if the GPIO has no interrupt
configured, otherwise input GPIOs configured for level IRQs are
misdetected as output GPIOs.
Fixes: ebd6651418b6 ("pinctrl: ingenic: Implement .get_direction for GPIO
chips")
Reported-by: João Henrique <[email protected]>
Signed-off-by: Paul Cercueil <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/pinctrl/pinctrl-ingenic.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -1644,7 +1644,8 @@ static int ingenic_gpio_get_direction(st
unsigned int pin = gc->base + offset;
if (jzpc->version >= ID_JZ4760)
- return ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1);
+ return ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_INT) ||
+ ingenic_get_pin_config(jzpc, pin, JZ4760_GPIO_PAT1);
if (ingenic_get_pin_config(jzpc, pin, JZ4740_GPIO_SELECT))
return true;
