From: Brad Bishop <bradl...@fuzziesquirrel.com>

All of the switches in N2_count_control in the counter configuration are
required to make the branch if not equal and increment command work.
Set them when using bneq+.

A side effect of this mode requires a dummy write to TDR when both
transmitting and receiving otherwise the controller won't start shifting
receive data.

It is likely not possible to avoid TDR underrun errors in this mode and
they are harmless, so do not check for them.

Fixes: bbb6b2f9865b ("spi: Add FSI-attached SPI controller driver")
Signed-off-by: Brad Bishop <bradl...@fuzziesquirrel.com>
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
Reviewed-by: Joel Stanley <j...@jms.id.au>
Signed-off-by: Joel Stanley <j...@jms.id.au>
---
 drivers/spi/spi-fsi.c | 28 +++++++++++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 559d0ff981f3..c31a852b6a3e 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -29,6 +29,10 @@
 #define SPI_FSI_ERROR                  0x0
 #define SPI_FSI_COUNTER_CFG            0x1
 #define  SPI_FSI_COUNTER_CFG_LOOPS(x)   (((u64)(x) & 0xffULL) << 32)
+#define  SPI_FSI_COUNTER_CFG_N2_RX      BIT_ULL(8)
+#define  SPI_FSI_COUNTER_CFG_N2_TX      BIT_ULL(9)
+#define  SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
+#define  SPI_FSI_COUNTER_CFG_N2_RELOAD  BIT_ULL(11)
 #define SPI_FSI_CFG1                   0x2
 #define SPI_FSI_CLOCK_CFG              0x3
 #define  SPI_FSI_CLOCK_CFG_MM_ENABLE    BIT_ULL(32)
@@ -61,7 +65,7 @@
 #define  SPI_FSI_STATUS_RDR_OVERRUN     BIT_ULL(62)
 #define  SPI_FSI_STATUS_RDR_FULL        BIT_ULL(63)
 #define  SPI_FSI_STATUS_ANY_ERROR       \
-       (SPI_FSI_STATUS_ERROR | SPI_FSI_STATUS_TDR_UNDERRUN | \
+       (SPI_FSI_STATUS_ERROR | \
         SPI_FSI_STATUS_TDR_OVERRUN | SPI_FSI_STATUS_RDR_UNDERRUN | \
         SPI_FSI_STATUS_RDR_OVERRUN)
 #define SPI_FSI_PORT_CTRL              0x9
@@ -238,6 +242,7 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
        int rc;
        u8 len = min(transfer->len, 8U);
        u8 rem = transfer->len % len;
+       u64 cfg = 0ULL;
 
        loops = transfer->len / len;
 
@@ -258,8 +263,14 @@ static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
        if (loops > 1) {
                fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
 
-               rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG,
-                                      SPI_FSI_COUNTER_CFG_LOOPS(loops - 1));
+               cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
+               if (transfer->rx_buf)
+                       cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
+                               SPI_FSI_COUNTER_CFG_N2_TX |
+                               SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
+                               SPI_FSI_COUNTER_CFG_N2_RELOAD;
+
+               rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
                if (rc)
                        return rc;
        }
@@ -275,6 +286,7 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
 {
        int rc = 0;
        u64 status = 0ULL;
+       u64 cfg = 0ULL;
 
        if (transfer->tx_buf) {
                int nb;
@@ -312,6 +324,16 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
                u64 in = 0ULL;
                u8 *rx = transfer->rx_buf;
 
+               rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
+               if (rc)
+                       return rc;
+
+               if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
+                       rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
+                       if (rc)
+                               return rc;
+               }
+
                while (transfer->len > recv) {
                        do {
                                rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
-- 
2.26.2

Reply via email to