On 2020/08/18 1:48, Rob Herring wrote:
On Fri, Aug 7, 2020 at 4:25 AM Kunihiko Hayashi <hayashi.kunih...@socionext.com> wrote:This gets iATU register area from reg property. In Synopsys DWC version 4.80 or later, since iATU register area is separated from core register area, this area is necessary to get from DT independently. Signed-off-by: Kunihiko Hayashi <hayashi.kunih...@socionext.com> --- drivers/pci/controller/dwc/pcie-uniphier.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c index 55a7166..93ef608 100644 --- a/drivers/pci/controller/dwc/pcie-uniphier.c +++ b/drivers/pci/controller/dwc/pcie-uniphier.c @@ -471,6 +471,11 @@ static int uniphier_pcie_probe(struct platform_device *pdev) if (IS_ERR(priv->pci.dbi_base)) return PTR_ERR(priv->pci.dbi_base); + priv->pci.atu_base = + devm_platform_ioremap_resource_byname(pdev, "atu"); + if (IS_ERR(priv->pci.atu_base)) + priv->pci.atu_base = NULL;Keystone has the same 'atu' resource setup. Please move its code to the DW core and use that.
There are some platforms that pci.atu_base is set by other way. The 'atu' code shouldn't be conflicted with the following existing code. drivers/pci/controller/dwc/pci-keystone.c: atu_base = devm_platform_ioremap_resource_byname(pdev, "atu"); drivers/pci/controller/dwc/pci-keystone.c: pci->atu_base = atu_base; drivers/pci/controller/dwc/pcie-designware.c: pci->atu_base = pci->dbi_base + DEFAULT_DBI_ATU_OFFSET; drivers/pci/controller/dwc/pcie-intel-gw.c: pci->atu_base = pci->dbi_base + data->pcie_atu_offset; drivers/pci/controller/dwc/pcie-tegra194.c: pci->atu_base = devm_ioremap_resource(dev, atu_dma_res); So I'm not sure where to move the code in the DW core. Is there any idea? Thank you, --- Best Regards Kunihiko Hayashi
