Motherboard is ASUS P2B (BX/PIIX4) w/Intel P3-550 Katmai. No OCing, RAM is perfectly OK (been using it for a year). hda = Quantum Fireball ST3.2A hdb = IBM-DTLA-307045 I know i should have them in separate IDE channels, but for now i was setting up LVM to move another fast/big disk in. Kernel is plain + reiserfs 3.6.25, devfs isn't enabled. GCC is 2.95.2, on redhat 6.2, with lvmtools 0.9. Kernel config & ksymoops attached. I was just trying LVM's vgextend, maybe i'm missing something?? LVM works as long as i don't try to extend the VG. I can do testing/patching without trouble here... **** BAD BOY **** # pvcreate /dev/hdb1 pvcreate -- physical volume "/dev/hdb1" successfully created # pvcreate /dev/hdb2 pvcreate -- physical volume "/dev/hdb2" successfully created # pvcreate /dev/hdb3 pvcreate -- physical volume "/dev/hdb3" successfully created # vgcreate vg0 /dev/hdb1 vgcreate -- INFO: using default physical extent size 4 MB vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte vgcreate -- doing automatic backup of volume group "vg0" vgcreate -- volume group "vg0" successfully created and activated # vgextend vg0 /dev/hdb2 vgextend -- INFO: maximum logical volume size is 255.99 Gigabyte Segmentation fault # pvscan pvscan -- reading all physical volumes (this may take a while...) pvscan -- ACTIVE PV "/dev/hdb1" of VG "vg0" [13.79 GB / 13.79 GB free] pvscan -- inactive PV "/dev/hdb2" is in no VG [13.79 GB] pvscan -- inactive PV "/dev/hdb3" is in no VG [15.37 GB] pvscan -- total: 3 [42.94 GB] / in use: 1 [13.79 GB] / in no VG: 2 [29.16 GB] **** GOOD BOY **** # vgcreate vg0 /dev/hdb1 /dev/hdb2 /dev/hdb3 vgcreate -- INFO: using default physical extent size 4 MB vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte vgcreate -- doing automatic backup of volume group "vg0" vgcreate -- volume group "vg0" successfully created and activated # vgscan vgscan -- reading all physical volumes (this may take a while...) vgscan -- found active volume group "vg0" vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: you may not have an actual VGDA backup of your volume group # vgdisplay --- Volume group --- VG Name vg0 VG Access read/write VG Status available/resizable VG # 0 MAX LV 256 Cur LV 0 Open LV 0 MAX LV Size 255.99 GB Max PV 256 Cur PV 3 Act PV 3 VG Size 42.93 GB PE Size 4 MB Total PE 10991 Alloc PE / Size 0 / 0 Free PE / Size 10991 / 42.93 GB VG UUID T64Tvz-nAb6-0Ew9-B3Qv-VuBy-7wxP-S7E77r -- fdisk partition table for /dev/hdb -- Disk /dev/hdb: 255 heads, 63 sectors, 5606 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hdb1 1 1800 14458468+ 8e Linux LVM /dev/hdb2 1801 3600 14458500 8e Linux LVM /dev/hdb3 3601 5606 16113195 8e Linux LVM
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_ISA=y # CONFIG_SBUS is not set CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set CONFIG_M686FXSR=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_CMPXCHG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_X86_TSC=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_PGE=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_FXSR=y CONFIG_X86_XMM=y # CONFIG_TOSHIBA is not set CONFIG_MICROCODE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set CONFIG_MTRR=y # CONFIG_SMP is not set # CONFIG_X86_UP_IOAPIC is not set # # General setup # CONFIG_NET=y # CONFIG_VISWS is not set CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_NAMES=y # CONFIG_EISA is not set # CONFIG_MCA is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_ACPI=y # CONFIG_APM is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # CONFIG_PARPORT=y CONFIG_PARPORT_PC=y CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_AMIGA is not set # CONFIG_PARPORT_MFC3 is not set # CONFIG_PARPORT_ATARI is not set # CONFIG_PARPORT_SUNBPP is not set # CONFIG_PARPORT_OTHER is not set CONFIG_PARPORT_1284=y # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m CONFIG_BLK_DEV_LVM=y CONFIG_LVM_PROC_FS=y # # Networking options # CONFIG_PACKET=m CONFIG_PACKET_MMAP=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NETLINK_DEV=m CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_RTNETLINK=y CONFIG_NETLINK=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_FWMARK=y CONFIG_IP_ROUTE_NAT=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_TOS=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_ROUTE_LARGE_TABLES=y # CONFIG_IP_PNP is not set CONFIG_NET_IPIP=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_ARPD=y CONFIG_INET_ECN=y CONFIG_SYN_COOKIES=y # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_MIRROR=m CONFIG_IP_NF_NAT=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_MARK=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_COMPAT_IPCHAINS=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IP_NF_COMPAT_IPFWADM=m CONFIG_IP_NF_NAT_NEEDED=y CONFIG_IPV6=m CONFIG_IPV6_EUI64=y CONFIG_IPV6_NO_PB=y # # IPv6: Netfilter Configuration # CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_LIMIT=m CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_MARK=m CONFIG_KHTTPD=m CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=m CONFIG_ATM_MPOA=m # # # CONFIG_IPX=m CONFIG_IPX_INTERN=y CONFIG_ATALK=m CONFIG_DECNET=m # CONFIG_DECNET_SIOCGIFCONF is not set # CONFIG_DECNET_ROUTER is not set CONFIG_BRIDGE=m CONFIG_X25=m CONFIG_LAPB=m # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set CONFIG_ECONET=m CONFIG_ECONET_AUNUDP=y CONFIG_ECONET_NATIVE=y # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # CONFIG_NET_SCHED=y CONFIG_NETLINK=y CONFIG_RTNETLINK=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_CSZ=m CONFIG_NET_SCH_ATM=y CONFIG_NET_SCH_PRIO=m CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_QOS=y CONFIG_NET_ESTIMATOR=y CONFIG_NET_CLS=y CONFIG_NET_CLS_TCINDEX=m CONFIG_NET_CLS_ROUTE4=m CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=m CONFIG_NET_CLS_U32=m CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m CONFIG_NET_CLS_POLICE=y # # Telephony Support # # CONFIG_PHONE is not set # CONFIG_PHONE_IXJ is not set # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set # CONFIG_BLK_DEV_IDEDISK_IBM is not set # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set # CONFIG_BLK_DEV_IDEDISK_WD is not set # CONFIG_BLK_DEV_COMMERIAL is not set # CONFIG_BLK_DEV_TIVO is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=m # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set # CONFIG_BLK_DEV_CMD640_ENHANCED is not set # CONFIG_BLK_DEV_ISAPNP is not set # CONFIG_BLK_DEV_RZ1000 is not set CONFIG_BLK_DEV_IDEPCI=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_AEC62XX_TUNING is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_WDC_ALI15X3 is not set # CONFIG_BLK_DEV_AMD7409 is not set # CONFIG_AMD7409_OVERRIDE is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_HPT34X_AUTODMA is not set # CONFIG_BLK_DEV_HPT366 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_PIIX_TUNING is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX is not set # CONFIG_PDC202XX_BURST is not set # CONFIG_BLK_DEV_OSB4 is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_CHIPSETS is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI support # CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=m CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=m CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y # # SCSI low-level drivers # # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_7000FASST is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA152X is not set CONFIG_SCSI_AHA1542=m # CONFIG_SCSI_AHA1740 is not set CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_TCQ_ON_BY_DEFAULT=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=8 CONFIG_AIC7XXX_PROC_STATS=y CONFIG_AIC7XXX_RESET_DELAY=5 # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_MEGARAID is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_CPQFCTS is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set CONFIG_SCSI_EATA=m CONFIG_SCSI_EATA_TAGGED_QUEUE=y CONFIG_SCSI_EATA_LINKED_COMMANDS=y CONFIG_SCSI_EATA_MAX_TAGS=16 # CONFIG_SCSI_EATA_DMA is not set # CONFIG_SCSI_EATA_PIO is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_GENERIC_NCR5380 is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m # CONFIG_SCSI_IZIP_EPP16 is not set # CONFIG_SCSI_IZIP_SLOW_CTR is not set # CONFIG_SCSI_NCR53C406A is not set CONFIG_SCSI_NCR53C7xx=m CONFIG_SCSI_NCR53C7xx_sync=y CONFIG_SCSI_NCR53C7xx_FAST=y # CONFIG_SCSI_NCR53C7xx_DISCONNECT is not set CONFIG_SCSI_NCR53C8XX=m CONFIG_SCSI_SYM53C8XX=m CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 CONFIG_SCSI_NCR53C8XX_PROFILE=y # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set # CONFIG_SCSI_PAS16 is not set # CONFIG_SCSI_PCI2000 is not set # CONFIG_SCSI_PCI2220I is not set # CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set CONFIG_SCSI_QLOGIC_ISP=m # CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_SEAGATE is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_U14_34F is not set # CONFIG_SCSI_ULTRASTOR is not set CONFIG_SCSI_DEBUG=m # # IEEE 1394 (FireWire) support # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # CONFIG_ARCNET=m CONFIG_ARCNET_1201=m CONFIG_ARCNET_1051=m CONFIG_ARCNET_RAW=m # CONFIG_ARCNET_COM90xx is not set # CONFIG_ARCNET_COM90xxIO is not set # CONFIG_ARCNET_RIM_I is not set # CONFIG_ARCNET_COM20020 is not set # # Appletalk devices # CONFIG_APPLETALK=y # CONFIG_LTPC is not set # CONFIG_COPS is not set CONFIG_IPDDP=m CONFIG_IPDDP_ENCAP=y CONFIG_IPDDP_DECAP=y CONFIG_DUMMY=m CONFIG_BONDING=m CONFIG_EQUALIZER=m CONFIG_TUN=m CONFIG_ETHERTAP=m # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL1 is not set # CONFIG_EL2 is not set # CONFIG_ELPLUS is not set # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_ELMC is not set # CONFIG_ELMC_II is not set CONFIG_VORTEX=m # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_AT1700 is not set # CONFIG_DEPCA is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_AC3200 is not set # CONFIG_APRICOT is not set CONFIG_CS89x0=m CONFIG_TULIP=m CONFIG_DE4X5=m # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=m # CONFIG_EEPRO100_PM is not set # CONFIG_LNE390 is not set # CONFIG_NATSEMI is not set CONFIG_NE2K_PCI=m # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set CONFIG_8139TOO=y # CONFIG_RTL8129 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_WINBOND_840 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_MULTILINK=y CONFIG_PPP_ASYNC=m CONFIG_PPP_SYNC_TTY=m CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPPOE=m CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLIP_SMART=y CONFIG_SLIP_MODE_SLIP6=y # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # CONFIG_TR=y # CONFIG_IBMTR is not set # CONFIG_IBMOL is not set # CONFIG_IBMLS is not set # CONFIG_TMS380TR is not set # CONFIG_SMCTR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set CONFIG_SHAPER=m # # Wan interfaces # CONFIG_WAN=y # CONFIG_HOSTESS_SV11 is not set # CONFIG_COSA is not set # CONFIG_COMX is not set # CONFIG_LANMEDIA is not set # CONFIG_SEALEVEL_4021 is not set CONFIG_SYNCLINK_SYNCPPP=m CONFIG_DLCI=m CONFIG_DLCI_COUNT=24 CONFIG_DLCI_MAX=8 # CONFIG_SDLA is not set CONFIG_LAPBETHER=m CONFIG_X25_ASY=m # CONFIG_SBNI is not set # # ATM drivers # CONFIG_ATM_TCP=m # CONFIG_ATM_ENI is not set # CONFIG_ATM_FIRESTREAM is not set # CONFIG_ATM_ZATM is not set # CONFIG_ATM_NICSTAR is not set # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E_MAYBE is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Old CD-ROM drivers (not SCSI, not IDE) # # CONFIG_CD_NO_IDESCSI is not set # # Input core support # CONFIG_INPUT=y CONFIG_INPUT_KEYBDEV=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_SERIAL=y CONFIG_SERIAL_CONSOLE=y # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 CONFIG_PRINTER=m CONFIG_LP_CONSOLE=y CONFIG_PPDEV=m # # I2C support # CONFIG_I2C=y CONFIG_I2C_ALGOBIT=m CONFIG_I2C_PHILIPSPAR=m CONFIG_I2C_ELV=m CONFIG_I2C_VELLEMAN=m CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ELEKTOR=m CONFIG_I2C_CHARDEV=m # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # # Joysticks # # CONFIG_JOYSTICK is not set # # Input core support is needed for joysticks # # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_SOFT_WATCHDOG=m # CONFIG_WDT is not set # CONFIG_WDTPCI is not set # CONFIG_PCWATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_60XX_WDT is not set # CONFIG_MIXCOMWD is not set # CONFIG_I810_TCO is not set # CONFIG_INTEL_RNG is not set CONFIG_NVRAM=y CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y CONFIG_AGP_INTEL=y # CONFIG_AGP_I810 is not set # CONFIG_AGP_VIA is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_ALI is not set CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_GAMMA is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_MGA is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set CONFIG_ADFS_FS=m CONFIG_ADFS_FS_RW=y CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_BFS_FS=m CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_UMSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_EFS_FS=m # CONFIG_JFFS_FS is not set CONFIG_CRAMFS=m CONFIG_RAMFS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_MINIX_FS=m CONFIG_NTFS_FS=m CONFIG_NTFS_RW=y CONFIG_HPFS_FS=m CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y CONFIG_QNX4FS_FS=m CONFIG_QNX4FS_RW=y CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y CONFIG_SYSV_FS=m CONFIG_SYSV_FS_WRITE=y CONFIG_UDF_FS=m CONFIG_UDF_RW=y CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y # # Network File Systems # CONFIG_CODA_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="iso8859-1" CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y CONFIG_ACORN_PARTITION_ICS=y CONFIG_ACORN_PARTITION_ADFS=y CONFIG_ACORN_PARTITION_POWERTEC=y CONFIG_ACORN_PARTITION_RISCIX=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_950 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set CONFIG_NLS_UTF8=m # # Console drivers # CONFIG_VGA_CONSOLE=y # CONFIG_VIDEO_SELECT is not set # CONFIG_MDA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # # USB Controllers # CONFIG_USB_UHCI_ALT=y # CONFIG_USB_OHCI is not set # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set CONFIG_USB_BLUETOOTH=m CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_WACOM=m # # USB Imaging devices # CONFIG_USB_DC2XX=m CONFIG_USB_MDC800=m CONFIG_USB_SCANNER=m CONFIG_USB_MICROTEK=m # # USB Multimedia devices # # CONFIG_USB_IBMCAM is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_DSBR is not set CONFIG_USB_DABUSB=m # # USB Network adaptors # CONFIG_USB_PLUSB=m CONFIG_USB_PEGASUS=m CONFIG_USB_NET1080=m # # USB port drivers # CONFIG_USB_USS720=m # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_DEBUG=y CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KEYSPAN_USA28=y CONFIG_USB_SERIAL_KEYSPAN_USA28X=y CONFIG_USB_SERIAL_KEYSPAN_USA19=y CONFIG_USB_SERIAL_KEYSPAN_USA18X=y CONFIG_USB_SERIAL_KEYSPAN_USA19W=y CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_OMNINET=m # # USB misc drivers # CONFIG_USB_RIO500=m # # Kernel hacking # CONFIG_MAGIC_SYSRQ=y
ksymoops 2.3.5 on i686 2.4.0. Options used -v /usr/src/linux/vmlinux (specified) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.4.0/ (default) -m /boot/System.map-2.4.0 (specified) Unable to handle kernel NULL pointer dereference at virtual address 0000002c c01e47e7 *pde = 00000000 Oops: 0000 CPU: 0 EIP: 0010:[lvm_do_create_proc_entry_of_pv+27/104] EFLAGS: 00010246 eax: 00002f2f ebx: 00000000 ecx: 00000000 edx: 0000002f esi: 0000002c edi: 0000002c ebp: 00000000 esp: d14f9d8c ds: 0018 es: 0018 ss: 0018 Process vgextend (pid: 2505, stackpage=d14f9000) Stack: 00000000 d1994000 4004fe03 d1994000 d1994000 c01e26a2 d1994000 00000000 08051e90 d1994000 00000001 08051e90 c02d5fa0 c01e03bb d1994000 08051e90 d1b33e40 08051e90 4004fe03 ffffffe7 00000001 0000f1ae 00000282 08051e90 Call Trace: [lvm_do_vg_extend+86/168] [lvm_chr_ioctl+691/1656] [handle_mm_fault+232/340] [__alloc_pages+223/720] [do_anonymous_page+48/140] [do_no_page+50/176] [cached_lookup+16/84] Code: ac 38 e0 75 03 8d 6e ff 84 c0 75 f4 89 ea 85 d2 75 07 89 fa Using defaults from ksymoops -t elf32-i386 -a i386 Code; 00000000 Before first symbol 00000000 <_EIP>: Code; 00000000 Before first symbol 0: ac lods %ds:(%esi),%al Code; 00000001 Before first symbol 1: 38 e0 cmp %ah,%al Code; 00000003 Before first symbol 3: 75 03 jne 8 <_EIP+0x8> 00000008 Before first symbol Code; 00000005 Before first symbol 5: 8d 6e ff lea 0xffffffff(%esi),%ebp Code; 00000008 Before first symbol 8: 84 c0 test %al,%al Code; 0000000a Before first symbol a: 75 f4 jne 0 <_EIP> Code; 0000000c Before first symbol c: 89 ea mov %ebp,%edx Code; 0000000e Before first symbol e: 85 d2 test %edx,%edx Code; 00000010 Before first symbol 10: 75 07 jne 19 <_EIP+0x19> 00000019 Before first symbol Code; 00000012 Before first symbol 12: 89 fa mov %edi,%edx