Rename S3C64XX_SPI_SLAVE_* to S3C64XX_SPI_CS_* to match documentation.

Signed-off-by: Łukasz Stelmach <l.stelm...@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k...@kernel.org>
---
 drivers/spi/spi-s3c64xx.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 3364d362ed21..433b9d77b914 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -29,7 +29,7 @@
 #define S3C64XX_SPI_CH_CFG             0x00
 #define S3C64XX_SPI_CLK_CFG            0x04
 #define S3C64XX_SPI_MODE_CFG           0x08
-#define S3C64XX_SPI_SLAVE_SEL          0x0C
+#define S3C64XX_SPI_CS_REG             0x0C
 #define S3C64XX_SPI_INT_EN             0x10
 #define S3C64XX_SPI_STATUS             0x14
 #define S3C64XX_SPI_TX_DATA            0x18
@@ -64,9 +64,9 @@
 #define S3C64XX_SPI_MODE_TXDMA_ON              (1<<1)
 #define S3C64XX_SPI_MODE_4BURST                        (1<<0)
 
-#define S3C64XX_SPI_SLAVE_AUTO                 (1<<1)
-#define S3C64XX_SPI_SLAVE_SIG_INACT            (1<<0)
-#define S3C64XX_SPI_SLAVE_NSC_CNT_2            (2<<4)
+#define S3C64XX_SPI_CS_NSC_CNT_2               (2<<4)
+#define S3C64XX_SPI_CS_AUTO                    (1<<1)
+#define S3C64XX_SPI_CS_SIG_INACT               (1<<0)
 
 #define S3C64XX_SPI_INT_TRAILING_EN            (1<<6)
 #define S3C64XX_SPI_INT_RX_OVERRUN_EN          (1<<5)
@@ -319,18 +319,18 @@ static void s3c64xx_spi_set_cs(struct spi_device *spi, 
bool enable)
 
        if (enable) {
                if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO)) {
-                       writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+                       writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
                } else {
-                       u32 ssel = readl(sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+                       u32 ssel = readl(sdd->regs + S3C64XX_SPI_CS_REG);
 
-                       ssel |= (S3C64XX_SPI_SLAVE_AUTO |
-                                               S3C64XX_SPI_SLAVE_NSC_CNT_2);
-                       writel(ssel, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+                       ssel |= (S3C64XX_SPI_CS_AUTO |
+                                               S3C64XX_SPI_CS_NSC_CNT_2);
+                       writel(ssel, sdd->regs + S3C64XX_SPI_CS_REG);
                }
        } else {
                if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
-                       writel(S3C64XX_SPI_SLAVE_SIG_INACT,
-                              sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+                       writel(S3C64XX_SPI_CS_SIG_INACT,
+                              sdd->regs + S3C64XX_SPI_CS_REG);
        }
 }
 
@@ -951,9 +951,9 @@ static void s3c64xx_spi_hwinit(struct 
s3c64xx_spi_driver_data *sdd)
        sdd->cur_speed = 0;
 
        if (sci->no_cs)
-               writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL);
+               writel(0, sdd->regs + S3C64XX_SPI_CS_REG);
        else if (!(sdd->port_conf->quirks & S3C64XX_SPI_QUIRK_CS_AUTO))
-               writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + 
S3C64XX_SPI_SLAVE_SEL);
+               writel(S3C64XX_SPI_CS_SIG_INACT, sdd->regs + 
S3C64XX_SPI_CS_REG);
 
        /* Disable Interrupts - we use Polling if not DMA mode */
        writel(0, regs + S3C64XX_SPI_INT_EN);
-- 
2.26.2

Reply via email to