As Rob suggested, use the "mps,switch-frequency-hz" instead of the
"mps,switch-frequency" for switch frequency. Fortunately, the switch
frequency support isn't released, so we can modify it now without
any concern.
Signed-off-by: Jisheng Zhang <jisheng.zh...@synaptics.com>
---
Documentation/devicetree/bindings/regulator/mp886x.txt | 2 +-
drivers/regulator/mp886x.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/regulator/mp886x.txt
b/Documentation/devicetree/bindings/regulator/mp886x.txt
index e747000cebba..b05307bbb0d9 100644
--- a/Documentation/devicetree/bindings/regulator/mp886x.txt
+++ b/Documentation/devicetree/bindings/regulator/mp886x.txt
@@ -10,7 +10,7 @@ Required properties:
values R1 and R2 of the feedback voltage divider in kilo ohms.
Optional properties:
-- mps,switch-frequency: The valid switch frequency in Hertz. Available values
+- mps,switch-frequency-hz: The valid switch frequency in Hertz. Available
values
are: 500000, 750000, 1000000, 1250000, 1500000
Any property defined as part of the core regulator binding, defined in
diff --git a/drivers/regulator/mp886x.c b/drivers/regulator/mp886x.c
index 97dc44c0d663..a84fd74081de 100644
--- a/drivers/regulator/mp886x.c
+++ b/drivers/regulator/mp886x.c
@@ -349,7 +349,7 @@ static int mp886x_i2c_probe(struct i2c_client *client)
config.driver_data = di;
config.of_node = np;
- if (!of_property_read_u32(np, "mps,switch-frequency", &freq))
+ if (!of_property_read_u32(np, "mps,switch-frequency-hz", &freq))
mp886x_set_switch_freq(di, regmap, freq);
ret = mp886x_regulator_register(di, &config);
--
2.28.0
