On Fri, Aug 21, 2020 at 09:35:12PM -0700, Jacob Pan wrote:
> ioasid_set was introduced as an arbitrary token that are shared by a
> group of IOASIDs. For example, if IOASID #1 and #2 are allocated via the
> same ioasid_set*, they are viewed as to belong to the same set.
>
> For guest SVA usages, system-wide IOASID resources need to be
> partitioned such that VMs can have its own quota and being managed
> separately. ioasid_set is the perfect candidate for meeting such
> requirements. This patch redefines and extends ioasid_set with the
> following new fields:
> - Quota
> - Reference count
> - Storage of its namespace
> - The token is stored in the new ioasid_set but with optional types
>
> ioasid_set level APIs are introduced that wires up these new data.
> Existing users of IOASID APIs are converted where a host IOASID set is
> allocated for bare-metal usage.
>
> Signed-off-by: Liu Yi L <yi.l....@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun....@linux.intel.com>
> ---
> drivers/iommu/intel/iommu.c | 27 ++-
> drivers/iommu/intel/pasid.h | 1 +
> drivers/iommu/intel/svm.c | 8 +-
> drivers/iommu/ioasid.c | 390
> +++++++++++++++++++++++++++++++++++++++++---
> include/linux/ioasid.h | 82 ++++++++--
> 5 files changed, 465 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index a3a0b5c8921d..5813eeaa5edb 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -42,6 +42,7 @@
> #include <linux/crash_dump.h>
> #include <linux/numa.h>
> #include <linux/swiotlb.h>
> +#include <linux/ioasid.h>
> #include <asm/irq_remapping.h>
> #include <asm/cacheflush.h>
> #include <asm/iommu.h>
> @@ -103,6 +104,9 @@
> */
> #define INTEL_IOMMU_PGSIZES (~0xFFFUL)
>
> +/* PASIDs used by host SVM */
> +struct ioasid_set *host_pasid_set;
> +
> static inline int agaw_to_level(int agaw)
> {
> return agaw + 2;
> @@ -3103,8 +3107,8 @@ static void intel_vcmd_ioasid_free(ioasid_t ioasid,
> void *data)
> * Sanity check the ioasid owner is done at upper layer, e.g. VFIO
> * We can only free the PASID when all the devices are unbound.
> */
> - if (ioasid_find(NULL, ioasid, NULL)) {
> - pr_alert("Cannot free active IOASID %d\n", ioasid);
> + if (IS_ERR(ioasid_find(host_pasid_set, ioasid, NULL))) {
> + pr_err("Cannot free IOASID %d, not in system set\n", ioasid);
> return;
> }
> vcmd_free_pasid(iommu, ioasid);
> @@ -3288,6 +3292,19 @@ static int __init init_dmars(void)
> if (ret)
> goto free_iommu;
>
> + /* PASID is needed for scalable mode irrespective to SVM */
> + if (intel_iommu_sm) {
> + ioasid_install_capacity(intel_pasid_max_id);
> + /* We should not run out of IOASIDs at boot */
> + host_pasid_set = ioasid_alloc_set(NULL, PID_MAX_DEFAULT,
> + IOASID_SET_TYPE_NULL);
> + if (IS_ERR_OR_NULL(host_pasid_set)) {
> + pr_err("Failed to enable host PASID allocator %lu\n",
> + PTR_ERR(host_pasid_set));
> + intel_iommu_sm = 0;
> + }
> + }
> +
> /*
> * for each drhd
> * enable fault log
> @@ -5149,7 +5166,7 @@ static void auxiliary_unlink_device(struct dmar_domain
> *domain,
> domain->auxd_refcnt--;
>
> if (!domain->auxd_refcnt && domain->default_pasid > 0)
> - ioasid_free(domain->default_pasid);
> + ioasid_free(host_pasid_set, domain->default_pasid);
> }
>
> static int aux_domain_add_dev(struct dmar_domain *domain,
> @@ -5167,7 +5184,7 @@ static int aux_domain_add_dev(struct dmar_domain
> *domain,
> int pasid;
>
> /* No private data needed for the default pasid */
> - pasid = ioasid_alloc(NULL, PASID_MIN,
> + pasid = ioasid_alloc(host_pasid_set, PASID_MIN,
> pci_max_pasids(to_pci_dev(dev)) - 1,
> NULL);
> if (pasid == INVALID_IOASID) {
> @@ -5210,7 +5227,7 @@ static int aux_domain_add_dev(struct dmar_domain
> *domain,
> spin_unlock(&iommu->lock);
> spin_unlock_irqrestore(&device_domain_lock, flags);
> if (!domain->auxd_refcnt && domain->default_pasid > 0)
> - ioasid_free(domain->default_pasid);
> + ioasid_free(host_pasid_set, domain->default_pasid);
>
> return ret;
> }
> diff --git a/drivers/iommu/intel/pasid.h b/drivers/iommu/intel/pasid.h
> index c9850766c3a9..ccdc23446015 100644
> --- a/drivers/iommu/intel/pasid.h
> +++ b/drivers/iommu/intel/pasid.h
> @@ -99,6 +99,7 @@ static inline bool pasid_pte_is_present(struct pasid_entry
> *pte)
> }
>
> extern u32 intel_pasid_max_id;
> +extern struct ioasid_set *host_pasid_set;
> int intel_pasid_alloc_id(void *ptr, int start, int end, gfp_t gfp);
> void intel_pasid_free_id(int pasid);
> void *intel_pasid_lookup_id(int pasid);
> diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
> index 37a9beabc0ca..634e191ca2c3 100644
> --- a/drivers/iommu/intel/svm.c
> +++ b/drivers/iommu/intel/svm.c
> @@ -551,7 +551,7 @@ intel_svm_bind_mm(struct device *dev, int flags, struct
> svm_dev_ops *ops,
> pasid_max = intel_pasid_max_id;
>
> /* Do not use PASID 0, reserved for RID to PASID */
> - svm->pasid = ioasid_alloc(NULL, PASID_MIN,
> + svm->pasid = ioasid_alloc(host_pasid_set, PASID_MIN,
> pasid_max - 1, svm);
> if (svm->pasid == INVALID_IOASID) {
> kfree(svm);
> @@ -568,7 +568,7 @@ intel_svm_bind_mm(struct device *dev, int flags, struct
> svm_dev_ops *ops,
> if (mm) {
> ret = mmu_notifier_register(&svm->notifier, mm);
> if (ret) {
> - ioasid_free(svm->pasid);
> + ioasid_free(host_pasid_set, svm->pasid);
> kfree(svm);
> kfree(sdev);
> goto out;
> @@ -586,7 +586,7 @@ intel_svm_bind_mm(struct device *dev, int flags, struct
> svm_dev_ops *ops,
> if (ret) {
> if (mm)
> mmu_notifier_unregister(&svm->notifier, mm);
> - ioasid_free(svm->pasid);
> + ioasid_free(host_pasid_set, svm->pasid);
> kfree(svm);
> kfree(sdev);
> goto out;
> @@ -655,7 +655,7 @@ static int intel_svm_unbind_mm(struct device *dev, int
> pasid)
> kfree_rcu(sdev, rcu);
>
> if (list_empty(&svm->devs)) {
> - ioasid_free(svm->pasid);
> + ioasid_free(host_pasid_set, svm->pasid);
> if (svm->mm)
> mmu_notifier_unregister(&svm->notifier,
> svm->mm);
> list_del(&svm->list);
> diff --git a/drivers/iommu/ioasid.c b/drivers/iommu/ioasid.c
> index 5f63af07acd5..f73b3dbfc37a 100644
> --- a/drivers/iommu/ioasid.c
> +++ b/drivers/iommu/ioasid.c
> @@ -1,22 +1,58 @@
> // SPDX-License-Identifier: GPL-2.0
> /*
> * I/O Address Space ID allocator. There is one global IOASID space, split
> into
> - * subsets. Users create a subset with DECLARE_IOASID_SET, then allocate and
> - * free IOASIDs with ioasid_alloc and ioasid_free.
> + * subsets. Users create a subset with ioasid_alloc_set, then allocate/free
> IDs
> + * with ioasid_alloc and ioasid_free.
> */
> -#include <linux/ioasid.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> #include <linux/xarray.h>
> +#include <linux/ioasid.h>
Spurious change (best keep the includes in alphabetical order)
> +
> +static DEFINE_XARRAY_ALLOC(ioasid_sets);
I'd prefer keeping all static variables together
> +enum ioasid_state {
> + IOASID_STATE_INACTIVE,
> + IOASID_STATE_ACTIVE,
> + IOASID_STATE_FREE_PENDING,
> +};
>
> +/**
> + * struct ioasid_data - Meta data about ioasid
> + *
> + * @id: Unique ID
> + * @users Number of active users
> + * @state Track state of the IOASID
> + * @set Meta data of the set this IOASID belongs to
> + * @private Private data associated with the IOASID
> + * @rcu For free after RCU grace period
nit: it would be nicer to follow the struct order
> + */
> struct ioasid_data {
> ioasid_t id;
> struct ioasid_set *set;
> + refcount_t users;
> + enum ioasid_state state;
> void *private;
> struct rcu_head rcu;
> };
>
> +/* Default to PCIe standard 20 bit PASID */
> +#define PCI_PASID_MAX 0x100000
> +static ioasid_t ioasid_capacity = PCI_PASID_MAX;
> +static ioasid_t ioasid_capacity_avail = PCI_PASID_MAX;
> +
> +void ioasid_install_capacity(ioasid_t total)
> +{
> + ioasid_capacity = ioasid_capacity_avail = total;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_install_capacity);
> +
> +ioasid_t ioasid_get_capacity()
> +{
> + return ioasid_capacity;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_get_capacity);
> +
> /*
> * struct ioasid_allocator_data - Internal data structure to hold information
> * about an allocator. There are two types of allocators:
> @@ -306,11 +342,23 @@ ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t
> min, ioasid_t max,
> {
> struct ioasid_data *data;
> void *adata;
> - ioasid_t id;
> + ioasid_t id = INVALID_IOASID;
> +
> + spin_lock(&ioasid_allocator_lock);
> + /* Check if the IOASID set has been allocated and initialized */
> + if (WARN_ON(xa_load(&ioasid_sets, set->sid) != set)) {
> + pr_warn("Invalid set\n");
WARN_ON() is sufficient
> + goto done_unlock;
> + }
> +
> + if (set->quota <= set->nr_ioasids) {
> + pr_err("IOASID set %d out of quota %d\n", set->sid, set->quota);
As this can be called directly by userspace via VFIO, I wonder if we
should remove non-bug error messages like this one to avoid leaking
internal IDs, or at least rate-limit them. We already have a few, perhaps
we should deal with them before the VFIO_IOMMU_ALLOC_PASID patches land?
> + goto done_unlock;
> + }
>
> data = kzalloc(sizeof(*data), GFP_ATOMIC);
> if (!data)
> - return INVALID_IOASID;
> + goto done_unlock;
>
> data->set = set;
> data->private = private;
> @@ -319,7 +367,6 @@ ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t
> min, ioasid_t max,
> * Custom allocator needs allocator data to perform platform specific
> * operations.
> */
> - spin_lock(&ioasid_allocator_lock);
> adata = active_allocator->flags & IOASID_ALLOCATOR_CUSTOM ?
> active_allocator->ops->pdata : data;
> id = active_allocator->ops->alloc(min, max, adata);
> if (id == INVALID_IOASID) {
> @@ -335,42 +382,339 @@ ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t
> min, ioasid_t max,
> goto exit_free;
> }
> data->id = id;
> + data->state = IOASID_STATE_ACTIVE;
> + refcount_set(&data->users, 1);
> +
> + /* Store IOASID in the per set data */
> + if (xa_err(xa_store(&set->xa, id, data, GFP_ATOMIC))) {
> + pr_err("Failed to ioasid %d in set %d\n", id, set->sid);
"Failed to store"
Don't we need to call active_allocator->ops->free()?
And I need to think about this more, but do you see any issue with
revoking here the data that we published into the xarray above through
alloc()? We might need to free data in an RCU callback.
> + goto exit_free;
> + }
> + set->nr_ioasids++;
> + goto done_unlock;
>
> - spin_unlock(&ioasid_allocator_lock);
> - return id;
> exit_free:
> - spin_unlock(&ioasid_allocator_lock);
> kfree(data);
> - return INVALID_IOASID;
> +done_unlock:
> + spin_unlock(&ioasid_allocator_lock);
> + return id;
> }
> EXPORT_SYMBOL_GPL(ioasid_alloc);
>
> +static void ioasid_do_free(struct ioasid_data *data)
> +{
> + struct ioasid_data *ioasid_data;
> + struct ioasid_set *sdata;
> +
> + active_allocator->ops->free(data->id, active_allocator->ops->pdata);
> + /* Custom allocator needs additional steps to free the xa element */
> + if (active_allocator->flags & IOASID_ALLOCATOR_CUSTOM) {
> + ioasid_data = xa_erase(&active_allocator->xa, data->id);
> + kfree_rcu(ioasid_data, rcu);
> + }
> +
> + sdata = xa_load(&ioasid_sets, data->set->sid);
> + if (!sdata) {
> + pr_err("No set %d for IOASID %d\n", data->set->sid,
> + data->id);
> + return;
I don't think we're allowed to fail at this point. If we need more
sanity-check on the parameters, it should be before we start removing from
the active_allocator above. Otherwise this should be a WARN
> + }
> + xa_erase(&sdata->xa, data->id);
> + sdata->nr_ioasids--;
Would be nicer to perform the cleanup in the order opposite from
ioasid_alloc()
> +}
> +
> +static void ioasid_free_locked(struct ioasid_set *set, ioasid_t ioasid)
> +{
> + struct ioasid_data *data;
> +
> + data = xa_load(&active_allocator->xa, ioasid);
> + if (!data) {
> + pr_err("Trying to free unknown IOASID %u\n", ioasid);
> + return;
> + }
> +
> + if (data->set != set) {
> + pr_warn("Cannot free IOASID %u due to set ownership\n", ioasid);
> + return;
> + }
> + data->state = IOASID_STATE_FREE_PENDING;
> +
> + if (!refcount_dec_and_test(&data->users))
> + return;
> +
> + ioasid_do_free(data);
> +}
> +
> /**
> - * ioasid_free - Free an IOASID
> - * @ioasid: the ID to remove
> + * ioasid_free - Drop reference on an IOASID. Free if refcount drops to 0,
> + * including free from its set and system-wide list.
> + * @set: The ioasid_set to check permission with. If not NULL, IOASID
> + * free will fail if the set does not match.
> + * @ioasid: The IOASID to remove
> */
> -void ioasid_free(ioasid_t ioasid)
> +void ioasid_free(struct ioasid_set *set, ioasid_t ioasid)
> {
> - struct ioasid_data *ioasid_data;
> + spin_lock(&ioasid_allocator_lock);
> + ioasid_free_locked(set, ioasid);
> + spin_unlock(&ioasid_allocator_lock);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_free);
>
> +/**
> + * ioasid_alloc_set - Allocate a new IOASID set for a given token
> + *
> + * @token: Unique token of the IOASID set, cannot be NULL
> + * @quota: Quota allowed in this set. Only for new set creation
> + * @flags: Special requirements
There is no @flags, but @type is missing
> + *
> + * IOASID can be limited system-wide resource that requires quota management.
> + * If caller does not wish to enforce quota, use IOASID_SET_NO_QUOTA flag.
The flag isn't introduced in this patch. How about passing @quota == 0 in
this case? For now I'm fine with leaving this as TODO and returning
-EINVAL.
> + *
> + * Token will be stored in the ioasid_set returned. A reference will be taken
> + * upon finding a matching set or newly created set.
> + * IOASID allocation within the set and other per set operations will use
> + * the retured ioasid_set *.
> + *
> + */
> +struct ioasid_set *ioasid_alloc_set(void *token, ioasid_t quota, int type)
> +{
> + struct ioasid_set *sdata;
> + unsigned long index;
> + ioasid_t id;
> +
> + if (type >= IOASID_SET_TYPE_NR)
> + return ERR_PTR(-EINVAL);
> +
> + /*
> + * Need to check space available if we share system-wide quota.
> + * TODO: we may need to support quota free sets in the future.
> + */
> spin_lock(&ioasid_allocator_lock);
> - ioasid_data = xa_load(&active_allocator->xa, ioasid);
> - if (!ioasid_data) {
> - pr_err("Trying to free unknown IOASID %u\n", ioasid);
> + if (quota > ioasid_capacity_avail) {
> + pr_warn("Out of IOASID capacity! ask %d, avail %d\n",
> + quota, ioasid_capacity_avail);
> + sdata = ERR_PTR(-ENOSPC);
> goto exit_unlock;
> }
>
> - active_allocator->ops->free(ioasid, active_allocator->ops->pdata);
> - /* Custom allocator needs additional steps to free the xa element */
> - if (active_allocator->flags & IOASID_ALLOCATOR_CUSTOM) {
> - ioasid_data = xa_erase(&active_allocator->xa, ioasid);
> - kfree_rcu(ioasid_data, rcu);
> + /*
> + * Token is only unique within its types but right now we have only
> + * mm type. If we have more token types, we have to match type as well.
> + */
> + switch (type) {
> + case IOASID_SET_TYPE_MM:
> + /* Search existing set tokens, reject duplicates */
> + xa_for_each(&ioasid_sets, index, sdata) {
> + if (sdata->token == token &&
> + sdata->type == IOASID_SET_TYPE_MM) {
Should be aligned at the "if ("
According to the function doc, shouldn't we take a reference to the set in
this case, and return it?
"A reference will be taken upon finding a matching set or newly created
set."
However it might be better to separate the two functionalities into
ioasid_alloc_set() and ioasid_find_set(). Because two modules can want to
work on the same set for an mm, but they won't pass the same @quota,
right? So it'd make more sense for one of them (VFIO) to alloc the set
and the other to reuse it.
> + sdata = ERR_PTR(-EEXIST);
> + goto exit_unlock;
> + }
> + }
> + break;
> + case IOASID_SET_TYPE_NULL:
> + if (!token)
> + break;
> + fallthrough;
> + default:
> + pr_err("Invalid token and IOASID type\n");
> + sdata = ERR_PTR(-EINVAL);
> + goto exit_unlock;
> }
>
> + /* REVISIT: may support set w/o quota, use system available */
> + if (!quota) {
Maybe move this next to the other quota check above
> + sdata = ERR_PTR(-EINVAL);
> + goto exit_unlock;
> + }
> +
> + sdata = kzalloc(sizeof(*sdata), GFP_ATOMIC);
> + if (!sdata) {
> + sdata = ERR_PTR(-ENOMEM);
> + goto exit_unlock;
> + }
> +
> + if (xa_alloc(&ioasid_sets, &id, sdata,
> + XA_LIMIT(0, ioasid_capacity_avail - quota),
Why this limit? sid could just be an arbitrary u32 (xa_limit_32b)
> + GFP_ATOMIC)) {
> + kfree(sdata);
> + sdata = ERR_PTR(-ENOSPC);
> + goto exit_unlock;
> + }
> +
> + sdata->token = token;
> + sdata->type = type;
> + sdata->quota = quota;
> + sdata->sid = id;
> + refcount_set(&sdata->ref, 1);
> +
> + /*
> + * Per set XA is used to store private IDs within the set, get ready
> + * for ioasid_set private ID and system-wide IOASID allocation
> + * results.
> + */
> + xa_init_flags(&sdata->xa, XA_FLAGS_ALLOC);
Since it's only used for storage, you could use xa_init()
> + ioasid_capacity_avail -= quota;
> +
> exit_unlock:
> spin_unlock(&ioasid_allocator_lock);
> +
> + return sdata;
> }
> -EXPORT_SYMBOL_GPL(ioasid_free);
> +EXPORT_SYMBOL_GPL(ioasid_alloc_set);
> +
> +void ioasid_set_get_locked(struct ioasid_set *set)
> +{
> + if (WARN_ON(xa_load(&ioasid_sets, set->sid) != set)) {
> + pr_warn("Invalid set data\n");
WARN_ON() is sufficient
> + return;
> + }
> +
> + refcount_inc(&set->ref);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_set_get_locked);
Why is this function public, is it for an iterator? Might want to add a
lockdep_assert_held() annotation.
> +
> +void ioasid_set_get(struct ioasid_set *set)
> +{
> + spin_lock(&ioasid_allocator_lock);
> + ioasid_set_get_locked(set);
> + spin_unlock(&ioasid_allocator_lock);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_set_get);
> +
> +void ioasid_set_put_locked(struct ioasid_set *set)
> +{
> + struct ioasid_data *entry;
> + unsigned long index;
> +
> + if (WARN_ON(xa_load(&ioasid_sets, set->sid) != set)) {
> + pr_warn("Invalid set data\n");
WARN_ON() is sufficient
> + return;
> + }
> +
> + if (!refcount_dec_and_test(&set->ref)) {
> + pr_debug("%s: IOASID set %d has %d users\n",
> + __func__, set->sid, refcount_read(&set->ref));
> + return;
> + }
> +
> + /* The set is already empty, we just destroy the set. */
> + if (xa_empty(&set->xa))
> + goto done_destroy;
> +
> + /*
> + * Free all PASIDs from system-wide IOASID pool, all subscribers gets
> + * notified and do cleanup of their own.
> + * Note that some references of the IOASIDs within the set can still
> + * be held after the free call. This is OK in that the IOASIDs will be
> + * marked inactive, the only operations can be done is ioasid_put.
> + * No need to track IOASID set states since there is no reclaim phase.
> + */
> + xa_for_each(&set->xa, index, entry) {
> + ioasid_free_locked(set, index);
> + /* Free from per set private pool */
> + xa_erase(&set->xa, index);
> + }
> +
> +done_destroy:
> + /* Return the quota back to system pool */
> + ioasid_capacity_avail += set->quota;
> + kfree_rcu(set, rcu);
> +
> + /*
> + * Token got released right away after the ioasid_set is freed.
> + * If a new set is created immediately with the newly released token,
> + * it will not allocate the same IOASIDs unless they are reclaimed.
> + */
> + xa_erase(&ioasid_sets, set->sid);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_set_put_locked);
Same comment as ioasid_set_get_locked
> +
> +/**
> + * ioasid_set_put - Drop a reference to the IOASID set. Free all IOASIDs
> within
> + * the set if there are no more users.
> + *
> + * @set: The IOASID set ID to be freed
> + *
> + * If refcount drops to zero, all IOASIDs allocated within the set will be
> + * freed.
> + */
> +void ioasid_set_put(struct ioasid_set *set)
> +{
> + spin_lock(&ioasid_allocator_lock);
> + ioasid_set_put_locked(set);
> + spin_unlock(&ioasid_allocator_lock);
> +}
> +EXPORT_SYMBOL_GPL(ioasid_set_put);
> +
> +/**
> + * ioasid_adjust_set - Adjust the quota of an IOASID set
> + * @set: IOASID set to be assigned
> + * @quota: Quota allowed in this set
> + *
> + * Return 0 on success. If the new quota is smaller than the number of
> + * IOASIDs already allocated, -EINVAL will be returned. No change will be
> + * made to the existing quota.
> + */
> +int ioasid_adjust_set(struct ioasid_set *set, int quota)
> +{
> + int ret = 0;
> +
> + spin_lock(&ioasid_allocator_lock);
> + if (set->nr_ioasids > quota) {
> + pr_err("New quota %d is smaller than outstanding IOASIDs %d\n",
> + quota, set->nr_ioasids);
> + ret = -EINVAL;
> + goto done_unlock;
> + }
> +
> + if (quota >= ioasid_capacity_avail) {
> + ret = -ENOSPC;
> + goto done_unlock;
> + }
> +
> + /* Return the delta back to system pool */
> + ioasid_capacity_avail += set->quota - quota;
I think this is correct as long as the above check is fixed (as pointed
out by Baolu). A check that quota >= 0 could be nice too.
> +
> + /*
> + * May have a policy to prevent giving all available IOASIDs
> + * to one set. But we don't enforce here, it should be in the
> + * upper layers.
> + */
> + set->quota = quota;
> +
> +done_unlock:
> + spin_unlock(&ioasid_allocator_lock);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_adjust_set);
> +
> +/**
> + * ioasid_set_for_each_ioasid - Iterate over all the IOASIDs within the set
> + *
> + * Caller must hold a reference of the set and handles its own locking.
> + */
> +int ioasid_set_for_each_ioasid(struct ioasid_set *set,
> + void (*fn)(ioasid_t id, void *data),
> + void *data)
> +{
> + struct ioasid_data *entry;
> + unsigned long index;
> + int ret = 0;
> +
> + if (xa_empty(&set->xa)) {
Who calls this function? Empty xa may be a normal use-case if the caller
just uses it for sweeping, so pr_warn() could be problematic. The returned
value also isn't particularly accurate if concurrent ioasid_alloc/free are
allowed, so I'd drop this.
> + pr_warn("No IOASIDs in the set %d\n", set->sid);
> + return -ENOENT;
> + }
> +
> + xa_for_each(&set->xa, index, entry) {
> + fn(index, data);
> + }
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(ioasid_set_for_each_ioasid);
>
> /**
> * ioasid_find - Find IOASID data
> diff --git a/include/linux/ioasid.h b/include/linux/ioasid.h
> index 9c44947a68c8..412d025d440e 100644
> --- a/include/linux/ioasid.h
> +++ b/include/linux/ioasid.h
> @@ -10,8 +10,35 @@ typedef unsigned int ioasid_t;
> typedef ioasid_t (*ioasid_alloc_fn_t)(ioasid_t min, ioasid_t max, void
> *data);
> typedef void (*ioasid_free_fn_t)(ioasid_t ioasid, void *data);
>
> +/* IOASID set types */
> +enum ioasid_set_type {
> + IOASID_SET_TYPE_NULL = 1, /* Set token is NULL */
> + IOASID_SET_TYPE_MM, /* Set token is a mm_struct,
> + * i.e. associated with a process
> + */
> + IOASID_SET_TYPE_NR,
> +};
> +
> +/**
> + * struct ioasid_set - Meta data about ioasid_set
> + * @type: Token types and other features
nit: doesn't follow struct order
> + * @token: Unique to identify an IOASID set
> + * @xa: XArray to store ioasid_set private IDs, can be used for
> + * guest-host IOASID mapping, or just a private IOASID namespace.
> + * @quota: Max number of IOASIDs can be allocated within the set
> + * @nr_ioasids Number of IOASIDs currently allocated in the set
> + * @sid: ID of the set
> + * @ref: Reference count of the users
> + */
> struct ioasid_set {
> - int dummy;
> + void *token;
> + struct xarray xa;
> + int type;
> + int quota;
> + int nr_ioasids;
> + int sid;
> + refcount_t ref;
> + struct rcu_head rcu;
> };
>
> /**
> @@ -29,31 +56,64 @@ struct ioasid_allocator_ops {
> void *pdata;
> };
>
> -#define DECLARE_IOASID_SET(name) struct ioasid_set name = { 0 }
> -
> #if IS_ENABLED(CONFIG_IOASID)
> +void ioasid_install_capacity(ioasid_t total);
> +ioasid_t ioasid_get_capacity(void);
> +struct ioasid_set *ioasid_alloc_set(void *token, ioasid_t quota, int type);
> +int ioasid_adjust_set(struct ioasid_set *set, int quota);
> +void ioasid_set_get_locked(struct ioasid_set *set);
> +void ioasid_set_put_locked(struct ioasid_set *set);
> +void ioasid_set_put(struct ioasid_set *set);
These three functions need a stub for !CONFIG_IOASID
> +
> ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min, ioasid_t max,
> void *private);
> -void ioasid_free(ioasid_t ioasid);
> -void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
> - bool (*getter)(void *));
> +void ioasid_free(struct ioasid_set *set, ioasid_t ioasid);
> +
> +bool ioasid_is_active(ioasid_t ioasid);
Not implemented by this series?
> +
> +void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid, bool
> (*getter)(void *));
Spurious change
> +int ioasid_attach_data(ioasid_t ioasid, void *data);
> int ioasid_register_allocator(struct ioasid_allocator_ops *allocator);
> void ioasid_unregister_allocator(struct ioasid_allocator_ops *allocator);
> -int ioasid_attach_data(ioasid_t ioasid, void *data);
Spurious change?
> -
> +void ioasid_is_in_set(struct ioasid_set *set, ioasid_t ioasid);
Not implemented here
> +int ioasid_set_for_each_ioasid(struct ioasid_set *sdata,
> + void (*fn)(ioasid_t id, void *data),
> + void *data);
Needs a stub for !CONFIG_IOASID
> #else /* !CONFIG_IOASID */
> +static inline void ioasid_install_capacity(ioasid_t total)
> +{
> +}
> +
> +static inline ioasid_t ioasid_get_capacity(void)
> +{
> + return 0;
> +}
> +
> static inline ioasid_t ioasid_alloc(struct ioasid_set *set, ioasid_t min,
> ioasid_t max, void *private)
> {
> return INVALID_IOASID;
> }
>
> -static inline void ioasid_free(ioasid_t ioasid)
> +static inline void ioasid_free(struct ioasid_set *set, ioasid_t ioasid)
> +{
> +}
> +
> +static inline bool ioasid_is_active(ioasid_t ioasid)
> +{
> + return false;
> +}
> +
> +static inline struct ioasid_set *ioasid_alloc_set(void *token, ioasid_t
> quota, int type)
> +{
> + return ERR_PTR(-ENOTSUPP);
> +}
> +
> +static inline void ioasid_set_put(struct ioasid_set *set)
> {
> }
>
> -static inline void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
> - bool (*getter)(void *))
> +static inline void *ioasid_find(struct ioasid_set *set, ioasid_t ioasid,
> bool (*getter)(void *))
Spurious change
Thanks,
Jean
> {
> return NULL;
> }
> --
> 2.7.4
>
