Add AE-7 quirk data for setting of microphone. The AE-7 has no front
panel connector, so only rear-mic/line-in have new commands.
Signed-off-by: Connor McAdams <conmanx...@gmail.com>
---
sound/pci/hda/patch_ca0132.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index dcc8d29d934c..8c6e38734489 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4997,6 +4997,15 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
tmp = FLOAT_THREE;
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
+ tmp = FLOAT_THREE;
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
tmp = FLOAT_ONE;
break;
@@ -5042,6 +5051,14 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
case QUIRK_AE5:
ca0113_mmio_command_set(codec, 0x30, 0x28, 0x00);
break;
+ case QUIRK_AE7:
+ ca0113_mmio_command_set(codec, 0x30, 0x28, 0x3f);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICIN2,
+ SR_96_000);
+ chipio_set_conn_rate(codec, MEM_CONNID_MICOUT2,
+ SR_96_000);
+ dspio_set_uint_param(codec, 0x80, 0x01, FLOAT_ZERO);
+ break;
default:
break;
}
@@ -5051,7 +5068,10 @@ static int ca0132_alt_select_in(struct hda_codec *codec)
if (ca0132_quirk(spec) == QUIRK_R3DI)
chipio_set_conn_rate(codec, 0x0F, SR_96_000);
- tmp = FLOAT_ZERO;
+ if (ca0132_quirk(spec) == QUIRK_AE7)
+ tmp = FLOAT_THREE;
+ else
+ tmp = FLOAT_ZERO;
dspio_set_uint_param(codec, 0x80, 0x00, tmp);
switch (ca0132_quirk(spec)) {
--
2.20.1
