Hi,
On 26/8/2020 2:59 pm, Krzysztof Kozlowski wrote:
On Tue, Aug 18, 2020 at 02:57:20PM +0800, Ramuthevar,Vadivel MuruganX wrote:
From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthe...@linux.intel.com>
Switch to GENMASK() for VBUS detection macro.
Signed-off-by: Ramuthevar Vadivel Murugan
<vadivel.muruganx.ramuthe...@linux.intel.com>
---
drivers/extcon/extcon-ptn5150.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
This is too simple change, should be squashed with 1, 3, 4 and 5.
There is no point to split each change a define to use BIT or GENMASK.
Thank you for the review comments and suggestions.
Sure, I will squash it as mentioned patches mentioned above.
Best Regards
Vadivel
Best regards,
Krzysztof
diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c
index 5d9a8767646b..c816a6c1e05c 100644
--- a/drivers/extcon/extcon-ptn5150.c
+++ b/drivers/extcon/extcon-ptn5150.c
@@ -42,9 +42,7 @@ enum ptn5150_reg {
#define PTN5150_REG_CC_PORT_ATTACHMENT_MASK \
(0x7 << PTN5150_REG_CC_PORT_ATTACHMENT_SHIFT)
-#define PTN5150_REG_CC_VBUS_DETECTION_SHIFT 7
-#define PTN5150_REG_CC_VBUS_DETECTION_MASK \
- (0x1 << PTN5150_REG_CC_VBUS_DETECTION_SHIFT)
+#define PTN5150_REG_CC_VBUS_DETECTION BIT(7)
#define PTN5150_REG_INT_CABLE_ATTACH_SHIFT 0
#define PTN5150_REG_INT_CABLE_ATTACH_MASK \
@@ -130,9 +128,8 @@ static void ptn5150_irq_work(struct work_struct *work)
case PTN5150_UFP_ATTACHED:
extcon_set_state_sync(info->edev, EXTCON_USB,
false);
- vbus = ((reg_data &
- PTN5150_REG_CC_VBUS_DETECTION_MASK) >>
- PTN5150_REG_CC_VBUS_DETECTION_SHIFT);
+ vbus = FIELD_GET(PTN5150_REG_CC_VBUS_DETECTION,
+ reg_data);
if (vbus)
gpiod_set_value(info->vbus_gpiod, 0);
else
--
2.11.0
