Hello Jeff, Yes it is. I'll keep testing with previous kernels.
Dmesg does look different with 2.6.23 vs 2.6.24-rc2 This is 2.6.23 : scsi8 : pata_jmicron scsi9 : pata_jmicron ata9: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c102 bmdma 0x000000000001c400 irq 17 ata10: PATA max UDMA/100 cmd 0x000000000001c200 ctl 0x000000000001c302 bmdma 0x000000000001c408 irq 17 ata9.00: ATAPI: BENQ DVD DD DW1640, BSRB, max UDMA/33 ata9.00: configured for UDMA/33 ata9: EH pending after completion, repeating EH (cnt=4) scsi 8:0:0:0: CD-ROM BENQ DVD DD DW1640 BSRB PQ: 0 ANSI: 5 This is 2.6.24-rc2 : scsi8 : pata_jmicron scsi9 : pata_jmicron ata9: PATA max UDMA/100 cmd 0xc000 ctl 0xc100 bmdma 0xc400 irq 17 ata10: PATA max UDMA/100 cmd 0xc200 ctl 0xc300 bmdma 0xc408 irq 17 ata9.00: ATAPI: BENQ DVD DD DW1640, BSRB, max UDMA/33 ata9.00: configured for UDMA/33 scsi 8:0:0:0: CD-ROM BENQ DVD DD DW1640 BSRB PQ: 0 ANSI: 5 Regards, Will Trives On Sat, 2007-11-10 at 18:35 -0500, Jeff Garzik wrote: > Will Trives wrote: > > Hello, > > > > Motherboard: Gigabyte GA-P35-DS4 (rev. 1.1) > > Chipset: Intel P35 + ICH9R > > PATA port runs off JMicron controller > > CD/DVD Device: BENQ DW1640 16X > > > > I cannot access my dvd burner under 2.6.24-rc2, I have no problems under > > 2.6.23. Basically the drive is detected OK, everything looks ok but as > > soon as I go to use it errors like this occur: > > Is 2.6.24-rc1 also broken? > > Jeff > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/