The SP805 binding sets the name for the actual watchdog clock to "wdog_clk" (with an underscore).
Change the name in the DTs for Broadcom platforms to match that. The Linux and U-Boot driver use the *first* clock for this purpose anyway, so it does not break anything. Signed-off-by: Andre Przywara <[email protected]> --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +- arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 15f7b0ed3836..6a5fc55f0a4e 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -576,7 +576,7 @@ reg = <0x66090000 0x1000>; interrupts = <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>; clocks = <&iprocslow>, <&iprocslow>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; }; gpio_g: gpio@660a0000 { diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi index 0098dfdef96c..b425b12c3ed2 100644 --- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi +++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi @@ -438,7 +438,7 @@ reg = <0x000c0000 0x1000>; interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>; - clock-names = "wdogclk", "apb_pclk"; + clock-names = "wdog_clk", "apb_pclk"; timeout-sec = <60>; }; -- 2.17.1
