Hi guys, Please find here v4: - addressing Viresh's comments on patches 1/5 and 3/5, and - with his Acked-by applied for the rest of the patches; - v3 can be found at [3], and - this is based on linux-next 20200827.
Many thanks for the review, Ionela. --- v2->v3 - v2 can be found at [2] - 1/5 was introduced to check input frequencies to arch_set_freq_scale() as recommended by Rafael - The previous 2/7 was squashed into 1/7 - now 2/5, with additions to the changelog as suggested by Rafael. - The previous 3/7 (BL_SWITCHER handling) was dropped to be handled in a separate patch. This does not change the current functionality. - The previous 4/7 - now 3/5 is simplified as suggested by Viresh. - 3/5 - cpufreq_supports_freq_invariance() replaces cpufreq_sets_freq_scale(). The meaning chosen for cpufreq_supports_freq_invariance() is whether it can set the frequency scale factor, not whether arch_set_freq_scale() actually does. - 4/5 - Change after Catalin's Ack: The changes to arch_set_thermal_pressure() were dropped as they were done in a separate patch. Therefore this patch now has a subset of the previous changes at 5/7 - 5/5 - Change after Catalin's Ack: s/cpufreq_sets_freq_scale/cpufreq_supports_freq_invariance - v3 is based on linux-next 20200814 v1 -> v2: - v1 can be found at [1] - No cpufreq flags are introduced - Previous patches 2/8 and 3/8 were squashed in this series under 1/7, to ensure bisection. - 2/7 was introduced as a proposal for Viresh's suggestion to use policy->cur in the call to arch_set_freq_scale() and is extended to support drivers that implement the target() callback as well - Additional commit message changes are added to 1/7 and 2/7, to clarify that the definition of arch_set_freq_scale() will filter settings of the scale factor, if unwanted - 3/7 disables setting of the scale factor for CONFIG_BL_SWITCHER, as Dietmar suggested - Small change introduced in 4/7 to disable cpufreq-based frequency invariance for the users of the default arch_set_freq_scale() call which will not actually set a scale factor - build issue solved (reported by 0day test) - v2 is based on linux-next 20200716 - all functional tests in v1 were repeated for v2 [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://lore.kernel.org/lkml/[email protected]/ [3] https://lore.kernel.org/lkml/[email protected]/ Ionela Voinescu (3): arch_topology: validate input frequencies to arch_set_freq_scale() cpufreq: move invariance setter calls in cpufreq core cpufreq: report whether cpufreq supports Frequency Invariance (FI) Valentin Schneider (2): arch_topology, cpufreq: constify arch_* cpumasks arch_topology, arm, arm64: define arch_scale_freq_invariant() arch/arm/include/asm/topology.h | 1 + arch/arm64/include/asm/topology.h | 1 + arch/arm64/kernel/topology.c | 9 ++++++- drivers/base/arch_topology.c | 15 ++++++++++-- drivers/cpufreq/cpufreq-dt.c | 10 +------- drivers/cpufreq/cpufreq.c | 33 +++++++++++++++++++++++--- drivers/cpufreq/qcom-cpufreq-hw.c | 9 +------ drivers/cpufreq/scmi-cpufreq.c | 12 ++-------- drivers/cpufreq/scpi-cpufreq.c | 6 +---- drivers/cpufreq/vexpress-spc-cpufreq.c | 12 ++-------- include/linux/arch_topology.h | 4 +++- include/linux/cpufreq.h | 8 ++++++- 12 files changed, 70 insertions(+), 50 deletions(-) base-commit: 88abac0b753dfdd85362a26d2da8277cb1e0842b -- 2.17.1
