Re: [PATCH v2 08/19] arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC

[Vaittinen, Matti]

On Fri, 2020-08-28 at 18:47 +0200, Krzysztof Kozlowski wrote:
> The ROHM BD71847 PMIC has a 32.768 kHz clock.  Adding necessary
> parent
> allows to probe the bd718x7 clock driver fixing boot errors:
> 
>     bd718xx-clk bd71847-clk.1.auto: No parent clk found
>     bd718xx-clk: probe of bd71847-clk.1.auto failed with error -22
> 
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>

FWIW:
Acked-By: Matti Vaittinen <matti.vaitti...@fi.rohmeurope.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> index 3cb8b6bcb657..0115f07bbc9d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
> @@ -149,6 +149,10 @@
>               interrupts = <3 GPIO_ACTIVE_LOW>;
>               rohm,reset-snvs-powered;
>  
> +             #clock-cells = <0>;
> +             clocks = <&osc_32k 0>;
> +             clock-output-names = "clk-32k-out";
> +
>               regulators {
>                       buck1_reg: BUCK1 {
>                               regulator-name = "buck1";