On Mon, Aug 31, 2020 at 12:40:42PM +0800, JC Kuo wrote:
> This commit unlinks xhci-tegra platform device with ss/host power
> domain devices. Reasons for this change is - at elpg entry, phy
> sleepwalk and wake configuration need to be done before powering
> down ss/host partitions, and phy need be powered off after powering
> down ss/host partitions. Sequence looks like roughly below:
>
> tegra_xusb_enter_elpg() -> xhci_suspend()
> -> enable phy sleepwalk and wake if needed
> -> power down ss/host partitions
> -> power down phy
>
> If ss/host power domains are linked to xhci-tegra platform device, we
> are not able to perform the sequence like above.
>
> This commit introduces:
> 1. tegra_xusb_unpowergate_partitions() to power up ss and host
> partitions together. If ss/host power domain devices are
> available, it invokes pm_runtime_get_sync() to request power
> driver to power up partitions; If power domain devices are not
> available, tegra_powergate_sequence_power_up() will be used to
> power up partitions.
>
> 2. tegra_xusb_powergate_partitions() to power down ss and host
> partitions together. If ss/host power domain devices are
> available, it invokes pm_runtime_put_sync() to request power
> driver to power down partitions; If power domain devices are not
> available, tegra_powergate_power_off() will be used to power down
> partitions.
>
> Signed-off-by: JC Kuo <jc...@nvidia.com>
> ---
> drivers/usb/host/xhci-tegra.c | 202 +++++++++++++++++++---------------
> 1 file changed, 111 insertions(+), 91 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index 934be1686352..ce6526c2caf6 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -249,8 +249,6 @@ struct tegra_xusb {
>
> struct device *genpd_dev_host;
> struct device *genpd_dev_ss;
> - struct device_link *genpd_dl_host;
> - struct device_link *genpd_dl_ss;
>
> struct phy **phys;
> unsigned int num_phys;
> @@ -814,36 +812,12 @@ static void tegra_xusb_phy_disable(struct tegra_xusb
> *tegra)
>
> static int tegra_xusb_runtime_suspend(struct device *dev)
> {
> - struct tegra_xusb *tegra = dev_get_drvdata(dev);
> -
> - regulator_bulk_disable(tegra->soc->num_supplies, tegra->supplies);
> - tegra_xusb_clk_disable(tegra);
> -
> return 0;
> }
>
> static int tegra_xusb_runtime_resume(struct device *dev)
> {
> - struct tegra_xusb *tegra = dev_get_drvdata(dev);
> - int err;
> -
> - err = tegra_xusb_clk_enable(tegra);
> - if (err) {
> - dev_err(dev, "failed to enable clocks: %d\n", err);
> - return err;
> - }
> -
> - err = regulator_bulk_enable(tegra->soc->num_supplies, tegra->supplies);
> - if (err) {
> - dev_err(dev, "failed to enable regulators: %d\n", err);
> - goto disable_clk;
> - }
> -
> return 0;
> -
> -disable_clk:
> - tegra_xusb_clk_disable(tegra);
> - return err;
> }
>
> #ifdef CONFIG_PM_SLEEP
> @@ -1019,10 +993,6 @@ static int tegra_xusb_load_firmware(struct tegra_xusb
> *tegra)
> static void tegra_xusb_powerdomain_remove(struct device *dev,
> struct tegra_xusb *tegra)
> {
> - if (tegra->genpd_dl_ss)
> - device_link_del(tegra->genpd_dl_ss);
> - if (tegra->genpd_dl_host)
> - device_link_del(tegra->genpd_dl_host);
> if (!IS_ERR_OR_NULL(tegra->genpd_dev_ss))
> dev_pm_domain_detach(tegra->genpd_dev_ss, true);
> if (!IS_ERR_OR_NULL(tegra->genpd_dev_host))
> @@ -1048,20 +1018,88 @@ static int tegra_xusb_powerdomain_init(struct device
> *dev,
> return err;
> }
>
> - tegra->genpd_dl_host = device_link_add(dev, tegra->genpd_dev_host,
> - DL_FLAG_PM_RUNTIME |
> - DL_FLAG_STATELESS);
> - if (!tegra->genpd_dl_host) {
> - dev_err(dev, "adding host device link failed!\n");
> - return -ENODEV;
> + return 0;
> +}
> +
> +static int tegra_xusb_unpowergate_partitions(struct tegra_xusb *tegra)
> +{
> + struct device *dev = tegra->dev;
> + bool use_genpd;
> + int rc;
> +
> + use_genpd = of_property_read_bool(dev->of_node, "power-domains");
I don't think that's technically correct. Just because a "power-domains"
property exists in DT doesn't mean any power domains are necessarily
attached to the device. I think you'll need to check for something like
if (dev->pm_domain)
here.
Thierry
signature.asc
Description: PGP signature
