On 27/08/20 5:58 pm, Douglas Anderson wrote:
> As the comments in this patch say, if we tune and find all phases are
> valid it's _almost_ as bad as no phases being found valid.  Probably
> all phases are not really reliable but we didn't detect where the
> unreliable place is.  That means we'll essentially be guessing and
> hoping we get a good phase.
> 
> This is not just a problem in theory.  It was causing real problems on
> a real board.  On that board, most often phase 10 is found as the only
> invalid phase, though sometimes 10 and 11 are invalid and sometimes
> just 11.  Some percentage of the time, however, all phases are found
> to be valid.  When this happens, the current logic will decide to use
> phase 11.  Since phase 11 is sometimes found to be invalid, this is a
> bad choice.  Sure enough, when phase 11 is picked we often get mmc
> errors later in boot.
> 
> I have seen cases where all phases were found to be valid 3 times in a
> row, so increase the retry count to 10 just to be extra sure.
> 
> Fixes: 415b5a75da43 ("mmc: sdhci-msm: Add platform_execute_tuning 
> implementation")
> Signed-off-by: Douglas Anderson <diand...@chromium.org>

Acked-by: Adrian Hunter <adrian.hun...@intel.com>

> ---
> 
>  drivers/mmc/host/sdhci-msm.c | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index b7e47107a31a..1b78106681e0 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -1165,7 +1165,7 @@ static void sdhci_msm_set_cdr(struct sdhci_host *host, 
> bool enable)
>  static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
>  {
>       struct sdhci_host *host = mmc_priv(mmc);
> -     int tuning_seq_cnt = 3;
> +     int tuning_seq_cnt = 10;
>       u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
>       int rc;
>       struct mmc_ios ios = host->mmc->ios;
> @@ -1221,6 +1221,22 @@ static int sdhci_msm_execute_tuning(struct mmc_host 
> *mmc, u32 opcode)
>       } while (++phase < ARRAY_SIZE(tuned_phases));
>  
>       if (tuned_phase_cnt) {
> +             if (tuned_phase_cnt == ARRAY_SIZE(tuned_phases)) {
> +                     /*
> +                      * All phases valid is _almost_ as bad as no phases
> +                      * valid.  Probably all phases are not really reliable
> +                      * but we didn't detect where the unreliable place is.
> +                      * That means we'll essentially be guessing and hoping
> +                      * we get a good phase.  Better to try a few times.
> +                      */
> +                     dev_dbg(mmc_dev(mmc), "%s: All phases valid; try 
> again\n",
> +                             mmc_hostname(mmc));
> +                     if (--tuning_seq_cnt) {
> +                             tuned_phase_cnt = 0;
> +                             goto retry;
> +                     }
> +             }
> +
>               rc = msm_find_most_appropriate_phase(host, tuned_phases,
>                                                    tuned_phase_cnt);
>               if (rc < 0)
> 

Reply via email to