On Thu, 20 Aug 2020 at 16:12, Eddie James <eaja...@linux.ibm.com> wrote:
>
> Set I2C bus 7 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <eaja...@linux.ibm.com>
Same comments as for Tacoma.
Reviewed-by: Joel Stanley <j...@jms.id.au>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index b94421f6cbd5..f121f3c26a3a 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -698,6 +698,7 @@ eeprom@53 {
> };
>
> &i2c7 {
> + multi-master;
> status = "okay";
>
> si7021-a20@20 {
> @@ -831,6 +832,11 @@ gpio@15 {
> };
> };
>
> + ibm-panel@62 {
> + compatible = "ibm,op-panel";
> + reg = <0x40000062>; /* I2C_OWN_SLAVE_ADDRESS */
> + };
> +
> dps: dps310@76 {
> compatible = "infineon,dps310";
> reg = <0x76>;
> --
> 2.26.2
>
