On Tue, Sep 01, 2020 at 03:59:11PM -0700, Florian Fainelli wrote: > Describe the two possible clocks feeding into the Broadcom SF2 > integrated Ethernet switch. BCM7445 systems have two clocks, one for the > main switch core clock, and another for controlling the switch clock > divider whereas BCM7278 systems only have the first kind. > > Signed-off-by: Florian Fainelli <[email protected]> > --- > .../devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt > b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt > index 88b57b0ca1f4..97ca62b0e14d 100644 > --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt > +++ b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt > @@ -50,6 +50,13 @@ Optional properties: > - reset-names: If the "reset" property is specified, this property should > have > the value "switch" to denote the switch reset line. > > +- clocks: when provided, the first phandle is to the switch's main clock and > + is valid for both BCM7445 and BCM7278. The second phandle is only > applicable > + to BCM7445 and is to support dividing the switch core clock. > + > +- clock-names: when provided, the first phandle must be "sw_switch", and the > + second must be named "sw_switch_mdiv".
Hi Florian Since you look clocks up by name, i don't think the order matters. Otherwise: Reviewed-by: Andrew Lunn <[email protected]> Andrew
