On Mon, Aug 31, 2020 at 02:28:08PM +0530, Vinod Koul wrote:
> On 18-08-20, 00:34, Lubomir Rintel wrote:
> > Add PHY driver for the HSICs found on Marvell MMP3 SoC. The driver is
> > rather straightforward -- the PHY essentially just needs to be enabled.
> >
> > Signed-off-by: Lubomir Rintel <lkund...@v3.sk>
> >
> > ---
> > Changes since v1:
> > - Explicitely cast drvdata pointer to make sparse happy
> >
> > drivers/phy/marvell/Kconfig | 12 +++++
> > drivers/phy/marvell/Makefile | 1 +
> > drivers/phy/marvell/phy-mmp3-hsic.c | 82 +++++++++++++++++++++++++++++
> > 3 files changed, 95 insertions(+)
> > create mode 100644 drivers/phy/marvell/phy-mmp3-hsic.c
> >
> > diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
> > index 8f6273c837ec3..6c96f2bf52665 100644
> > --- a/drivers/phy/marvell/Kconfig
> > +++ b/drivers/phy/marvell/Kconfig
> > @@ -116,3 +116,15 @@ config PHY_MMP3_USB
> > The PHY driver will be used by Marvell udc/ehci/otg driver.
> >
> > To compile this driver as a module, choose M here.
> > +
> > +config PHY_MMP3_HSIC
> > + tristate "Marvell MMP3 USB HSIC PHY Driver"
> > + depends on MACH_MMP3_DT || COMPILE_TEST
> > + select GENERIC_PHY
> > + help
> > + Enable this to support Marvell MMP3 USB HSIC PHY driver for
> > + Marvell MMP3 SoC. This driver will be used my the Marvell EHCI
> > + driver to initialize the interface to internal USB HSIC
> > + components on MMP3-based boards.
> > +
> > + To compile this driver as a module, choose M here.
> > diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
> > index 5a106b1549f41..7f296ef028292 100644
> > --- a/drivers/phy/marvell/Makefile
> > +++ b/drivers/phy/marvell/Makefile
> > @@ -3,6 +3,7 @@ obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) +=
> > phy-armada375-usb2.o
> > obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
> > obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
> > obj-$(CONFIG_PHY_MMP3_USB) += phy-mmp3-usb.o
> > +obj-$(CONFIG_PHY_MMP3_HSIC) += phy-mmp3-hsic.o
> > obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
> > obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
> > obj-$(CONFIG_PHY_MVEBU_A38X_COMPHY) += phy-armada38x-comphy.o
> > diff --git a/drivers/phy/marvell/phy-mmp3-hsic.c
> > b/drivers/phy/marvell/phy-mmp3-hsic.c
> > new file mode 100644
> > index 0000000000000..47c1e8894939f
> > --- /dev/null
> > +++ b/drivers/phy/marvell/phy-mmp3-hsic.c
> > @@ -0,0 +1,82 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2020 Lubomir Rintel <lkund...@v3.sk>
> > + */
> > +
> > +#include <linux/delay.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +
> > +#define HSIC_CTRL 0x08
> > +#define HSIC_ENABLE BIT(7)
> > +#define PLL_BYPASS BIT(4)
> > +
> > +static int mmp3_hsic_phy_init(struct phy *phy)
> > +{
> > + void __iomem *base = (void __iomem *)phy_get_drvdata(phy);
>
> you are casting away from void * and casting to another void *,
> something doesn't look correct!
This is to make it explicit to sparse that the destination type is
supposed to have the __iomem annotation. Otherwise it complains:
drivers/phy/marvell/phy-mmp3-hsic.c:61:31: warning: cast removes address
space '__iomem' of expression
> > + u32 hsic_ctrl;
> > +
> > + hsic_ctrl = readl_relaxed(base + HSIC_CTRL);
> > + hsic_ctrl |= HSIC_ENABLE;
> > + hsic_ctrl |= PLL_BYPASS;
> > + writel_relaxed(hsic_ctrl, base + HSIC_CTRL);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops mmp3_hsic_phy_ops = {
> > + .init = mmp3_hsic_phy_init,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static const struct of_device_id mmp3_hsic_phy_of_match[] = {
> > + { .compatible = "marvell,mmp3-hsic-phy", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, mmp3_hsic_phy_of_match);
> > +
> > +static int mmp3_hsic_phy_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct phy_provider *provider;
> > + struct resource *resource;
> > + void __iomem *base;
> > + struct phy *phy;
> > +
> > + resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + base = devm_ioremap_resource(dev, resource);
> > + if (IS_ERR(base)) {
> > + dev_err(dev, "failed to remap PHY regs\n");
> > + return PTR_ERR(base);
> > + }
> > +
> > + phy = devm_phy_create(dev, NULL, &mmp3_hsic_phy_ops);
> > + if (IS_ERR(phy)) {
> > + dev_err(dev, "failed to create PHY\n");
> > + return PTR_ERR(phy);
> > + }
> > +
> > + phy_set_drvdata(phy, (void *)base);
>
> again skip the cast
>
> > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > + if (IS_ERR(provider)) {
> > + dev_err(dev, "failed to register PHY provider\n");
> > + return PTR_ERR(provider);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static struct platform_driver mmp3_hsic_phy_driver = {
> > + .probe = mmp3_hsic_phy_probe,
> > + .driver = {
> > + .name = "mmp3-hsic-phy",
> > + .of_match_table = mmp3_hsic_phy_of_match,
> > + },
> > +};
> > +module_platform_driver(mmp3_hsic_phy_driver);
> > +
> > +MODULE_AUTHOR("Lubomir Rintel <lkund...@v3.sk>");
> > +MODULE_DESCRIPTION("Marvell MMP3 USB HSIC PHY Driver");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.26.2
>
> --
> ~Vinod
