Works for me on the Galaxy S.

Tested-by: Jonathan Bakker <xc-rac...@live.ca>

Thanks,
Jonathan

On 2020-09-07 9:11 a.m., Krzysztof Kozlowski wrote:
> The fixed clocks are kept under dedicated 'external-clocks' node, thus a
> fake 'reg' was added.  This is not correct with dtschema as fixed-clock
> binding does not have a 'reg' property.  Moving fixed clocks out of
> 'soc' to root node fixes multiple dtbs_check warnings:
> 
>   external-clocks: $nodename:0: 'external-clocks' does not match 
> '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
>   external-clocks: #size-cells:0:0: 0 is not one of [1, 2]
>   external-clocks: oscillator@0:reg:0: [0] is too short
>   external-clocks: oscillator@1:reg:0: [1] is too short
>   external-clocks: 'ranges' is a required property
>   oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
> ---
>  arch/arm/boot/dts/s5pv210.dtsi | 36 +++++++++++++---------------------
>  1 file changed, 14 insertions(+), 22 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
> index 84e4447931de..5c760a6d7955 100644
> --- a/arch/arm/boot/dts/s5pv210.dtsi
> +++ b/arch/arm/boot/dts/s5pv210.dtsi
> @@ -52,34 +52,26 @@
>               };
>       };
>  
> +     xxti: oscillator-0 {
> +             compatible = "fixed-clock";
> +             clock-frequency = <0>;
> +             clock-output-names = "xxti";
> +             #clock-cells = <0>;
> +     };
> +
> +     xusbxti: oscillator-1 {
> +             compatible = "fixed-clock";
> +             clock-frequency = <0>;
> +             clock-output-names = "xusbxti";
> +             #clock-cells = <0>;
> +     };
> +
>       soc {
>               compatible = "simple-bus";
>               #address-cells = <1>;
>               #size-cells = <1>;
>               ranges;
>  
> -             external-clocks {
> -                     compatible = "simple-bus";
> -                     #address-cells = <1>;
> -                     #size-cells = <0>;
> -
> -                     xxti: oscillator@0 {
> -                             compatible = "fixed-clock";
> -                             reg = <0>;
> -                             clock-frequency = <0>;
> -                             clock-output-names = "xxti";
> -                             #clock-cells = <0>;
> -                     };
> -
> -                     xusbxti: oscillator@1 {
> -                             compatible = "fixed-clock";
> -                             reg = <1>;
> -                             clock-frequency = <0>;
> -                             clock-output-names = "xusbxti";
> -                             #clock-cells = <0>;
> -                     };
> -             };
> -
>               onenand: onenand@b0600000 {
>                       compatible = "samsung,s5pv210-onenand";
>                       reg = <0xb0600000 0x2000>,
> 

Reply via email to