On Wed, Sep 09, 2020 at 07:07:34AM +0800, Amireddy Mallikarjuna reddy wrote:
> Add DMA controller driver for Lightning Mountain(LGM) family of SoCs.
>
> The main function of the DMA controller is the transfer of data from/to any
> DPlus compliant peripheral to/from the memory. A memory to memory copy
> capability can also be configured.
>
> This ldma driver is used for configure the device and channnels for data
> and control paths.
...
> +config INTEL_LDMA
> + bool "Lightning Mountain centralized low speed DMA and high speed DMA
> controllers"
> + select DMA_ENGINE
> + select DMA_VIRTUAL_CHANNELS
> + help
> + Enable support for intel Lightning Mountain SOC DMA controllers.
> + These controllers provide DMA capabilities for a variety of on-chip
> + devices such as SSC, HSNAND and GSWIP.
And how module will be called?
...
> +struct ldma_dev;
> +struct ldma_port;
+ blank line
> +struct ldma_chan {
> + struct ldma_port *port; /* back pointer */
> + char name[8]; /* Channel name */
> + struct virt_dma_chan vchan;
You can make container_of() no-op if you put this to be first member of the
structure.
> + int nr; /* Channel id in hardware */
> + u32 flags; /* central way or channel based way */
> + enum ldma_chan_on_off onoff;
> + dma_addr_t desc_phys;
> + void *desc_base; /* Virtual address */
> + u32 desc_cnt; /* Number of descriptors */
> + int rst;
> + u32 hdrm_len;
> + bool hdrm_csum;
> + u32 boff_len;
> + u32 data_endian;
> + u32 desc_endian;
> + bool pden;
> + bool desc_rx_np;
> + bool data_endian_en;
> + bool desc_endian_en;
> + bool abc_en;
> + bool desc_init;
> + struct dma_pool *desc_pool; /* Descriptors pool */
> + u32 desc_num;
> + struct dw2_desc_sw *ds;
> + struct work_struct work;
> + struct dma_slave_config config;
> +};
...
> + struct {
> + u32 len :16;
> + u32 res0 :7;
> + u32 bofs :2;
> + u32 res1 :3;
> + u32 eop :1;
> + u32 sop :1;
> + u32 c :1;
> + u32 own :1;
> + } __packed field;
> + u32 word;
Can you rather use bitfield.h?
> + } __packed status;
> + u32 addr;
> +} __packed __aligned(8);
...
> +struct dw2_desc_sw {
> + struct ldma_chan *chan;
> + struct virt_dma_desc vdesc;
Make it first and container_of() becomes no-op.
> + dma_addr_t desc_phys;
> + size_t desc_cnt;
> + size_t size;
> + struct dw2_desc *desc_hw;
> +};
...
> +ldma_update_bits(struct ldma_dev *d, u32 mask, u32 val, u32 ofs)
> +{
> + u32 old_val, new_val;
> +
> + old_val = readl(d->base + ofs);
> + new_val = (old_val & ~mask) | (val & mask);
With bitfield.h you will have this as u32_replace_bits().
> +
> + if (new_val != old_val)
> + writel(new_val, d->base + ofs);
> +}
...
> + /* Keep the class value unchanged */
> + reg &= DMA_CCTRL_CLASS | DMA_CCTRL_CLASSH;
> + reg |= val;
No mask? Consider u32_replace_bits() or other FIELD_*() macros.
...
> +static void ldma_chan_desc_hw_cfg(struct ldma_chan *c, dma_addr_t desc_base,
> + int desc_num)
> +{
> + struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&d->dev_lock, flags);
> + ldma_update_bits(d, DMA_CS_MASK, c->nr, DMA_CS);
> + writel(lower_32_bits(desc_base), d->base + DMA_CDBA);
> + /* High 4 bits */
Why only 4?
> + if (IS_ENABLED(CONFIG_64BIT)) {
> + u32 hi = upper_32_bits(desc_base) & 0xF;
GENMASK() ?
> +
> + ldma_update_bits(d, DMA_CDBA_MSB,
> + FIELD_PREP(DMA_CDBA_MSB, hi), DMA_CCTRL);
> + }
> + writel(desc_num, d->base + DMA_CDLEN);
> + spin_unlock_irqrestore(&d->dev_lock, flags);
> +
> + c->desc_init = true;
> +}
...
> + dev_dbg(d->dev, "Port Control 0x%08x configuration done\n",
> + readl(d->base + DMA_PCTRL));
This has a side effect. Better to use temporary variable if you need to read
back.
...
> +static int ldma_chan_cfg(struct ldma_chan *c)
> +{
> + struct ldma_dev *d = to_ldma_dev(c->vchan.chan.device);
> + unsigned long flags;
> + u32 reg;
> +
> + reg = c->pden ? DMA_CCTRL_PDEN : 0;
> + reg |= c->onoff ? DMA_CCTRL_ON : 0;
> + reg |= c->rst ? DMA_CCTRL_RST : 0;
> +
> + ldma_chan_cctrl_cfg(c, reg);
> + ldma_chan_irq_init(c);
> + if (d->ver > DMA_VER22) {
if (d->ver <= DMA_VER22)
return 0;
?
> + spin_lock_irqsave(&d->dev_lock, flags);
> + ldma_chan_set_class(c, c->nr);
> + ldma_chan_byte_offset_cfg(c, c->boff_len);
> + ldma_chan_data_endian_cfg(c, c->data_endian_en, c->data_endian);
> + ldma_chan_desc_endian_cfg(c, c->desc_endian_en, c->desc_endian);
> + ldma_chan_hdr_mode_cfg(c, c->hdrm_len, c->hdrm_csum);
> + ldma_chan_rxwr_np_cfg(c, c->desc_rx_np);
> + ldma_chan_abc_cfg(c, c->abc_en);
> + spin_unlock_irqrestore(&d->dev_lock, flags);
> +
> + if (ldma_chan_is_hw_desc(c))
> + ldma_chan_desc_hw_cfg(c, c->desc_phys, c->desc_cnt);
> + }
> +
> + return 0;
> +}
...
> + /* DMA channel initialization */
> + for (i = 0; i < d->chan_nrs; i++) {
> + if (d->ver == DMA_VER22 && !(d->channels_mask & BIT(i)))
> + continue;
for_each_set_bit() ?
> + c = &d->chans[i];
> + ldma_chan_cfg(c);
> + }
...
> + for (i = 0; i < d->port_nrs; i++) {
> + p = &d->ports[i];
> + p->rxendi = DMA_DFT_ENDIAN;
> + p->txendi = DMA_DFT_ENDIAN;
> + if (!fwnode_property_read_u32(fwnode, "intel,dma-burst",
> + &prop)) {
How this is not invariant inside the loop?
> + p->rxbl = prop;
> + p->txbl = prop;
> + } else {
> + p->rxbl = DMA_DFT_BURST;
> + p->txbl = DMA_DFT_BURST;
> + }
> +
> + p->pkt_drop = DMA_PKT_DROP_DIS;
> + }
...
> + if (d->ver == DMA_VER22) {
> + spin_lock_irqsave(&c->vchan.lock, flags);
> + if (vchan_issue_pending(&c->vchan)) {
> + struct virt_dma_desc *vdesc;
> +
> + /* Get the next descriptor */
> + vdesc = vchan_next_desc(&c->vchan);
> + if (!vdesc) {
> + c->ds = NULL;
Nice! Don't you forget something to do here?
> + return;
> + }
> + list_del(&vdesc->node);
> + c->ds = to_lgm_dma_desc(vdesc);
> + ldma_chan_desc_hw_cfg(c, c->ds->desc_phys,
> c->ds->desc_cnt);
> + ldma_chan_irq_en(c);
> + }
> + spin_unlock_irqrestore(&c->vchan.lock, flags);
> + }
...
> + irncr = readl(d->base + DMA_IRNCR);
> + if (!irncr) {
> + dev_err(d->dev, "dummy interrupt\n");
I could imagine what happens in case of shared IRQ...
> + return IRQ_NONE;
> + }
...
> + /* Default setting will be used */
> + if (cfg->src_maxburst != 2 && cfg->src_maxburst != 4 &&
> + cfg->src_maxburst != 8)
This is strange. Caller should have a possibility to set anything based on the
channel and device capabilities. This one is hidden problem for the caller. Are
you going to customize each peripheral driver for your DMA engine
implementation?
> + return;
...
> + if (!sgl)
> + return NULL;
Is it possible?
...
> +static int
> +dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
> +{
> + struct ldma_chan *c = to_ldma_chan(chan);
> +
> + if ((cfg->direction == DMA_DEV_TO_MEM &&
> + cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
> + (cfg->direction == DMA_MEM_TO_DEV &&
> + cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) ||
Why?
> + !is_slave_direction(cfg->direction))
> + return -EINVAL;
> +
> + /* Must be the same */
Why?
> + if (cfg->src_maxburst && cfg->dst_maxburst &&
> + cfg->src_maxburst != cfg->dst_maxburst)
> + return -EINVAL;
> + if (cfg->src_maxburst != 2 && cfg->src_maxburst != 4 &&
> + cfg->src_maxburst != 8)
Why?
> + return -EINVAL;
> +
> + memcpy(&c->config, cfg, sizeof(c->config));
> +
> + return 0;
> +}
...
> +static void dma_work(struct work_struct *work)
> +{
> + struct ldma_chan *c = container_of(work, struct ldma_chan, work);
> + struct dma_async_tx_descriptor *tx = &c->ds->vdesc.tx;
> + struct virt_dma_chan *vc = &c->vchan;
> + struct dmaengine_desc_callback cb;
> + struct virt_dma_desc *vd, *_vd;
> + LIST_HEAD(head);
> +
> + list_splice_tail_init(&vc->desc_completed, &head);
No protection?
> + dmaengine_desc_get_callback(tx, &cb);
> + dma_cookie_complete(tx);
> + dmaengine_desc_callback_invoke(&cb, NULL);
> +
> + list_for_each_entry_safe(vd, _vd, &head, node) {
> + dmaengine_desc_get_callback(tx, &cb);
> + dma_cookie_complete(tx);
> + list_del(&vd->node);
> + dmaengine_desc_callback_invoke(&cb, NULL);
> +
> + vchan_vdesc_fini(vd);
> + }
> + c->ds = NULL;
> +}
...
> +static int
> +update_client_configs(struct of_dma *ofdma, struct of_phandle_args *spec)
> +{
> + struct ldma_dev *d = ofdma->of_dma_data;
> + struct ldma_port *p;
> + struct ldma_chan *c;
> + u32 chan_id = spec->args[0];
> + u32 port_id = spec->args[1];
> +
> + if (chan_id >= d->chan_nrs || port_id >= d->port_nrs)
> + return 0;
> +
> + p = &d->ports[port_id];
> + c = &d->chans[chan_id];
> + c->port = p;
> +
> + if (d->ver == DMA_VER22) {
> + u32 desc_num;
> + u32 burst = spec->args[2];
> +
> + if (burst != 2 && burst != 4 && burst != 8)
> + return 0;
> +
> + /* TX and RX has the same burst length */
> + p->txbl = ilog2(burst);
> + p->rxbl = p->txbl;
> +
> + desc_num = spec->args[3];
> + if (desc_num > 255)
> + return 0;
> + c->desc_num = desc_num;
> +
> + ldma_port_cfg(p);
> + ldma_chan_cfg(c);
> + } else {
> + if (spec->args[2] > 0 && spec->args[2] <= DMA_ENDIAN_TYPE3) {
> + c->data_endian = spec->args[2];
> + c->data_endian_en = true;
> + }
> +
> + if (spec->args[3] > 0 && spec->args[3] <= DMA_ENDIAN_TYPE3) {
> + c->desc_endian = spec->args[3];
> + c->desc_endian_en = true;
> + }
> +
> + if (spec->args[4] > 0 && spec->args[4] < 128)
> + c->boff_len = spec->args[4];
> +
> + if (spec->args[5])
> + c->desc_rx_np = true;
> +
> + /*
> + * If channel packet drop enabled, port packet drop should
> + * be enabled
> + */
> + if (spec->args[6]) {
> + c->pden = true;
> + p->pkt_drop = DMA_PKT_DROP_EN;
> + }
> +
> + /*
> + * hdr-mode: If enabled, header mode size is ignored
> + * If disabled, header mode size must be provided
> + */
> + c->hdrm_csum = !!spec->args[8];
> + if (!c->hdrm_csum) {
> + if (!spec->args[7] || spec->args[7] > DMA_HDR_LEN_MAX)
> + return 0;
> + c->hdrm_len = spec->args[7];
> + }
> +
> + if (spec->args[10]) {
> + c->desc_cnt = spec->args[10];
> + if (c->desc_cnt > DMA_MAX_DESC_NUM) {
> + dev_err(d->dev, "Channel %d descriptor number
> out of range %d\n",
> + c->nr, c->desc_cnt);
> + return 0;
> + }
> + c->desc_phys = spec->args[9];
> + c->flags |= DMA_HW_DESC;
> + }
> +
> + ldma_port_cfg(p);
> + ldma_chan_cfg(c);
> + }
> +
> + return 1;
> +}
> +
Can you split all these kind of functions each to three:
foo_vXXX()
foo_v22()
foo()
{
if (ver = 22)
return foo_v22()
return foo_vXXX()
}
?
...
> + d->rst = devm_reset_control_get_optional(dev, NULL);
> + if (IS_ERR(d->rst))
> + return PTR_ERR(d->rst);
> + reset_control_deassert(d->rst);
Shouldn't be devm_add_action_or_reset() for assert reset?
...
> + if (IS_ENABLED(CONFIG_64BIT)) {
> + if (id & DMA_ID_AW_36B)
> + bitn = 36;
> + }
if (a) { if (b) { ... }} ==> if (a && b) { ...}
...
> + if (d->ver == DMA_VER22) {
Split?
> + ret = of_property_read_u32(pdev->dev.of_node, "dma-channels",
> + &d->chan_nrs);
> + if (ret < 0) {
> + dev_err(dev, "unable to read dma-channels property\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(pdev->dev.of_node,
> "dma-channel-mask",
> + &d->channels_mask);
> + if (ret < 0)
> + d->channels_mask = GENMASK(d->chan_nrs - 1, 0);
of_property*() are leftovers? Shouldn't be device_property_*()?
> +
> + d->irq = platform_get_irq(pdev, 0);
> + if (d->irq < 0)
> + return d->irq;
> +
> + ret = devm_request_irq(&pdev->dev, d->irq, dma_interrupt,
> + 0, DRIVER_NAME, d);
> + if (ret)
> + return ret;
> +
> + d->wq = alloc_ordered_workqueue("dma_wq", WQ_MEM_RECLAIM |
> + WQ_HIGHPRI);
> + if (!d->wq)
> + return -ENOMEM;
> + }
...
> + for (i = 0; i < d->port_nrs; i++) {
> + p = &d->ports[i];
> + p->portid = i;
> + p->ldev = d;
> + for (j = 0; j < d->chan_nrs && d->ver != DMA_VER22; j++)
> + c = &d->chans[j];
What's going on here?
> + }
...
> + for (i = 0; i < d->chan_nrs; i++) {
> + if (d->ver == DMA_VER22) {
Split...
> + if (!(d->channels_mask & BIT(i)))
> + continue;
...and obviously for_each_set_bit().
> + c = &d->chans[i];
> + c->nr = i; /* Real channel number */
> + c->rst = DMA_CHAN_RST;
> + snprintf(c->name, sizeof(c->name), "chan%d",
> + c->nr);
> + INIT_WORK(&c->work, dma_work);
> + c->vchan.desc_free = dma_free_desc_resource;
> + vchan_init(&c->vchan, dma_dev);
> + } else {
> + c = &d->chans[i];
> + c->data_endian = DMA_DFT_ENDIAN;
> + c->desc_endian = DMA_DFT_ENDIAN;
> + c->data_endian_en = false;
> + c->desc_endian_en = false;
> + c->desc_rx_np = false;
> + c->flags |= DEVICE_ALLOC_DESC;
> + c->onoff = DMA_CH_OFF;
> + c->rst = DMA_CHAN_RST;
> + c->abc_en = true;
> + c->nr = i;
> + c->vchan.desc_free = dma_free_desc_resource;
> + vchan_init(&c->vchan, dma_dev);
> + }
> + }
...
> +static int __init intel_ldma_init(void)
> +{
> + return platform_driver_register(&intel_ldma_driver);
> +}
> +
> +device_initcall(intel_ldma_init);
Each _initcall() in general should be explained.
...
> +#include <linux/dmaengine.h>
I don't see how it's used
struct dma_chan;
should be enough.
> +/*!
> + * \fn int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t
> desc_base,
> + * int desc_num)
> + * \brief Configure low level channel descriptors
> + * \param[in] chan pointer to DMA channel that the client is using
> + * \param[in] desc_base descriptor base physical address
> + * \param[in] desc_num number of descriptors
> + * \return 0 on success
> + * \return kernel bug reported on failure
> + *
> + * This function configure the low level channel descriptors. It will be
> + * used by CBM whose descriptor is not DDR, actually some registers.
> + */
> +int intel_dma_chan_desc_cfg(struct dma_chan *chan, dma_addr_t desc_base,
> + int desc_num);
--
With Best Regards,
Andy Shevchenko
