The register addresses are not continuous, so use simple defines for them. This also makes it easier to find the address for register.
No functional change. Signed-off-by: Krzysztof Kozlowski <[email protected]> --- drivers/extcon/extcon-ptn5150.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c index dda5b3a3a908..1b68f56d8372 100644 --- a/drivers/extcon/extcon-ptn5150.c +++ b/drivers/extcon/extcon-ptn5150.c @@ -19,18 +19,16 @@ #include <linux/gpio/consumer.h> /* PTN5150 registers */ -enum ptn5150_reg { - PTN5150_REG_DEVICE_ID = 0x01, - PTN5150_REG_CONTROL, - PTN5150_REG_INT_STATUS, - PTN5150_REG_CC_STATUS, - PTN5150_REG_CON_DET = 0x09, - PTN5150_REG_VCONN_STATUS, - PTN5150_REG_RESET, - PTN5150_REG_INT_MASK = 0x18, - PTN5150_REG_INT_REG_STATUS, - PTN5150_REG_END, -}; +#define PTN5150_REG_DEVICE_ID 0x01 +#define PTN5150_REG_CONTROL 0x02 +#define PTN5150_REG_INT_STATUS 0x03 +#define PTN5150_REG_CC_STATUS 0x04 +#define PTN5150_REG_CON_DET 0x09 +#define PTN5150_REG_VCONN_STATUS 0x0a +#define PTN5150_REG_RESET 0x0b +#define PTN5150_REG_INT_MASK 0x18 +#define PTN5150_REG_INT_REG_STATUS 0x19 +#define PTN5150_REG_END PTN5150_REG_INT_REG_STATUS #define PTN5150_DFP_ATTACHED 0x1 #define PTN5150_UFP_ATTACHED 0x2 -- 2.17.1
