Set I2C bus 0 to multi-master mode and add the panel device that will
register as a slave.
Signed-off-by: Eddie James <eaja...@linux.ibm.com>
Reviewed-by: Joel Stanley <j...@jms.id.au>
---
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 5f4ee67ac787..4d070d6ba09f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -4,6 +4,7 @@
#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>
/ {
@@ -438,7 +439,13 @@ aliases {
};
&i2c0 {
+ multi-master;
status = "okay";
+
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
};
&i2c1 {
--
2.26.2
