Hi!
> > > +{
> > > + struct mt6360_led *led = container_of(lcdev, struct mt6360_led,
> > > flash.led_cdev);
> > > + struct mt6360_priv *priv = led->priv;
> > > + u32 enable_mask = MT6360_TORCHEN_MASK |
> > > MT6360_FLCSEN_MASK(led->led_no);
> > > + u32 val = (level) ? MT6360_FLCSEN_MASK(led->led_no) : 0;
> > > + u32 prev = priv->fled_torch_used, curr;
> > > + int ret;
> > > +
> > > + dev_dbg(lcdev->dev, "[%d] brightness %d\n", led->led_no, level);
> > > + if (priv->fled_strobe_used) {
> > > + dev_warn(lcdev->dev, "Please disable strobe first [%d]\n",
> > > priv->fled_strobe_used);
> > > + return -EINVAL;
> > > + }
> >
> > So... how does its userland interface look like?
> >
>
> 1. set FLED1 brightness
> # echo 1 > /sys/class/leds/white:flash1/flash_brightness
> 2. enable FLED1 strobe
> # echo 1 > /sys/class/leds/white:flash1/flash_strobe
> 3 . turn off FLED1 strobe (just used to gaurantee the strobe mode
> flash leds must be turned off)
> # echo 0 > /sys/class/leds/white:flash1/flash_strobe
I believe I'd preffer only exposing torch functionality in
/sys/class/leds. .. strobe can be supported using v4l2 APIs.
Best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: PGP signature
