The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx requires GPIO hogs to end with 'hog' prefix.

Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
 .../boot/dts/mediatek/pumpkin-common.dtsi     | 26 +++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi 
b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 29d8cf6df46b..351a1905a074 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -63,91 +63,91 @@
                gpio-controller;
                #gpio-cells = <2>;
 
-               eint20_mux_sel0 {
+               eint20-mux-sel0-hog {
                        gpio-hog;
                        gpios = <0 0>;
                        input;
                        line-name = "eint20_mux_sel0";
                };
 
-               expcon_mux_sel1 {
+               expcon-mux-sel1-hog {
                        gpio-hog;
                        gpios = <1 0>;
                        input;
                        line-name = "expcon_mux_sel1";
                };
 
-               mrg_di_mux_sel2 {
+               mrg-di-mux-sel2-hog {
                        gpio-hog;
                        gpios = <2 0>;
                        input;
                        line-name = "mrg_di_mux_sel2";
                };
 
-               sd_sdio_mux_sel3 {
+               sd-sdio-mux-sel3-hog {
                        gpio-hog;
                        gpios = <3 0>;
                        input;
                        line-name = "sd_sdio_mux_sel3";
                };
 
-               sd_sdio_mux_ctrl7 {
+               sd-sdio-mux-ctrl7-hog {
                        gpio-hog;
                        gpios = <7 0>;
                        output-low;
                        line-name = "sd_sdio_mux_ctrl7";
                };
 
-               hw_id0 {
+               hw-id0-hog {
                        gpio-hog;
                        gpios = <8 0>;
                        input;
                        line-name = "hw_id0";
                };
 
-               hw_id1 {
+               hw-id1-hog {
                        gpio-hog;
                        gpios = <9 0>;
                        input;
                        line-name = "hw_id1";
                };
 
-               hw_id2 {
+               hw-id2-hog {
                        gpio-hog;
                        gpios = <10 0>;
                        input;
                        line-name = "hw_id2";
                };
 
-               fg_int_n {
+               fg-int-n-hog {
                        gpio-hog;
                        gpios = <11 0>;
                        input;
                        line-name = "fg_int_n";
                };
 
-               usba_pwr_en {
+               usba-pwr-en-hog {
                        gpio-hog;
                        gpios = <12 0>;
                        output-high;
                        line-name = "usba_pwr_en";
                };
 
-               wifi_3v3_pg {
+               wifi-3v3-pg-hog {
                        gpio-hog;
                        gpios = <13 0>;
                        input;
                        line-name = "wifi_3v3_pg";
                };
 
-               cam_rst {
+               cam-rst-hog {
                        gpio-hog;
                        gpios = <14 0>;
                        output-low;
                        line-name = "cam_rst";
                };
 
-               cam_pwdn {
+               cam-pwdn-hog {
                        gpio-hog;
                        gpios = <15 0>;
                        output-low;
-- 
2.17.1

Reply via email to