> From: Shawn Guo <shawn...@kernel.org> > Sent: Wednesday, August 19, 2020 9:23 PM > > On Tue, Aug 18, 2020 at 09:52:02AM +0200, Franck LENORMAND (OSS) wrote: > > Hello, > > > > Peng was able to do a firt pass of review on my patchset which led to > > this second version. I hope a maintainer will be able to take a look > > at this patchset once rested after all the work they did for 5.9. > > @Peng, are you okay with this version? > > @Aisheng, have a review on this?
Sorry, just noticed this. Will find a time to review these two days. Regards Aisheng > > Shawn > > > > > On mar., 2020-07-21 at 17:20 +0200, franck.lenorm...@oss.nxp.com wrote: > > > From: Franck LENORMAND <franck.lenorm...@oss.nxp.com> > > > > > > This patchset aims to add support for the SECurity VIOlation > > > (SECVIO) of the SNVS. A secvio is a signal emitted by the SNVS when > > > a hardware attack is detected. On imx8x and imx8q SoC, the SNVS is > > > controlled by the SECO and it is possible to interact with it using the > > > SCU > using the SC APIs. > > > > > > For the driver to communicate with the SNVS via the SCU and the SECO, I > had to: > > > - Add support for exchange of big message with the SCU (needed for > > > imx_scu_irq_get_status) > > > - Add API to check linux can control the SECVIO > > > (imx_sc_rm_is_resource_owned) > > > - Add APIs for the driver to read the state of the SECVIO registers > > > of the SNVS and DGO (imx_sc_seco_secvio_enable and > imx_sc_seco_secvio_enable). > > > > > > To check the state of the SECVIO IRQ in the SCU, I added the > > > imx_scu_irq_get_status API. > > > > > > The secvio driver is designed to receive the IRQ produced by the > > > SNVS in case of hardware attack and notify the status to the audit > > > framework which can be used by the user. > > > > > > The goal of the driver is to be self suficient but can be extended > > > by the user to perform custom operations on values read > > > (imx_sc_seco_secvio_enable) > > > > > > v2: > > > - Removed (firmware: imx: scu-rm: Add Resource Management APIs) > > > -> Code required is already present > > > - Removed (firmware: imx: scu: Support reception of messages of any size) > > > -> The imx-scu is already working in fast-ipc mode > > > - (soc: imx8: Add the SC SECVIO driver): > > > - Fixed the warnings reported by kernel test robot > > > > > > Franck LENORMAND (5): > > > firmware: imx: scu-seco: Add SEcure Controller APIS > > > firmware: imx: scu-irq: Add API to retrieve status of IRQ > > > dt-bindings: firmware: imx-scu: Add SECVIO resource > > > dt-bindings: arm: imx: Documentation of the SC secvio driver > > > soc: imx8: Add the SC SECVIO driver > > > > > > .../bindings/arm/freescale/fsl,imx-sc-secvio.yaml | 34 + > > > drivers/firmware/imx/Makefile | 2 +- > > > drivers/firmware/imx/imx-scu-irq.c | 37 +- > > > drivers/firmware/imx/imx-scu.c | 3 + > > > drivers/firmware/imx/seco.c | 275 > +++++++ > > > drivers/soc/imx/Kconfig | 10 + > > > drivers/soc/imx/Makefile | 1 + > > > drivers/soc/imx/secvio/Kconfig | 10 + > > > drivers/soc/imx/secvio/Makefile | 3 + > > > drivers/soc/imx/secvio/imx-secvio-audit.c | 39 + > > > drivers/soc/imx/secvio/imx-secvio-debugfs.c | 379 +++++++++ > > > drivers/soc/imx/secvio/imx-secvio-sc-int.h | 84 ++ > > > drivers/soc/imx/secvio/imx-secvio-sc.c | 858 > > > +++++++++++++++++++++ > > > include/dt-bindings/firmware/imx/rsrc.h | 3 +- > > > include/linux/firmware/imx/ipc.h | 1 + > > > include/linux/firmware/imx/sci.h | 5 + > > > include/linux/firmware/imx/svc/seco.h | 73 ++ > > > include/soc/imx/imx-secvio-sc.h | 177 +++++ > > > 18 files changed, 1991 insertions(+), 3 deletions(-) > > > create mode 100644 > > > Documentation/devicetree/bindings/arm/freescale/fsl,imx-sc- > > > secvio.yaml > > > create mode 100644 drivers/firmware/imx/seco.c > > > create mode 100644 drivers/soc/imx/secvio/Kconfig > > > create mode 100644 drivers/soc/imx/secvio/Makefile > > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-audit.c > > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-debugfs.c > > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc-int.h > > > create mode 100644 drivers/soc/imx/secvio/imx-secvio-sc.c > > > create mode 100644 include/linux/firmware/imx/svc/seco.h > > > create mode 100644 include/soc/imx/imx-secvio-sc.h > > > > >