On Mon, Sep 07, 2020 at 01:38:01PM +0800, Zhiqiang Hou wrote:
> From: Hou Zhiqiang <zhiqiang....@nxp.com>
> 
> Add PME_Turn_Off/PME_TO_Ack handshake sequence, and finally
> put the PCIe controller into D3 state after the L2/L3 ready
> state transition process completion.
> 
> Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com>
> ---
>  drivers/pci/controller/dwc/pci-layerscape.c  | 384 ++++++++++++++++++-
>  drivers/pci/controller/dwc/pcie-designware.h |   1 +
>  2 files changed, 383 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c 
> b/drivers/pci/controller/dwc/pci-layerscape.c
> index be404c16bcbe..ca9ea07f77c1 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -3,13 +3,16 @@
>   * PCIe host controller driver for Freescale Layerscape SoCs
>   *
>   * Copyright (C) 2014 Freescale Semiconductor.
> + * Copyright 2020 NXP
>   *
>   * Author: Minghuan Lian <minghuan.l...@freescale.com>
>   */
>  
> +#include <linux/delay.h>
>  #include <linux/kernel.h>
>  #include <linux/interrupt.h>
>  #include <linux/init.h>
> +#include <linux/iopoll.h>
>  #include <linux/of_pci.h>
>  #include <linux/of_platform.h>
>  #include <linux/of_irq.h>
> @@ -27,17 +30,66 @@
>  #define PCIE_ABSERR          0x8d0 /* Bridge Slave Error Response Register */
>  #define PCIE_ABSERR_SETTING  0x9401 /* Forward error of non-posted request */
>  
> +#define PCIE_PM_SCR          0x44
> +#define PCIE_PM_SCR_PMEPS_D0 0x0
> +#define PCIE_PM_SCR_PMEPS_D3 0x3
> +
> +#define PCIE_LNKCTL          0x80  /* PCIe link ctrl Register */

Use the common defines.


> +
> +/* PF Message Command Register */
> +#define LS_PCIE_PF_MCR               0x2c
> +#define PF_MCR_PTOMR         BIT(0)
> +#define PF_MCR_EXL2S         BIT(1)
> +
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)  (0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF         BIT(31)
> +#define SCFG_PEXSFTRSTCR     0x190
> +#define PEXSR(idx)           BIT(idx)
> +
> +/* LS1043A PEX PME control register */
> +#define SCFG_PEXPMECR                0x144
> +#define PEXPME(idx)          BIT(31 - (idx) * 4)
> +
> +/* LS1043A PEX LUT debug register */
> +#define LS_PCIE_LDBG 0x7fc
> +#define LDBG_SR              BIT(30)
> +#define LDBG_WE              BIT(31)
> +
>  #define PCIE_IATU_NUM                6
>  
> +#define LS_PCIE_IS_L2(v)     \
> +     (((v) & PORT_LOGIC_LTSSM_STATE_MASK) == PORT_LOGIC_LTSSM_STATE_L2)
> +
> +struct ls_pcie;
> +
> +struct ls_pcie_host_pm_ops {
> +     int (*pm_init)(struct ls_pcie *pcie);
> +     void (*send_turn_off_message)(struct ls_pcie *pcie);
> +     void (*exit_from_l2)(struct ls_pcie *pcie);
> +};
> +
>  struct ls_pcie_drvdata {
> +     const u32 pf_off;
> +     const u32 lut_off;
>       const struct dw_pcie_host_ops *ops;
> +     const struct ls_pcie_host_pm_ops *pm_ops;
>  };
>  
>  struct ls_pcie {
>       struct dw_pcie *pci;
>       const struct ls_pcie_drvdata *drvdata;
> +     void __iomem *pf_base;
> +     void __iomem *lut_base;
> +     bool big_endian;
> +     bool ep_presence;
> +     bool pm_support;
> +     struct regmap *scfg;
> +     int index;
>  };
>  
> +#define ls_pcie_lut_readl_addr(addr) ls_pcie_lut_readl(pcie, addr)
> +#define ls_pcie_pf_readl_addr(addr)  ls_pcie_pf_readl(pcie, addr)
>  #define to_ls_pcie(x)        dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -86,6 +138,208 @@ static void ls_pcie_fix_error_response(struct ls_pcie 
> *pcie)
>       iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> +static u32 ls_pcie_lut_readl(struct ls_pcie *pcie, u32 off)
> +{
> +     if (pcie->big_endian)
> +             return ioread32be(pcie->lut_base + off);
> +
> +     return ioread32(pcie->lut_base + off);
> +}
> +
> +static void ls_pcie_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> +     if (pcie->big_endian)
> +             return iowrite32be(val, pcie->lut_base + off);
> +
> +     return iowrite32(val, pcie->lut_base + off);
> +
> +}
> +
> +static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +{
> +     if (pcie->big_endian)
> +             return ioread32be(pcie->pf_base + off);
> +
> +     return ioread32(pcie->pf_base + off);
> +}
> +
> +static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +{
> +     if (pcie->big_endian)
> +             return iowrite32be(val, pcie->pf_base + off);
> +
> +     return iowrite32(val, pcie->pf_base + off);
> +
> +}
> +
> +static void ls_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +     int ret;
> +
> +     val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +     val |= PF_MCR_PTOMR;
> +     ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +     ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +                              val, !(val & PF_MCR_PTOMR), 100, 10000);
> +     if (ret)
> +             dev_info(pcie->pci->dev, "poll turn off message timeout\n");
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +
> +     if (!pcie->scfg) {
> +             dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> +             return;
> +     }
> +
> +     /* Send Turn_off message */
> +     regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> +     val |= PMXMTTURNOFF;
> +     regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> +
> +     mdelay(10);
> +
> +     /* Clear Turn_off message */
> +     regmap_read(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), &val);
> +     val &= ~PMXMTTURNOFF;
> +     regmap_write(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), val);
> +}
> +
> +static void ls1043a_pcie_send_turnoff_msg(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +
> +     if (!pcie->scfg) {
> +             dev_dbg(pcie->pci->dev, "SYSCFG is NULL\n");
> +             return;
> +     }
> +
> +     /* Send Turn_off message */
> +     regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> +     val |= PEXPME(pcie->index);
> +     regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> +
> +     mdelay(10);
> +
> +     /* Clear Turn_off message */
> +     regmap_read(pcie->scfg, SCFG_PEXPMECR, &val);
> +     val &= ~PEXPME(pcie->index);
> +     regmap_write(pcie->scfg, SCFG_PEXPMECR, val);
> +}
> +
> +static void ls_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +     int ret;
> +
> +     val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +     val |= PF_MCR_EXL2S;
> +     ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +
> +     ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +                              val, !(val & PF_MCR_EXL2S), 100, 10000);
> +     if (ret)
> +             dev_info(pcie->pci->dev, "poll exit L2 state timeout\n");
> +}
> +
> +static void ls_pcie_retrain_link(struct ls_pcie *pcie)
> +{
> +     struct dw_pcie *pci = pcie->pci;
> +     u32 val;
> +
> +     val = dw_pcie_readw_dbi(pci, PCIE_LNKCTL);
> +     val |= PCI_EXP_LNKCTL_RL;
> +     dw_pcie_writew_dbi(pci, PCIE_LNKCTL, val);
> +}
> +
> +static void ls1021a_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +
> +     regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> +     val |= PEXSR(pcie->index);
> +     regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> +
> +     regmap_read(pcie->scfg, SCFG_PEXSFTRSTCR, &val);
> +     val &= ~PEXSR(pcie->index);
> +     regmap_write(pcie->scfg, SCFG_PEXSFTRSTCR, val);
> +
> +     mdelay(1);
> +
> +     ls_pcie_retrain_link(pcie);
> +}
> +static void ls1043a_pcie_exit_from_l2(struct ls_pcie *pcie)
> +{
> +     u32 val;
> +
> +     val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> +     val |= LDBG_WE;
> +     ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +     val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> +     val |= LDBG_SR;
> +     ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +     val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> +     val &= ~LDBG_SR;
> +     ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +     val = ls_pcie_lut_readl(pcie, LS_PCIE_LDBG);
> +     val &= ~LDBG_WE;
> +     ls_pcie_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +     mdelay(1);
> +
> +     ls_pcie_retrain_link(pcie);
> +}
> +
> +static int ls1021a_pcie_pm_init(struct ls_pcie *pcie)
> +{
> +     struct device *dev = pcie->pci->dev;
> +     u32 index[2];
> +     int ret;
> +
> +     pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node,
> +                                                  "fsl,pcie-scfg");
> +     if (IS_ERR(pcie->scfg)) {
> +             ret = PTR_ERR(pcie->scfg);
> +             dev_err(dev, "No syscfg phandle specified\n");
> +             pcie->scfg = NULL;
> +             return ret;
> +     }
> +
> +     ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg",
> +                                      index, 2);
> +     if (ret) {
> +             pcie->scfg = NULL;
> +             return ret;
> +     }
> +
> +     pcie->index = index[1];
> +
> +     return 0;
> +}
> +
> +static int ls_pcie_pm_init(struct ls_pcie *pcie)
> +{
> +     return 0;
> +}
> +
> +static void ls_pcie_set_dstate(struct ls_pcie *pcie, u32 dstate)
> +{
> +     struct dw_pcie *pci = pcie->pci;
> +     u32 val;
> +
> +     val = dw_pcie_readw_dbi(pci, PCIE_PM_SCR);
> +     val &= ~PCI_PM_CTRL_STATE_MASK;
> +     val |= dstate;
> +     dw_pcie_writew_dbi(pci, PCIE_PM_SCR, val);
> +}
> +
>  static int ls_pcie_host_init(struct pcie_port *pp)
>  {
>       struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -133,20 +387,52 @@ static int ls_pcie_msi_host_init(struct pcie_port *pp)
>       return 0;
>  }
>  
> +static struct ls_pcie_host_pm_ops ls1021a_pcie_host_pm_ops = {
> +     .pm_init = &ls1021a_pcie_pm_init,
> +     .send_turn_off_message = &ls1021a_pcie_send_turnoff_msg,
> +     .exit_from_l2 = &ls1021a_pcie_exit_from_l2,
> +};
> +
> +static struct ls_pcie_host_pm_ops ls1043a_pcie_host_pm_ops = {
> +     .pm_init = &ls1021a_pcie_pm_init,
> +     .send_turn_off_message = &ls1043a_pcie_send_turnoff_msg,
> +     .exit_from_l2 = &ls1043a_pcie_exit_from_l2,
> +};
> +
> +static struct ls_pcie_host_pm_ops ls_pcie_host_pm_ops = {
> +     .pm_init = &ls_pcie_pm_init,
> +     .send_turn_off_message = &ls_pcie_send_turnoff_msg,
> +     .exit_from_l2 = &ls_pcie_exit_from_l2,
> +};
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>       .host_init = ls_pcie_host_init,
>       .msi_host_init = ls_pcie_msi_host_init,
>  };
>  
> +static const struct ls_pcie_drvdata ls1021a_drvdata = {
> +     .ops = &ls_pcie_host_ops,
> +     .pm_ops = &ls1021a_pcie_host_pm_ops,
> +};
> +
> +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> +     .ops = &ls_pcie_host_ops,
> +     .lut_off = 0x10000,
> +     .pm_ops = &ls1043a_pcie_host_pm_ops,
> +};
> +
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>       .ops = &ls_pcie_host_ops,
> +     .lut_off = 0x80000,
> +     .pf_off = 0xc0000,
> +     .pm_ops = &ls_pcie_host_pm_ops,
>  };
>  
>  static const struct of_device_id ls_pcie_of_match[] = {
>       { .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
> -     { .compatible = "fsl,ls1021a-pcie", .data = &layerscape_drvdata },
> +     { .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
>       { .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> -     { .compatible = "fsl,ls1043a-pcie", .data = &layerscape_drvdata },
> +     { .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
>       { .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
>       { .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
>       { .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> @@ -170,6 +456,15 @@ static int __init ls_add_pcie_port(struct ls_pcie *pcie)
>               return ret;
>       }
>  
> +     if (dw_pcie_link_up(pci)) {
> +             dev_dbg(pci->dev, "Endpoint is present\n");
> +             pcie->ep_presence = true;
> +     }
> +
> +     if (pcie->drvdata->pm_ops && pcie->drvdata->pm_ops->pm_init &&
> +         !pcie->drvdata->pm_ops->pm_init(pcie))
> +             pcie->pm_support = true;
> +
>       return 0;
>  }
>  
> @@ -200,6 +495,14 @@ static int __init ls_pcie_probe(struct platform_device 
> *pdev)
>       if (IS_ERR(pci->dbi_base))
>               return PTR_ERR(pci->dbi_base);
>  
> +     pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
> +
> +     if (pcie->drvdata->lut_off)
> +             pcie->lut_base = pci->dbi_base + pcie->drvdata->lut_off;
> +
> +     if (pcie->drvdata->pf_off)
> +             pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +
>       if (!ls_pcie_is_bridge(pcie))
>               return -ENODEV;
>  
> @@ -212,11 +515,88 @@ static int __init ls_pcie_probe(struct platform_device 
> *pdev)
>       return 0;
>  }
>  
> +static bool ls_pcie_pm_check(struct ls_pcie *pcie)
> +{
> +     if (!pcie->ep_presence) {
> +             dev_dbg(pcie->pci->dev, "Endpoint isn't present\n");
> +             return false;
> +     }
> +
> +     if (!pcie->pm_support)
> +             return false;
> +
> +     return true;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int ls_pcie_suspend_noirq(struct device *dev)

Why is noirq variant needed? Most drivers don't need this.

> +{
> +     struct ls_pcie *pcie = dev_get_drvdata(dev);
> +     struct dw_pcie *pci = pcie->pci;
> +     u32 val;
> +     int ret;
> +
> +     if (!ls_pcie_pm_check(pcie))
> +             return 0;
> +
> +     pcie->drvdata->pm_ops->send_turn_off_message(pcie);
> +
> +     /* 10ms timeout to check L2 ready */
> +     ret = readl_poll_timeout(pci->dbi_base + PCIE_PORT_DEBUG0,
> +                              val, LS_PCIE_IS_L2(val), 100, 10000);
> +     if (ret) {
> +             dev_err(dev, "PCIe link enter L2 timeout! ltssm = 0x%x\n", val);
> +             return ret;
> +     }
> +
> +     ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D3);
> +
> +     return 0;
> +}
> +
> +static int ls_pcie_resume_noirq(struct device *dev)
> +{
> +     struct ls_pcie *pcie = dev_get_drvdata(dev);
> +     struct dw_pcie *pci = pcie->pci;
> +     int ret;
> +
> +     if (!ls_pcie_pm_check(pcie))
> +             return 0;
> +
> +     ls_pcie_set_dstate(pcie, PCIE_PM_SCR_PMEPS_D0);
> +
> +     pcie->drvdata->pm_ops->exit_from_l2(pcie);
> +
> +     /* delay 10ms to access EP */
> +     mdelay(10);
> +
> +     ret = ls_pcie_host_init(&pci->pp);
> +     if (ret) {
> +             dev_err(dev, "ls_pcie_host_init failed! ret = 0x%x\n", ret);
> +             return ret;
> +     }
> +
> +     ret = dw_pcie_wait_for_link(pci);
> +     if (ret) {
> +             dev_err(dev, "wait link up timeout! ret = 0x%x\n", ret);
> +             return ret;
> +     }
> +
> +     return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static const struct dev_pm_ops ls_pcie_pm_ops = {
> +     SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(ls_pcie_suspend_noirq,
> +                                   ls_pcie_resume_noirq)
> +};
> +
>  static struct platform_driver ls_pcie_driver = {
>       .driver = {
>               .name = "layerscape-pcie",
>               .of_match_table = ls_pcie_of_match,
>               .suppress_bind_attrs = true,
> +             .pm = &ls_pcie_pm_ops,
>       },
>  };
>  builtin_platform_driver_probe(ls_pcie_driver, ls_pcie_probe);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h 
> b/drivers/pci/controller/dwc/pcie-designware.h
> index f911760dcc69..1f2fd03d1eba 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -46,6 +46,7 @@
>  #define PCIE_PORT_DEBUG0             0x728
>  #define PORT_LOGIC_LTSSM_STATE_MASK  0x1f
>  #define PORT_LOGIC_LTSSM_STATE_L0    0x11
> +#define PORT_LOGIC_LTSSM_STATE_L2    0x15
>  #define PCIE_PORT_DEBUG1             0x72C
>  #define PCIE_PORT_DEBUG1_LINK_UP             BIT(4)
>  #define PCIE_PORT_DEBUG1_LINK_IN_TRAINING    BIT(29)
> -- 
> 2.17.1
> 

Reply via email to