The convention for node names is to use hyphens, not underscores. dtschema for pca95xx expects GPIO hogs to end with 'hog' prefix.
Signed-off-by: Krzysztof Kozlowski <[email protected]> --- arch/arm/boot/dts/armada-388-clearfog.dts | 4 ++-- arch/arm/boot/dts/armada-388-clearfog.dtsi | 10 +++++----- arch/arm/boot/dts/armada-388-helios4.dts | 6 +++--- 3 files changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 20f8d4667753..4140a5303b48 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -73,13 +73,13 @@ * 14-SFP_TX_DISABLE * 15-SFP_MOD_DEF0 */ - pcie2_0_clkreq { + pcie2-0-clkreq-hog { gpio-hog; gpios = <4 GPIO_ACTIVE_LOW>; input; line-name = "pcie2.0-clkreq"; }; - pcie2_0_w_disable { + pcie2-0-w-disable-hog { gpio-hog; gpios = <7 GPIO_ACTIVE_LOW>; output-low; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi index a0aa1d188f0c..f8a06ae4a3c9 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi @@ -141,31 +141,31 @@ #gpio-cells = <2>; reg = <0x20>; - pcie1_0_clkreq { + pcie1-0-clkreq-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "pcie1.0-clkreq"; }; - pcie1_0_w_disable { + pcie1-0-w-disable-hog { gpio-hog; gpios = <3 GPIO_ACTIVE_LOW>; output-low; line-name = "pcie1.0-w-disable"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_LOW>; input; line-name = "usb3-current-limit"; }; - usb3_power { + usb3-power-hog { gpio-hog; gpios = <6 GPIO_ACTIVE_HIGH>; output-high; line-name = "usb3-power"; }; - m2_devslp { + m2-devslp-hog { gpio-hog; gpios = <11 GPIO_ACTIVE_HIGH>; output-low; diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts index fb49df2a3bce..b3728de3bd3f 100644 --- a/arch/arm/boot/dts/armada-388-helios4.dts +++ b/arch/arm/boot/dts/armada-388-helios4.dts @@ -166,19 +166,19 @@ interrupt-controller; #interrupt-cells = <2>; - board_rev_bit_0 { + board-rev-bit-0-hog { gpio-hog; gpios = <0 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-0"; }; - board_rev_bit_1 { + board-rev-bit-1-hog { gpio-hog; gpios = <1 GPIO_ACTIVE_LOW>; input; line-name = "board-rev-1"; }; - usb3_ilimit { + usb3-ilimit-hog { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; input; -- 2.17.1
