On Tue, Sep 15, 2020 at 11:49 PM Zhiqiang Hou <zhiqiang....@nxp.com> wrote: > > From: Hou Zhiqiang <zhiqiang....@nxp.com> > > On NXP Layerscape platforms, it results in SError in the > enumeration of the PCIe controller, which is not connecting > with an Endpoint device. And it doesn't make sense to > enumerate the Endpoints when the PCIe link is down. So this > patch added the link up check to avoid to fire configuration > transactions on link down bus.
Michael reported the same issue as well. What happens if the link goes down between the check and the access? It's a racy check. I'd like to find an alternative solution. It's even worse if Layerscape is used in ECAM mode. I looked at the EDK2 setup for layerscape[1] and it looks like root ports are just skipped if link is down. Maybe a link down just never happens once up, but if so, then we only need to check it once and fail probe. I've dug into this a bit more and am curious about the PCIE_ABSERR register setting which is set to: #define PCIE_ABSERR_SETTING 0x9401 /* Forward error of non-posted request */ It seems to me this is not what we want at least for config accesses, but commit 84d897d6993 where this was added seems to say otherwise. Is it not possible to configure the response per access type? This appears to be a standard DWC register as the tegra driver defines this address as PORT_LOGIC_AMBA_ERROR_RESPONSE_DEFAULT. Perhaps someone can shed some light on what this register contains. Rob [1] https://git.linaro.org/leg/noupstream/edk2-platforms.git/tree/Silicon/NXP/Library/PciHostBridgeLib/PciHostBridgeLib.c?h=developer-box#n756 > > [ 0.807773] SError Interrupt on CPU2, code 0xbf000002 -- SError > [ 0.807775] CPU: 2 PID: 1 Comm: swapper/0 Not tainted > 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 > [ 0.807776] Hardware name: LS1046A RDB Board (DT) > [ 0.807777] pstate: 20000085 (nzCv daIf -PAN -UAO BTYPE=--) > [ 0.807778] pc : pci_generic_config_read+0x3c/0xe0 > [ 0.807778] lr : pci_generic_config_read+0x24/0xe0 > [ 0.807779] sp : ffff80001003b7b0 > [ 0.807780] x29: ffff80001003b7b0 x28: ffff80001003ba74 > [ 0.807782] x27: ffff000971d96800 x26: ffff00096e77e0a8 > [ 0.807784] x25: ffff80001003b874 x24: ffff80001003b924 > [ 0.807786] x23: 0000000000000004 x22: 0000000000000000 > [ 0.807788] x21: 0000000000000000 x20: ffff80001003b874 > [ 0.807790] x19: 0000000000000004 x18: ffffffffffffffff > [ 0.807791] x17: 00000000000000c0 x16: fffffe0025981840 > [ 0.807793] x15: ffffb94c75b69948 x14: 62203a383634203a > [ 0.807795] x13: 666e6f635f726568 x12: 202c31203d207265 > [ 0.807797] x11: 626d756e3e2d7375 x10: 656877202c307830 > [ 0.807799] x9 : 203d206e66766564 x8 : 0000000000000908 > [ 0.807801] x7 : 0000000000000908 x6 : ffff800010900000 > [ 0.807802] x5 : ffff00096e77e080 x4 : 0000000000000000 > [ 0.807804] x3 : 0000000000000003 x2 : 84fa3440ff7e7000 > [ 0.807806] x1 : 0000000000000000 x0 : ffff800010034000 > [ 0.807808] Kernel panic - not syncing: Asynchronous SError Interrupt > [ 0.807809] CPU: 2 PID: 1 Comm: swapper/0 Not tainted > 5.9.0-rc5-next-20200914-00001-gf965d3ec86fa #67 > [ 0.807810] Hardware name: LS1046A RDB Board (DT) > [ 0.807811] Call trace: > [ 0.807812] dump_backtrace+0x0/0x1c0 > [ 0.807813] show_stack+0x18/0x28 > [ 0.807814] dump_stack+0xd8/0x134 > [ 0.807814] panic+0x180/0x398 > [ 0.807815] add_taint+0x0/0xb0 > [ 0.807816] arm64_serror_panic+0x78/0x88 > [ 0.807817] do_serror+0x68/0x180 > [ 0.807818] el1_error+0x84/0x100 > [ 0.807818] pci_generic_config_read+0x3c/0xe0 > [ 0.807819] dw_pcie_rd_other_conf+0x78/0x110 > [ 0.807820] pci_bus_read_config_dword+0x88/0xe8 > [ 0.807821] pci_bus_generic_read_dev_vendor_id+0x30/0x1b0 > [ 0.807822] pci_bus_read_dev_vendor_id+0x4c/0x78 > [ 0.807823] pci_scan_single_device+0x80/0x100 > [ 0.807824] pci_scan_slot+0x38/0x130 > [ 0.807825] pci_scan_child_bus_extend+0x54/0x2a0 > [ 0.807826] pci_scan_child_bus+0x14/0x20 > [ 0.807827] pci_scan_bridge_extend+0x230/0x570 > [ 0.807828] pci_scan_child_bus_extend+0x134/0x2a0 > [ 0.807829] pci_scan_root_bus_bridge+0x64/0xf0 > [ 0.807829] pci_host_probe+0x18/0xc8 > [ 0.807830] dw_pcie_host_init+0x220/0x378 > [ 0.807831] ls_pcie_probe+0x104/0x140 > [ 0.807832] platform_drv_probe+0x54/0xa8 > [ 0.807833] really_probe+0x118/0x3e0 > [ 0.807834] driver_probe_device+0x5c/0xc0 > [ 0.807835] device_driver_attach+0x74/0x80 > [ 0.807835] __driver_attach+0x8c/0xd8 > [ 0.807836] bus_for_each_dev+0x7c/0xd8 > [ 0.807837] driver_attach+0x24/0x30 > [ 0.807838] bus_add_driver+0x154/0x200 > [ 0.807839] driver_register+0x64/0x120 > [ 0.807839] __platform_driver_probe+0x7c/0x148 > [ 0.807840] ls_pcie_driver_init+0x24/0x30 > [ 0.807841] do_one_initcall+0x60/0x1d8 > [ 0.807842] kernel_init_freeable+0x1f4/0x24c > [ 0.807843] kernel_init+0x14/0x118 > [ 0.807843] ret_from_fork+0x10/0x34 > [ 0.807854] SMP: stopping secondary CPUs > [ 0.807855] Kernel Offset: 0x394c64080000 from 0xffff800010000000 > [ 0.807856] PHYS_OFFSET: 0xffff8bfd40000000 > [ 0.807856] CPU features: 0x0240022,21806000 > [ 0.807857] Memory Limit: none > > Fixes: c2b0c098fbd1 ("PCI: dwc: Use generic config accessors") > Signed-off-by: Hou Zhiqiang <zhiqiang....@nxp.com> > --- > drivers/pci/controller/dwc/pcie-designware-host.c | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c > b/drivers/pci/controller/dwc/pcie-designware-host.c > index c01c9d2fb3f9..e82b518430c5 100644 > --- a/drivers/pci/controller/dwc/pcie-designware-host.c > +++ b/drivers/pci/controller/dwc/pcie-designware-host.c > @@ -442,6 +442,9 @@ static void __iomem *dw_pcie_other_conf_map_bus(struct > pci_bus *bus, > struct pcie_port *pp = bus->sysdata; > struct dw_pcie *pci = to_dw_pcie_from_pp(pp); > > + if (!dw_pcie_link_up(pci)) > + return NULL; > + > busdev = PCIE_ATU_BUS(bus->number) | PCIE_ATU_DEV(PCI_SLOT(devfn)) | > PCIE_ATU_FUNC(PCI_FUNC(devfn)); > > -- > 2.17.1 >
