On 17/09/2020 08:59, Neil Armstrong wrote: > The Amlogic AXG is close to the GXL Glue but with a single OTG PHY. > > Signed-off-by: Neil Armstrong <[email protected]> > Reviewed-by: Kevin Hilman <[email protected]> > Acked-by: Martin Blumenstingl <[email protected]>
Forgot: Reviewed-by: Rob Herring <[email protected]> Neil > --- > .../usb/amlogic,meson-g12a-usb-ctrl.yaml | 22 ++++++++++++++++++- > 1 file changed, 21 insertions(+), 1 deletion(-) > > diff --git > a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml > b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml > index 5b04a7dfa018..c0058332b967 100644 > --- a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml > +++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml > @@ -25,13 +25,14 @@ description: | > The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in > host-only mode. > > - The Amlogic GXL & GXM SoCs doesn't embed an USB3 PHY. > + The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY. > > properties: > compatible: > enum: > - amlogic,meson-gxl-usb-ctrl > - amlogic,meson-gxm-usb-ctrl > + - amlogic,meson-axg-usb-ctrl > - amlogic,meson-g12a-usb-ctrl > - amlogic,meson-a1-usb-ctrl > > @@ -151,6 +152,25 @@ allOf: > > required: > - clock-names > + - if: > + properties: > + compatible: > + enum: > + - amlogic,meson-axg-usb-ctrl > + > + then: > + properties: > + phy-names: > + items: > + - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used > + clocks: > + minItems: 2 > + clock-names: > + items: > + - const: usb_ctrl > + - const: ddr > + required: > + - clock-names > - if: > properties: > compatible: >
