On Wed, 16 Sep 2020 12:29:28 +0300 Alexandru Ardelean <alexandru.ardel...@analog.com> wrote:
> From: Sergiu Cuciurean <sergiu.cuciur...@analog.com> > > As part of the general cleanup of indio_dev->mlock, this change replaces > it with a local lock, to protect against any other accesses during the > reading of sample. Reading a sample requires multiple consecutive regmap > operations and a completion callback, so this requires that no other > read occurs until it completes. > > This is part of a bigger cleanup. > Link: > https://lore.kernel.org/linux-iio/CA+U=dsoo6yabe5odlp+efnpgfdjk5zeqecegkqjxxcvehlw...@mail.gmail.com/ > > Signed-off-by: Sergiu Cuciurean <sergiu.cuciur...@analog.com> > Signed-off-by: Alexandru Ardelean <alexandru.ardel...@analog.com> This seems simple enough so I've applied it to the togreg branch of iio.git Thanks, Jonathan > --- > drivers/iio/adc/fsl-imx25-gcq.c | 15 +++++++++++++-- > 1 file changed, 13 insertions(+), 2 deletions(-) > > diff --git a/drivers/iio/adc/fsl-imx25-gcq.c b/drivers/iio/adc/fsl-imx25-gcq.c > index 8cb51cf7a816..ab5139e911c3 100644 > --- a/drivers/iio/adc/fsl-imx25-gcq.c > +++ b/drivers/iio/adc/fsl-imx25-gcq.c > @@ -40,6 +40,15 @@ struct mx25_gcq_priv { > int irq; > struct regulator *vref[4]; > u32 channel_vref_mv[MX25_NUM_CFGS]; > + /* > + * Lock to protect the device state during a potential concurrent > + * read access from userspace. Reading a raw value requires a sequence > + * of register writes, then a wait for a completion callback, > + * and finally a register read, during which userspace could issue > + * another read request. This lock protects a read access from > + * ocurring before another one has finished. > + */ > + struct mutex lock; > }; > > #define MX25_CQG_CHAN(chan, id) {\ > @@ -137,9 +146,9 @@ static int mx25_gcq_read_raw(struct iio_dev *indio_dev, > > switch (mask) { > case IIO_CHAN_INFO_RAW: > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&priv->lock); > ret = mx25_gcq_get_raw_value(&indio_dev->dev, chan, priv, val); > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&priv->lock); > return ret; > > case IIO_CHAN_INFO_SCALE: > @@ -314,6 +323,8 @@ static int mx25_gcq_probe(struct platform_device *pdev) > return PTR_ERR(priv->regs); > } > > + mutex_init(&priv->lock); > + > init_completion(&priv->completed); > > ret = mx25_gcq_setup_cfgs(pdev, priv);
