On Sat, 17 Nov 2007, Thomas Gleixner wrote:
> Linus,
>
> please pull x86 updates for 2.6.24 from:
>
> ssh://master.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
> master
>
> Thanks,
>
> tglx
FYI,
Just added Sam's latest fix for the x86 build mechanism on top of the patches
below.
Thanks,
tglx
> Andreas Herrmann (2):
> x86: fix cpu-hotplug regression
> x86: show cpuinfo only for online CPUs
>
> David P. Reed (3):
> ntp: fix typo that makes sync_cmos_clock erratic
> x86: fix freeze in x86_64 RTC update code in time_64.c
> x86: on x86_64, correct reading of PC RTC when update in progress in
> time_64.c
>
> Denys (1):
> x86: reboot fixup for wrap2c board
>
> Ingo Molnar (1):
> x86: ignore the sys_getcpu() tcache parameter
>
> Randy Dunlap (3):
> x86: fix voyager_cat_init section
> x86: fix smp init sections
> x86: voyager use correct header file name
>
> Thomas Gleixner (4):
> x86: fix bogus memcpy in es7000_check_dsdt()
> x86: fixup cpu_info array conversion
> Remove x86 merge artifact from top Makefile
> x86: add hpet sanity checks
>
> Truxton Fulton (1):
> x86: fix reboot with no keyboard attached
>
> Yinghai Lu (1):
> x86: check boundary in count setup resource
>
> Makefile | 7 +----
> arch/x86/kernel/acpi/boot.c | 32 +++++++++++++++++++++
> arch/x86/kernel/cpu/mcheck/mce_64.c | 2 +-
> arch/x86/kernel/cpu/proc.c | 8 ++---
> arch/x86/kernel/reboot_fixups_32.c | 1 +
> arch/x86/kernel/setup_64.c | 9 ++----
> arch/x86/kernel/time_64.c | 41
> +++++++++++++++-------------
> arch/x86/mach-voyager/voyager_cat.c | 2 +-
> arch/x86/mach-voyager/voyager_smp.c | 4 +-
> arch/x86/pci/acpi.c | 6 ++++
> arch/x86/vdso/vgetcpu.c | 19 +-----------
> include/asm-x86/mach-default/mach_reboot.h | 2 +-
> include/asm-x86/mach-es7000/mach_mpparse.h | 6 ++--
> include/asm-x86/mach-voyager/setup_arch.h | 2 +-
> kernel/sys.c | 20 +-------------
> kernel/time/ntp.c | 2 +-
> 16 files changed, 81 insertions(+), 82 deletions(-)
> diff --git a/Makefile b/Makefile
> index 7f96930..11961a2 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1334,12 +1334,7 @@ else
> ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
> endif
>
> -# Take care of arch/x86
> -ifeq ($(ARCH), $(SRCARCH))
> -ALLSOURCE_ARCHS := $(ARCH)
> -else
> -ALLSOURCE_ARCHS := $(ARCH) $(SRCARCH)
> -endif
> +ALLSOURCE_ARCHS := $(SRCARCH)
>
> define find-sources
> ( for arch in $(ALLSOURCE_ARCHS) ; do \
> diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
> index 289247d..0ca27c7 100644
> --- a/arch/x86/kernel/acpi/boot.c
> +++ b/arch/x86/kernel/acpi/boot.c
> @@ -637,6 +637,38 @@ static int __init acpi_parse_hpet(struct
> acpi_table_header *table)
> }
>
> hpet_address = hpet_tbl->address.address;
> +
> + /*
> + * Some broken BIOSes advertise HPET at 0x0. We really do not
> + * want to allocate a resource there.
> + */
> + if (!hpet_address) {
> + printk(KERN_WARNING PREFIX
> + "HPET id: %#x base: %#lx is invalid\n",
> + hpet_tbl->id, hpet_address);
> + return 0;
> + }
> +#ifdef CONFIG_X86_64
> + /*
> + * Some even more broken BIOSes advertise HPET at
> + * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
> + * some noise:
> + */
> + if (hpet_address == 0xfed0000000000000UL) {
> + if (!hpet_force_user) {
> + printk(KERN_WARNING PREFIX "HPET id: %#x "
> + "base: 0xfed0000000000000 is bogus\n "
> + "try hpet=force on the kernel command line to "
> + "fix it up to 0xfed00000.\n", hpet_tbl->id);
> + hpet_address = 0;
> + return 0;
> + }
> + printk(KERN_WARNING PREFIX
> + "HPET id: %#x base: 0xfed0000000000000 fixed up "
> + "to 0xfed00000.\n", hpet_tbl->id);
> + hpet_address >>= 32;
> + }
> +#endif
> printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
> hpet_tbl->id, hpet_address);
>
> diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c
> b/arch/x86/kernel/cpu/mcheck/mce_64.c
> index 447b351..4b21d29 100644
> --- a/arch/x86/kernel/cpu/mcheck/mce_64.c
> +++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
> @@ -810,7 +810,7 @@ static __cpuinit int mce_create_device(unsigned int cpu)
> int err;
> int i;
>
> - if (!mce_available(&cpu_data(cpu)))
> + if (!mce_available(&boot_cpu_data))
> return -EIO;
>
> memset(&per_cpu(device_mce, cpu).kobj, 0, sizeof(struct kobject));
> diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
> index 066f8c6..3900e46 100644
> --- a/arch/x86/kernel/cpu/proc.c
> +++ b/arch/x86/kernel/cpu/proc.c
> @@ -89,8 +89,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
> int fpu_exception;
>
> #ifdef CONFIG_SMP
> - if (!cpu_online(n))
> - return 0;
> n = c->cpu_index;
> #endif
> seq_printf(m, "processor\t: %d\n"
> @@ -177,14 +175,14 @@ static int show_cpuinfo(struct seq_file *m, void *v)
> static void *c_start(struct seq_file *m, loff_t *pos)
> {
> if (*pos == 0) /* just in case, cpu 0 is not the first */
> - *pos = first_cpu(cpu_possible_map);
> - if ((*pos) < NR_CPUS && cpu_possible(*pos))
> + *pos = first_cpu(cpu_online_map);
> + if ((*pos) < NR_CPUS && cpu_online(*pos))
> return &cpu_data(*pos);
> return NULL;
> }
> static void *c_next(struct seq_file *m, void *v, loff_t *pos)
> {
> - *pos = next_cpu(*pos, cpu_possible_map);
> + *pos = next_cpu(*pos, cpu_online_map);
> return c_start(m, pos);
> }
> static void c_stop(struct seq_file *m, void *v)
> diff --git a/arch/x86/kernel/reboot_fixups_32.c
> b/arch/x86/kernel/reboot_fixups_32.c
> index 1a07bbe..f452726 100644
> --- a/arch/x86/kernel/reboot_fixups_32.c
> +++ b/arch/x86/kernel/reboot_fixups_32.c
> @@ -39,6 +39,7 @@ struct device_fixup {
> static struct device_fixup fixups_table[] = {
> { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
> { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
> +{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE, cs5530a_warm_reset },
> };
>
> /*
> diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
> index 238633d..30d94d1 100644
> --- a/arch/x86/kernel/setup_64.c
> +++ b/arch/x86/kernel/setup_64.c
> @@ -892,7 +892,6 @@ void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
>
> #ifdef CONFIG_SMP
> c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
> - c->cpu_index = 0;
> #endif
> }
>
> @@ -1078,8 +1077,6 @@ static int show_cpuinfo(struct seq_file *m, void *v)
>
>
> #ifdef CONFIG_SMP
> - if (!cpu_online(c->cpu_index))
> - return 0;
> cpu = c->cpu_index;
> #endif
>
> @@ -1171,15 +1168,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
> static void *c_start(struct seq_file *m, loff_t *pos)
> {
> if (*pos == 0) /* just in case, cpu 0 is not the first */
> - *pos = first_cpu(cpu_possible_map);
> - if ((*pos) < NR_CPUS && cpu_possible(*pos))
> + *pos = first_cpu(cpu_online_map);
> + if ((*pos) < NR_CPUS && cpu_online(*pos))
> return &cpu_data(*pos);
> return NULL;
> }
>
> static void *c_next(struct seq_file *m, void *v, loff_t *pos)
> {
> - *pos = next_cpu(*pos, cpu_possible_map);
> + *pos = next_cpu(*pos, cpu_online_map);
> return c_start(m, pos);
> }
>
> diff --git a/arch/x86/kernel/time_64.c b/arch/x86/kernel/time_64.c
> index c821edc..368b194 100644
> --- a/arch/x86/kernel/time_64.c
> +++ b/arch/x86/kernel/time_64.c
> @@ -82,18 +82,15 @@ static int set_rtc_mmss(unsigned long nowtime)
> int retval = 0;
> int real_seconds, real_minutes, cmos_minutes;
> unsigned char control, freq_select;
> + unsigned long flags;
>
> /*
> - * IRQs are disabled when we're called from the timer interrupt,
> - * no need for spin_lock_irqsave()
> + * set_rtc_mmss is called when irqs are enabled, so disable irqs here
> */
> -
> - spin_lock(&rtc_lock);
> -
> + spin_lock_irqsave(&rtc_lock, flags);
> /*
> * Tell the clock it's being set and stop it.
> */
> -
> control = CMOS_READ(RTC_CONTROL);
> CMOS_WRITE(control | RTC_SET, RTC_CONTROL);
>
> @@ -138,7 +135,7 @@ static int set_rtc_mmss(unsigned long nowtime)
> CMOS_WRITE(control, RTC_CONTROL);
> CMOS_WRITE(freq_select, RTC_FREQ_SELECT);
>
> - spin_unlock(&rtc_lock);
> + spin_unlock_irqrestore(&rtc_lock, flags);
>
> return retval;
> }
> @@ -164,21 +161,27 @@ unsigned long read_persistent_clock(void)
> unsigned century = 0;
>
> spin_lock_irqsave(&rtc_lock, flags);
> + /*
> + * if UIP is clear, then we have >= 244 microseconds before RTC
> + * registers will be updated. Spec sheet says that this is the
> + * reliable way to read RTC - registers invalid (off bus) during update
> + */
> + while ((CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
> + cpu_relax();
>
> - do {
> - sec = CMOS_READ(RTC_SECONDS);
> - min = CMOS_READ(RTC_MINUTES);
> - hour = CMOS_READ(RTC_HOURS);
> - day = CMOS_READ(RTC_DAY_OF_MONTH);
> - mon = CMOS_READ(RTC_MONTH);
> - year = CMOS_READ(RTC_YEAR);
> +
> + /* now read all RTC registers while stable with interrupts disabled */
> + sec = CMOS_READ(RTC_SECONDS);
> + min = CMOS_READ(RTC_MINUTES);
> + hour = CMOS_READ(RTC_HOURS);
> + day = CMOS_READ(RTC_DAY_OF_MONTH);
> + mon = CMOS_READ(RTC_MONTH);
> + year = CMOS_READ(RTC_YEAR);
> #ifdef CONFIG_ACPI
> - if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> - acpi_gbl_FADT.century)
> - century = CMOS_READ(acpi_gbl_FADT.century);
> + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
> + acpi_gbl_FADT.century)
> + century = CMOS_READ(acpi_gbl_FADT.century);
> #endif
> - } while (sec != CMOS_READ(RTC_SECONDS));
> -
> spin_unlock_irqrestore(&rtc_lock, flags);
>
> /*
> diff --git a/arch/x86/mach-voyager/voyager_cat.c
> b/arch/x86/mach-voyager/voyager_cat.c
> index 26a2d4c..2132ca6 100644
> --- a/arch/x86/mach-voyager/voyager_cat.c
> +++ b/arch/x86/mach-voyager/voyager_cat.c
> @@ -568,7 +568,7 @@ static voyager_module_t *voyager_initial_module;
> * boot cpu *after* all memory initialisation has been done (so we can
> * use kmalloc) but before smp initialisation, so we can probe the SMP
> * configuration and pick up necessary information. */
> -void
> +void __init
> voyager_cat_init(void)
> {
> voyager_module_t **modpp = &voyager_initial_module;
> diff --git a/arch/x86/mach-voyager/voyager_smp.c
> b/arch/x86/mach-voyager/voyager_smp.c
> index 6937143..88124dd 100644
> --- a/arch/x86/mach-voyager/voyager_smp.c
> +++ b/arch/x86/mach-voyager/voyager_smp.c
> @@ -1900,7 +1900,7 @@ voyager_smp_prepare_cpus(unsigned int max_cpus)
> smp_boot_cpus();
> }
>
> -static void __devinit voyager_smp_prepare_boot_cpu(void)
> +static void __cpuinit voyager_smp_prepare_boot_cpu(void)
> {
> init_gdt(smp_processor_id());
> switch_to_new_gdt();
> @@ -1911,7 +1911,7 @@ static void __devinit voyager_smp_prepare_boot_cpu(void)
> cpu_set(smp_processor_id(), cpu_present_map);
> }
>
> -static int __devinit
> +static int __cpuinit
> voyager_cpu_up(unsigned int cpu)
> {
> /* This only works at boot for x86. See "rewrite" above. */
> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> index 2d88f7c..7e35078 100644
> --- a/arch/x86/pci/acpi.c
> +++ b/arch/x86/pci/acpi.c
> @@ -77,6 +77,9 @@ count_resource(struct acpi_resource *acpi_res, void *data)
> struct acpi_resource_address64 addr;
> acpi_status status;
>
> + if (info->res_num >= PCI_BUS_NUM_RESOURCES)
> + return AE_OK;
> +
> status = resource_to_addr(acpi_res, &addr);
> if (ACPI_SUCCESS(status))
> info->res_num++;
> @@ -93,6 +96,9 @@ setup_resource(struct acpi_resource *acpi_res, void *data)
> unsigned long flags;
> struct resource *root;
>
> + if (info->res_num >= PCI_BUS_NUM_RESOURCES)
> + return AE_OK;
> +
> status = resource_to_addr(acpi_res, &addr);
> if (!ACPI_SUCCESS(status))
> return AE_OK;
> diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c
> index 91f6e85..3b1ae1a 100644
> --- a/arch/x86/vdso/vgetcpu.c
> +++ b/arch/x86/vdso/vgetcpu.c
> @@ -13,32 +13,17 @@
> #include <asm/vgtod.h>
> #include "vextern.h"
>
> -long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache
> *tcache)
> +long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache
> *unused)
> {
> unsigned int dummy, p;
> - unsigned long j = 0;
>
> - /* Fast cache - only recompute value once per jiffies and avoid
> - relatively costly rdtscp/cpuid otherwise.
> - This works because the scheduler usually keeps the process
> - on the same CPU and this syscall doesn't guarantee its
> - results anyways.
> - We do this here because otherwise user space would do it on
> - its own in a likely inferior way (no access to jiffies).
> - If you don't like it pass NULL. */
> - if (tcache && tcache->blob[0] == (j = *vdso_jiffies)) {
> - p = tcache->blob[1];
> - } else if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
> + if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) {
> /* Load per CPU data from RDTSCP */
> rdtscp(dummy, dummy, p);
> } else {
> /* Load per CPU data from GDT */
> asm("lsl %1,%0" : "=r" (p) : "r" (__PER_CPU_SEG));
> }
> - if (tcache) {
> - tcache->blob[0] = j;
> - tcache->blob[1] = p;
> - }
> if (cpu)
> *cpu = p & 0xfff;
> if (node)
> diff --git a/include/asm-x86/mach-default/mach_reboot.h
> b/include/asm-x86/mach-default/mach_reboot.h
> index e23fd9f..6adee6a 100644
> --- a/include/asm-x86/mach-default/mach_reboot.h
> +++ b/include/asm-x86/mach-default/mach_reboot.h
> @@ -49,7 +49,7 @@ static inline void mach_reboot(void)
> udelay(50);
> kb_wait();
> udelay(50);
> - outb(cmd | 0x04, 0x60); /* set "System flag" */
> + outb(cmd | 0x14, 0x60); /* set "System flag" and "Keyboard
> Disabled" */
> udelay(50);
> kb_wait();
> udelay(50);
> diff --git a/include/asm-x86/mach-es7000/mach_mpparse.h
> b/include/asm-x86/mach-es7000/mach_mpparse.h
> index 8aa1054..52ee75c 100644
> --- a/include/asm-x86/mach-es7000/mach_mpparse.h
> +++ b/include/asm-x86/mach-es7000/mach_mpparse.h
> @@ -29,9 +29,9 @@ extern int mps_oem_check(struct mp_config_table *mpc, char
> *oem,
> static inline int es7000_check_dsdt(void)
> {
> struct acpi_table_header header;
> - memcpy(&header, 0, sizeof(struct acpi_table_header));
> - acpi_get_table_header(ACPI_SIG_DSDT, 0, &header);
> - if (!strncmp(header.oem_id, "UNISYS", 6))
> +
> + if (ACPI_SUCCESS(acpi_get_table_header(ACPI_SIG_DSDT, 0, &header)) &&
> + !strncmp(header.oem_id, "UNISYS", 6))
> return 1;
> return 0;
> }
> diff --git a/include/asm-x86/mach-voyager/setup_arch.h
> b/include/asm-x86/mach-voyager/setup_arch.h
> index 1710ae1..71729ca 100644
> --- a/include/asm-x86/mach-voyager/setup_arch.h
> +++ b/include/asm-x86/mach-voyager/setup_arch.h
> @@ -1,5 +1,5 @@
> #include <asm/voyager.h>
> -#include <asm/setup_32.h>
> +#include <asm/setup.h>
> #define VOYAGER_BIOS_INFO ((struct voyager_bios_info *) \
> (&boot_params.apm_bios_info))
>
> diff --git a/kernel/sys.c b/kernel/sys.c
> index 304b541..d1fe71e 100644
> --- a/kernel/sys.c
> +++ b/kernel/sys.c
> @@ -1750,7 +1750,7 @@ asmlinkage long sys_prctl(int option, unsigned long
> arg2, unsigned long arg3,
> }
>
> asmlinkage long sys_getcpu(unsigned __user *cpup, unsigned __user *nodep,
> - struct getcpu_cache __user *cache)
> + struct getcpu_cache __user *unused)
> {
> int err = 0;
> int cpu = raw_smp_processor_id();
> @@ -1758,24 +1758,6 @@ asmlinkage long sys_getcpu(unsigned __user *cpup,
> unsigned __user *nodep,
> err |= put_user(cpu, cpup);
> if (nodep)
> err |= put_user(cpu_to_node(cpu), nodep);
> - if (cache) {
> - /*
> - * The cache is not needed for this implementation,
> - * but make sure user programs pass something
> - * valid. vsyscall implementations can instead make
> - * good use of the cache. Only use t0 and t1 because
> - * these are available in both 32bit and 64bit ABI (no
> - * need for a compat_getcpu). 32bit has enough
> - * padding
> - */
> - unsigned long t0, t1;
> - get_user(t0, &cache->blob[0]);
> - get_user(t1, &cache->blob[1]);
> - t0++;
> - t1++;
> - put_user(t0, &cache->blob[0]);
> - put_user(t1, &cache->blob[1]);
> - }
> return err ? -EFAULT : 0;
> }
>
> diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
> index de6a2d6..14a2ecf 100644
> --- a/kernel/time/ntp.c
> +++ b/kernel/time/ntp.c
> @@ -205,7 +205,7 @@ static void sync_cmos_clock(unsigned long dummy)
> return;
>
> getnstimeofday(&now);
> - if (abs(xtime.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
> + if (abs(now.tv_nsec - (NSEC_PER_SEC / 2)) <= tick_nsec / 2)
> fail = update_persistent_clock(now);
>
> next.tv_nsec = (NSEC_PER_SEC / 2) - now.tv_nsec;
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [EMAIL PROTECTED]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
