Signed-off-by: Thomas Gleixner <t...@linutronix.de>
Cc: Michael Ellerman <m...@ellerman.id.au>
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Cc: Paul Mackerras <pau...@samba.org>
Cc: linuxppc-...@lists.ozlabs.org
---
Note: Completely untested
---
arch/powerpc/Kconfig | 1
arch/powerpc/include/asm/highmem.h | 6 ++-
arch/powerpc/mm/Makefile | 1
arch/powerpc/mm/highmem.c | 67 -------------------------------------
arch/powerpc/mm/mem.c | 7 ---
5 files changed, 6 insertions(+), 76 deletions(-)
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -406,6 +406,7 @@ menu "Kernel options"
config HIGHMEM
bool "High memory support"
depends on PPC32
+ select KMAP_ATOMIC_GENERIC
source "kernel/Kconfig.hz"
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -29,7 +29,6 @@
#include <asm/page.h>
#include <asm/fixmap.h>
-extern pte_t *kmap_pte;
extern pte_t *pkmap_page_table;
/*
@@ -60,6 +59,11 @@ extern pte_t *pkmap_page_table;
#define flush_cache_kmaps() flush_cache_all()
+#define arch_kmap_temp_post_map(vaddr, pteval) \
+ local_flush_tlb_page(NULL, vaddr)
+#define arch_kmap_temp_post_unmap(vaddr) \
+ local_flush_tlb_page(NULL, vaddr)
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_NEED_MULTIPLE_NODES) += num
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
-obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_PPC_COPRO_BASE) += copro_fault.o
obj-$(CONFIG_PPC_PTDUMP) += ptdump/
obj-$(CONFIG_KASAN) += kasan/
--- a/arch/powerpc/mm/highmem.c
+++ /dev/null
@@ -1,67 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * highmem.c: virtual kernel memory mappings for high memory
- *
- * PowerPC version, stolen from the i386 version.
- *
- * Used in CONFIG_HIGHMEM systems for memory pages which
- * are not addressable by direct kernel virtual addresses.
- *
- * Copyright (C) 1999 Gerhard Wichert, Siemens AG
- * gerhard.wich...@pdb.siemens.de
- *
- *
- * Redesigned the x86 32-bit VM architecture to deal with
- * up to 16 Terrabyte physical memory. With current x86 CPUs
- * we now support up to 64 Gigabytes physical RAM.
- *
- * Copyright (C) 1999 Ingo Molnar <mi...@redhat.com>
- *
- * Reworked for PowerPC by various contributors. Moved from
- * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp.
- */
-
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-void *kmap_atomic_high_prot(struct page *page, pgprot_t prot)
-{
- unsigned long vaddr;
- int idx, type;
-
- type = kmap_atomic_idx_push();
- idx = type + KM_TYPE_NR*smp_processor_id();
- vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- WARN_ON(IS_ENABLED(CONFIG_DEBUG_HIGHMEM) && !pte_none(*(kmap_pte -
idx)));
- __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1);
- local_flush_tlb_page(NULL, vaddr);
-
- return (void*) vaddr;
-}
-EXPORT_SYMBOL(kmap_atomic_high_prot);
-
-void kunmap_atomic_high(void *kvaddr)
-{
- unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
-
- if (vaddr < __fix_to_virt(FIX_KMAP_END))
- return;
-
- if (IS_ENABLED(CONFIG_DEBUG_HIGHMEM)) {
- int type = kmap_atomic_idx();
- unsigned int idx;
-
- idx = type + KM_TYPE_NR * smp_processor_id();
- WARN_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
-
- /*
- * force other mappings to Oops if they'll try to access
- * this pte without first remap it
- */
- pte_clear(&init_mm, vaddr, kmap_pte-idx);
- local_flush_tlb_page(NULL, vaddr);
- }
-
- kmap_atomic_idx_pop();
-}
-EXPORT_SYMBOL(kunmap_atomic_high);
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -60,11 +60,6 @@
unsigned long long memory_limit;
bool init_mem_is_free;
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t vma_prot)
{
@@ -233,8 +228,6 @@ void __init paging_init(void)
map_kernel_page(PKMAP_BASE, 0, __pgprot(0)); /* XXX gross */
pkmap_page_table = virt_to_kpte(PKMAP_BASE);
-
- kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN));
#endif /* CONFIG_HIGHMEM */
printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",
