On Thu, Nov 15, 2007 at 01:10:16PM -0800, Lucy McCoy wrote:
 
> static int keyspan_open (struct usb_serial_port *port, struct file *filp)
> {
>       struct keyspan_port_private     *p_priv;
>       struct keyspan_serial_private   *s_priv;
>       struct usb_serial               *serial = port->serial;
>       const struct keyspan_device_details     *d_details;
>       int                             i, err;
>       struct urb                      *urb;
>       
>       s_priv = usb_get_serial_data(serial);
>       p_priv = usb_get_serial_port_data(port);
>       d_details = p_priv->device_details;
>       
>       dbg("%s - port%d.", __FUNCTION__, port->number); 
> 
>       /* Set some sane defaults */
>       p_priv->rts_state = 1;
>       p_priv->dtr_state = 1;
>       p_priv->baud = 9600;
> 
>       /* set CTS/RTS handshake etc. */
>       p_priv->cflag = CS8;   /* 8/N/1  */
>       p_priv->flow_control = flow_none;
> 
>       /* force baud and lcr to be set on open */
>       p_priv->old_baud = 0;
>       p_priv->old_cflag = 0;
> 
>       p_priv->out_flip = 0;
>       p_priv->in_flip = 0;
> 
>       /* Reset low level data toggle and start reading from endpoints */
>       for (i = 0; i < 2; i++) {
>               if ((urb = p_priv->in_urbs[i]) == NULL)
>                       continue;
>               urb->dev = serial->dev;
> 
>               /* make sure endpoint data toggle is synchronized with the 
> device */
>               
>               usb_clear_halt(urb->dev, urb->pipe);
> 
>               if ((err = usb_submit_urb(urb, GFP_KERNEL)) != 0) {
>                       dbg("%s - submit urb %d failed (%d)", __FUNCTION__, i, 
> err);
>               }
>       }
> 
>       /* Reset low level data toggle on out endpoints */
>       for (i = 0; i < 2; i++) {
>               if ((urb = p_priv->out_urbs[i]) == NULL)
>                       continue;
>               urb->dev = serial->dev;
>               /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), 
> usb_pipeout(urb->pipe), 0); */
>       }
> 
>       keyspan_send_setup(port, 1);
>       //mdelay(100);
>       //keyspan_set_termios(port, NULL);
> 
>       return (0);
> }
> 

yes, after testing this i can confirm that this one fixes the NULL ptr
problem here so you might want to submit a proper patch to Greg.

-- 
Regards/Gruß,
    Boris.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to