There is no Makefile rule to have drivers/media/pci/mantis/mantis_core.o
in build since the code overhaul with commit b3b961448f70
("V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add Hopper devices into the 
PCI ID list").

It looks like drivers/media/pci/mantis/mantis_core.c is a leftover.

Remove the orphan code.

Fixes: b3b961448f70 ("V4L/DVB (13795): [Mantis/Hopper] Code overhaul, add 
Hopper devices into the PCI ID list").
Signed-off-by: Necip Fazil Yildiran <fazilyildi...@gmail.com>
---
 drivers/media/pci/mantis/mantis_ca.c   |   1 -
 drivers/media/pci/mantis/mantis_core.c | 200 -------------------------
 drivers/media/pci/mantis/mantis_core.h |   2 -
 3 files changed, 203 deletions(-)
 delete mode 100644 drivers/media/pci/mantis/mantis_core.c

diff --git a/drivers/media/pci/mantis/mantis_ca.c 
b/drivers/media/pci/mantis/mantis_ca.c
index f2baf5e5c921..0fad0a923e35 100644
--- a/drivers/media/pci/mantis/mantis_ca.c
+++ b/drivers/media/pci/mantis/mantis_ca.c
@@ -109,7 +109,6 @@ static int mantis_ts_control(struct dvb_ca_en50221 
*en50221, int slot)
        struct mantis_pci *mantis = ca->ca_priv;
 
        dprintk(MANTIS_DEBUG, 1, "Slot(%d): TS control", slot);
-/*     mantis_set_direction(mantis, 1); */ /* Enable TS through CAM */
 
        return 0;
 }
diff --git a/drivers/media/pci/mantis/mantis_core.c 
b/drivers/media/pci/mantis/mantis_core.c
deleted file mode 100644
index f303f68d4ef2..000000000000
--- a/drivers/media/pci/mantis/mantis_core.c
+++ /dev/null
@@ -1,200 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
-       Mantis PCI bridge driver
-
-       Copyright (C) Manu Abraham (abraham.m...@gmail.com)
-
-*/
-
-#include "mantis_common.h"
-#include "mantis_core.h"
-#include "mantis_vp1033.h"
-#include "mantis_vp1034.h"
-#include "mantis_vp1041.h"
-#include "mantis_vp2033.h"
-#include "mantis_vp2040.h"
-#include "mantis_vp3030.h"
-
-static int read_eeprom_byte(struct mantis_pci *mantis, u8 *data, u8 length)
-{
-       int err;
-       struct i2c_msg msg[] = {
-               {
-                       .addr = 0x50,
-                       .flags = 0,
-                       .buf = data,
-                       .len = 1
-               }, {
-                       .addr = 0x50,
-                       .flags = I2C_M_RD,
-                       .buf = data,
-                       .len = length
-               },
-       };
-
-       err = i2c_transfer(&mantis->adapter, msg, 2);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_ERROR, 1,
-                       "ERROR: i2c read: < err=%i d0=0x%02x d1=0x%02x >",
-                       err, data[0], data[1]);
-
-               return err;
-       }
-
-       return 0;
-}
-
-static int get_mac_address(struct mantis_pci *mantis)
-{
-       int err;
-
-       mantis->mac_address[0] = 0x08;
-       err = read_eeprom_byte(mantis, &mantis->mac_address[0], 6);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_ERROR, 1, "Mantis EEPROM read error");
-
-               return err;
-       }
-       dprintk(verbose, MANTIS_ERROR, 0,
-               "    MAC Address=[%pM]\n", mantis->mac_address);
-
-       return 0;
-}
-
-#define MANTIS_MODEL_UNKNOWN   "UNKNOWN"
-#define MANTIS_DEV_UNKNOWN     "UNKNOWN"
-
-struct mantis_hwconfig unknown_device = {
-       .model_name     = MANTIS_MODEL_UNKNOWN,
-       .dev_type       = MANTIS_DEV_UNKNOWN,
-};
-
-static void mantis_load_config(struct mantis_pci *mantis)
-{
-       switch (mantis->subsystem_device) {
-       case MANTIS_VP_1033_DVB_S:      /* VP-1033 */
-               mantis->hwconfig = &vp1033_mantis_config;
-               break;
-       case MANTIS_VP_1034_DVB_S:      /* VP-1034 */
-               mantis->hwconfig = &vp1034_mantis_config;
-               break;
-       case MANTIS_VP_1041_DVB_S2:     /* VP-1041 */
-       case TECHNISAT_SKYSTAR_HD2:
-               mantis->hwconfig = &vp1041_mantis_config;
-               break;
-       case MANTIS_VP_2033_DVB_C:      /* VP-2033 */
-               mantis->hwconfig = &vp2033_mantis_config;
-               break;
-       case MANTIS_VP_2040_DVB_C:      /* VP-2040 */
-       case CINERGY_C: /* VP-2040 clone */
-       case TECHNISAT_CABLESTAR_HD2:
-               mantis->hwconfig = &vp2040_mantis_config;
-               break;
-       case MANTIS_VP_3030_DVB_T:      /* VP-3030 */
-               mantis->hwconfig = &vp3030_mantis_config;
-               break;
-       default:
-               mantis->hwconfig = &unknown_device;
-               break;
-       }
-}
-
-int mantis_core_init(struct mantis_pci *mantis)
-{
-       int err = 0;
-
-       mantis_load_config(mantis);
-       dprintk(verbose, MANTIS_ERROR, 0, "found a %s PCI %s device on 
(%02x:%02x.%x),\n",
-               mantis->hwconfig->model_name, mantis->hwconfig->dev_type,
-               mantis->pdev->bus->number, PCI_SLOT(mantis->pdev->devfn), 
PCI_FUNC(mantis->pdev->devfn));
-       dprintk(verbose, MANTIS_ERROR, 0, "    Mantis Rev %d [%04x:%04x], ",
-               mantis->revision,
-               mantis->subsystem_vendor, mantis->subsystem_device);
-       dprintk(verbose, MANTIS_ERROR, 0,
-               "irq: %d, latency: %d\n    memory: 0x%lx, mmio: 0x%p\n",
-               mantis->pdev->irq, mantis->latency,
-               mantis->mantis_addr, mantis->mantis_mmio);
-
-       err = mantis_i2c_init(mantis);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_ERROR, 1, "Mantis I2C init failed");
-               return err;
-       }
-       err = get_mac_address(mantis);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_ERROR, 1, "get MAC address failed");
-               return err;
-       }
-       err = mantis_dma_init(mantis);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_ERROR, 1, "Mantis DMA init failed");
-               return err;
-       }
-       err = mantis_dvb_init(mantis);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DVB init failed");
-               return err;
-       }
-       err = mantis_uart_init(mantis);
-       if (err < 0) {
-               dprintk(verbose, MANTIS_DEBUG, 1, "Mantis UART init failed");
-               return err;
-       }
-
-       return 0;
-}
-
-int mantis_core_exit(struct mantis_pci *mantis)
-{
-       mantis_dma_stop(mantis);
-       dprintk(verbose, MANTIS_ERROR, 1, "DMA engine stopping");
-
-       mantis_uart_exit(mantis);
-       dprintk(verbose, MANTIS_ERROR, 1, "UART exit failed");
-
-       if (mantis_dma_exit(mantis) < 0)
-               dprintk(verbose, MANTIS_ERROR, 1, "DMA exit failed");
-       if (mantis_dvb_exit(mantis) < 0)
-               dprintk(verbose, MANTIS_ERROR, 1, "DVB exit failed");
-       if (mantis_i2c_exit(mantis) < 0)
-               dprintk(verbose, MANTIS_ERROR, 1, "I2C adapter delete.. 
failed");
-
-       return 0;
-}
-
-/* Turn the given bit on or off. */
-void gpio_set_bits(struct mantis_pci *mantis, u32 bitpos, u8 value)
-{
-       u32 cur;
-
-       cur = mmread(MANTIS_GPIF_ADDR);
-       if (value)
-               mantis->gpio_status = cur | (1 << bitpos);
-       else
-               mantis->gpio_status = cur & (~(1 << bitpos));
-
-       mmwrite(mantis->gpio_status, MANTIS_GPIF_ADDR);
-       mmwrite(0x00, MANTIS_GPIF_DOUT);
-       udelay(100);
-}
-
-/* direction = 0 , no CI passthrough ; 1 , CI passthrough */
-void mantis_set_direction(struct mantis_pci *mantis, int direction)
-{
-       u32 reg;
-
-       reg = mmread(0x28);
-       dprintk(verbose, MANTIS_DEBUG, 1, "TS direction setup");
-       if (direction == 0x01) {
-               /* to CI */
-               reg |= 0x04;
-               mmwrite(reg, 0x28);
-               reg &= 0xff - 0x04;
-               mmwrite(reg, 0x28);
-       } else {
-               reg &= 0xff - 0x04;
-               mmwrite(reg, 0x28);
-               reg |= 0x04;
-               mmwrite(reg, 0x28);
-       }
-}
diff --git a/drivers/media/pci/mantis/mantis_core.h 
b/drivers/media/pci/mantis/mantis_core.h
index 1b0468ff791c..93c89a10a2c7 100644
--- a/drivers/media/pci/mantis/mantis_core.h
+++ b/drivers/media/pci/mantis/mantis_core.h
@@ -39,7 +39,5 @@ extern void mantis_dma_start(struct mantis_pci *mantis);
 extern void mantis_dma_stop(struct mantis_pci *mantis);
 extern int mantis_i2c_init(struct mantis_pci *mantis);
 extern int mantis_i2c_exit(struct mantis_pci *mantis);
-extern int mantis_core_init(struct mantis_pci *mantis);
-extern int mantis_core_exit(struct mantis_pci *mantis);
 
 #endif /* __MANTIS_CORE_H */
-- 
2.25.1

Reply via email to