[PATCH 1/3] hwmon: (adm9240) Use loops to avoid duplicated code

[Chris Packham]

Use loops for reading temp_max and initialising FAN_MIN/TEMP_MAX rather
than duplicating code.

Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
---
 drivers/hwmon/adm9240.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/hwmon/adm9240.c b/drivers/hwmon/adm9240.c
index 496d47490e10..f95dde1b9c7f 100644
--- a/drivers/hwmon/adm9240.c
+++ b/drivers/hwmon/adm9240.c
@@ -223,10 +223,10 @@ static struct adm9240_data *adm9240_update_device(struct 
device *dev)
                        data->fan_min[i] = i2c_smbus_read_byte_data(client,
                                        ADM9240_REG_FAN_MIN(i));
                }
-               data->temp_max[0] = i2c_smbus_read_byte_data(client,
-                               ADM9240_REG_TEMP_MAX(0));
-               data->temp_max[1] = i2c_smbus_read_byte_data(client,
-                               ADM9240_REG_TEMP_MAX(1));
+               for (i = 0; i < 2; i++) {
+                       data->temp_max[i] = i2c_smbus_read_byte_data(client,
+                                       ADM9240_REG_TEMP_MAX(i));
+               }
 
                /* read fan divs and 5-bit VID */
                i = i2c_smbus_read_byte_data(client, ADM9240_REG_VID_FAN_DIV);
@@ -687,14 +687,14 @@ static void adm9240_init_client(struct i2c_client *client)
                        i2c_smbus_write_byte_data(client,
                                        ADM9240_REG_IN_MAX(i), 255);
                }
-               i2c_smbus_write_byte_data(client,
-                               ADM9240_REG_FAN_MIN(0), 255);
-               i2c_smbus_write_byte_data(client,
-                               ADM9240_REG_FAN_MIN(1), 255);
-               i2c_smbus_write_byte_data(client,
-                               ADM9240_REG_TEMP_MAX(0), 127);
-               i2c_smbus_write_byte_data(client,
-                               ADM9240_REG_TEMP_MAX(1), 127);
+               for (i = 0; i < 2; i++) {
+                       i2c_smbus_write_byte_data(client,
+                                       ADM9240_REG_FAN_MIN(i), 255);
+               }
+               for (i = 0; i < 2; i++) {
+                       i2c_smbus_write_byte_data(client,
+                                       ADM9240_REG_TEMP_MAX(i), 127);
+               }
 
                /* start measurement cycle */
                i2c_smbus_write_byte_data(client, ADM9240_REG_CONFIG, 1);
-- 
2.28.0