From: Priyaranjan Jha <priyar...@google.com>
commit 232aa8ec3ed979d4716891540c03a806ecab0c37 upstream.
Because bbr_target_cwnd() is really a general-purpose BBR helper for
computing some volume of inflight data as a function of the estimated
BDP, refactor it into following helper functions:
- bbr_bdp()
- bbr_quantization_budget()
- bbr_inflight()
Signed-off-by: Priyaranjan Jha <priyar...@google.com>
Signed-off-by: Neal Cardwell <ncardw...@google.com>
Signed-off-by: Yuchung Cheng <ych...@google.com>
Signed-off-by: David S. Miller <da...@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
net/ipv4/tcp_bbr.c | 60 ++++++++++++++++++++++++++++++++++-------------------
1 file changed, 39 insertions(+), 21 deletions(-)
--- a/net/ipv4/tcp_bbr.c
+++ b/net/ipv4/tcp_bbr.c
@@ -315,30 +315,19 @@ static void bbr_cwnd_event(struct sock *
}
}
-/* Find target cwnd. Right-size the cwnd based on min RTT and the
- * estimated bottleneck bandwidth:
+/* Calculate bdp based on min RTT and the estimated bottleneck bandwidth:
*
- * cwnd = bw * min_rtt * gain = BDP * gain
+ * bdp = bw * min_rtt * gain
*
* The key factor, gain, controls the amount of queue. While a small gain
* builds a smaller queue, it becomes more vulnerable to noise in RTT
* measurements (e.g., delayed ACKs or other ACK compression effects). This
* noise may cause BBR to under-estimate the rate.
- *
- * To achieve full performance in high-speed paths, we budget enough cwnd to
- * fit full-sized skbs in-flight on both end hosts to fully utilize the path:
- * - one skb in sending host Qdisc,
- * - one skb in sending host TSO/GSO engine
- * - one skb being received by receiver host LRO/GRO/delayed-ACK engine
- * Don't worry, at low rates (bbr_min_tso_rate) this won't bloat cwnd because
- * in such cases tso_segs_goal is 1. The minimum cwnd is 4 packets,
- * which allows 2 outstanding 2-packet sequences, to try to keep pipe
- * full even with ACK-every-other-packet delayed ACKs.
*/
-static u32 bbr_target_cwnd(struct sock *sk, u32 bw, int gain)
+static u32 bbr_bdp(struct sock *sk, u32 bw, int gain)
{
struct bbr *bbr = inet_csk_ca(sk);
- u32 cwnd;
+ u32 bdp;
u64 w;
/* If we've never had a valid RTT sample, cap cwnd at the initial
@@ -353,7 +342,24 @@ static u32 bbr_target_cwnd(struct sock *
w = (u64)bw * bbr->min_rtt_us;
/* Apply a gain to the given value, then remove the BW_SCALE shift. */
- cwnd = (((w * gain) >> BBR_SCALE) + BW_UNIT - 1) / BW_UNIT;
+ bdp = (((w * gain) >> BBR_SCALE) + BW_UNIT - 1) / BW_UNIT;
+
+ return bdp;
+}
+
+/* To achieve full performance in high-speed paths, we budget enough cwnd to
+ * fit full-sized skbs in-flight on both end hosts to fully utilize the path:
+ * - one skb in sending host Qdisc,
+ * - one skb in sending host TSO/GSO engine
+ * - one skb being received by receiver host LRO/GRO/delayed-ACK engine
+ * Don't worry, at low rates (bbr_min_tso_rate) this won't bloat cwnd because
+ * in such cases tso_segs_goal is 1. The minimum cwnd is 4 packets,
+ * which allows 2 outstanding 2-packet sequences, to try to keep pipe
+ * full even with ACK-every-other-packet delayed ACKs.
+ */
+static u32 bbr_quantization_budget(struct sock *sk, u32 cwnd, int gain)
+{
+ struct bbr *bbr = inet_csk_ca(sk);
/* Allow enough full-sized skbs in flight to utilize end systems. */
cwnd += 3 * bbr_tso_segs_goal(sk);
@@ -368,6 +374,17 @@ static u32 bbr_target_cwnd(struct sock *
return cwnd;
}
+/* Find inflight based on min RTT and the estimated bottleneck bandwidth. */
+static u32 bbr_inflight(struct sock *sk, u32 bw, int gain)
+{
+ u32 inflight;
+
+ inflight = bbr_bdp(sk, bw, gain);
+ inflight = bbr_quantization_budget(sk, inflight, gain);
+
+ return inflight;
+}
+
/* An optimization in BBR to reduce losses: On the first round of recovery, we
* follow the packet conservation principle: send P packets per P packets
acked.
* After that, we slow-start and send at most 2*P packets per P packets acked.
@@ -429,7 +446,8 @@ static void bbr_set_cwnd(struct sock *sk
goto done;
/* If we're below target cwnd, slow start cwnd toward target cwnd. */
- target_cwnd = bbr_target_cwnd(sk, bw, gain);
+ target_cwnd = bbr_bdp(sk, bw, gain);
+ target_cwnd = bbr_quantization_budget(sk, target_cwnd, gain);
if (bbr_full_bw_reached(sk)) /* only cut cwnd if we filled the pipe */
cwnd = min(cwnd + acked, target_cwnd);
else if (cwnd < target_cwnd || tp->delivered < TCP_INIT_CWND)
@@ -470,14 +488,14 @@ static bool bbr_is_next_cycle_phase(stru
if (bbr->pacing_gain > BBR_UNIT)
return is_full_length &&
(rs->losses || /* perhaps pacing_gain*BDP won't fit */
- inflight >= bbr_target_cwnd(sk, bw, bbr->pacing_gain));
+ inflight >= bbr_inflight(sk, bw, bbr->pacing_gain));
/* A pacing_gain < 1.0 tries to drain extra queue we added if bw
* probing didn't find more bw. If inflight falls to match BDP then we
* estimate queue is drained; persisting would underutilize the pipe.
*/
return is_full_length ||
- inflight <= bbr_target_cwnd(sk, bw, BBR_UNIT);
+ inflight <= bbr_inflight(sk, bw, BBR_UNIT);
}
static void bbr_advance_cycle_phase(struct sock *sk)
@@ -736,11 +754,11 @@ static void bbr_check_drain(struct sock
bbr->pacing_gain = bbr_drain_gain; /* pace slow to drain */
bbr->cwnd_gain = bbr_high_gain; /* maintain cwnd */
tcp_sk(sk)->snd_ssthresh =
- bbr_target_cwnd(sk, bbr_max_bw(sk), BBR_UNIT);
+ bbr_inflight(sk, bbr_max_bw(sk), BBR_UNIT);
} /* fall through to check if in-flight is already small: */
if (bbr->mode == BBR_DRAIN &&
tcp_packets_in_flight(tcp_sk(sk)) <=
- bbr_target_cwnd(sk, bbr_max_bw(sk), BBR_UNIT))
+ bbr_inflight(sk, bbr_max_bw(sk), BBR_UNIT))
bbr_reset_probe_bw_mode(sk); /* we estimate queue is drained */
}
