[PATCH v2] iio: adc: gyroadc: fix leak of device node iterator

[Tobias Jordan]

Add missing of_node_put calls when exiting the for_each_child_of_node
loop in rcar_gyroadc_parse_subdevs early.

Also add goto-exception handling for the error paths in that loop.

Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Tobias Jordan <ker...@cdqe.de>
---
v2:
- added an of_node_put to the non-error "break" at the end
- used gotos for the error cases, doesn't look as bad as I thought

 drivers/iio/adc/rcar-gyroadc.c | 21 +++++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index dcaefc108ff6..9f38cf3c7dc2 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -357,7 +357,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                        num_channels = ARRAY_SIZE(rcar_gyroadc_iio_channels_3);
                        break;
                default:
-                       return -EINVAL;
+                       goto err_e_inval;
                }
 
                /*
@@ -374,7 +374,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                                dev_err(dev,
                                        "Failed to get child reg property of 
ADC \"%pOFn\".\n",
                                        child);
-                               return ret;
+                               goto err_of_node_put;
                        }
 
                        /* Channel number is too high. */
@@ -382,7 +382,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                                dev_err(dev,
                                        "Only %i channels supported with %pOFn, 
but reg = <%i>.\n",
                                        num_channels, child, reg);
-                               return -EINVAL;
+                               goto err_e_inval;
                        }
                }
 
@@ -391,7 +391,7 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                        dev_err(dev,
                                "Channel %i uses different ADC mode than the 
rest.\n",
                                reg);
-                       return -EINVAL;
+                       goto err_e_inval;
                }
 
                /* Channel is valid, grab the regulator. */
@@ -401,7 +401,8 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                if (IS_ERR(vref)) {
                        dev_dbg(dev, "Channel %i 'vref' supply not 
connected.\n",
                                reg);
-                       return PTR_ERR(vref);
+                       ret = PTR_ERR(vref);
+                       goto err_of_node_put;
                }
 
                priv->vref[reg] = vref;
@@ -425,8 +426,10 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
                 * attached to the GyroADC at a time, so if we found it,
                 * we can stop parsing here.
                 */
-               if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A)
+               if (childmode == RCAR_GYROADC_MODE_SELECT_1_MB88101A) {
+                       of_node_put(child);
                        break;
+               }
        }
 
        if (first) {
@@ -435,6 +438,12 @@ static int rcar_gyroadc_parse_subdevs(struct iio_dev 
*indio_dev)
        }
 
        return 0;
+
+err_e_inval:
+       ret = -EINVAL;
+err_of_node_put:
+       of_node_put(child);
+       return ret;
 }
 
 static void rcar_gyroadc_deinit_supplies(struct iio_dev *indio_dev)
-- 
2.20.1