Hello,
On Thu, Sep 17, 2020 at 06:42:23PM +0100, Lad Prabhakar wrote:
> Add support to read the bus-type for V4L2_MBUS_BT656 and enable BT.656
> mode in the sensor if needed.
>
> For backward compatibility with older DTS where the bus-type property was
> not mandatory, assume V4L2_MBUS_PARALLEL as it was the only supported bus
> at the time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
> 'bus-type' is not specified.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad...@bp.renesas.com>
> Reviewed-by: Biju Das <biju.das...@bp.renesas.com>
Reviewed-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
Thanks
j
> ---
> drivers/media/i2c/ov772x.c | 23 +++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index f61a3f09ad64..fe48b5881ad9 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -583,6 +583,13 @@ static int ov772x_s_stream(struct v4l2_subdev *sd, int
> enable)
> if (priv->streaming == enable)
> goto done;
>
> + if (priv->bus_type == V4L2_MBUS_BT656) {
> + ret = regmap_update_bits(priv->regmap, COM7, ITU656_ON_OFF,
> + enable ? ITU656_ON_OFF :
> ~ITU656_ON_OFF);
> + if (ret)
> + goto done;
> + }
> +
> ret = regmap_update_bits(priv->regmap, COM2, SOFT_SLEEP_MODE,
> enable ? 0 : SOFT_SLEEP_MODE);
> if (ret)
> @@ -1364,10 +1371,22 @@ static int ov772x_parse_dt(struct i2c_client *client,
> return -EINVAL;
> }
>
> + /*
> + * For backward compatibility with older DTS where the
> + * bus-type property was not mandatory, assume
> + * V4L2_MBUS_PARALLEL as it was the only supported bus at the
> + * time. v4l2_fwnode_endpoint_alloc_parse() will not fail if
> + * 'bus-type' is not specified.
> + */
> bus_cfg.bus_type = V4L2_MBUS_PARALLEL;
> ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> - if (ret)
> - goto error_fwnode_put;
> + if (ret) {
> + bus_cfg = (struct v4l2_fwnode_endpoint)
> + { .bus_type = V4L2_MBUS_BT656 };
> + ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
> + if (ret)
> + goto error_fwnode_put;
> + }
>
> priv->bus_type = bus_cfg.bus_type;
> v4l2_fwnode_endpoint_free(&bus_cfg);
> --
> 2.17.1
>
