Hi Pierre, I've been checking my SDIO CMD53 data transfers and I notice the following:
block size = 256 bytes for my SDIO card. transfers of 256 bytes uses byte mode ( I expected block mode ) transfers of 512 bytes uses block mode ( because blocks = 2 ) >From the SD spec a single block transfer seems to be valid. I notice the function mmc_io_rw_extended() in sdio_ops.c seems to select byte mode when the transfer size is 512 or less when the blocks parameter variable is 1. In fact blocks is never 0. Therefore is this a feature or a bug that prevents 256 bytes being sent in block mode when it is a single complete 1 block of data ? If it is a bug then I suggest the sdio_io_rw_ext_helper() in sdio_io.c be able to select byte mode by setting blocks to 0 and then blocks can be set to 1 to select block mode for a single block. Have I missed something ? Technically, there is a bug in sdio_io_rw_ext_helper() in sdio_io.c 211 while (remainder > func->cur_blksize) { should be, = missing 211 while (remainder >= func->cur_blksize) { however the resulting call to mmc_io_rw_extended() is the same as blocks = 1 for both the "block mode" while loop (with the "fix") and the "byte mode" while loop (without the "fix"). The "byte mode" while loop has a hard coded value of 1 for the blocks parameter. So the bug is masked. As I said above, I think the "byte mode" should use a value of 0 for the blocks parameter. What do you think ? Regards, Dean. -- Dean Jenkins Embedded Software Engineer MontaVista Software (UK) Professional Services Division - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/