On Fri, Oct 02, 2020 at 01:51:58AM -0700, Dexuan Cui wrote: > pci_restore_msi_state() directly writes the MSI/MSI-X related registers > via MMIO. On a physical machine, this works perfectly; for a Linux VM > running on a hypervisor, which typically enables IOMMU interrupt remapping, > the hypervisor usually should trap and emulate the MMIO accesses in order > to re-create the necessary interrupt remapping table entries in the IOMMU, > otherwise the interrupts can not work in the VM after hibernation. > > Hyper-V is different from other hypervisors in that it does not trap and > emulate the MMIO accesses, and instead it uses a para-virtualized method, > which requires the VM to call hv_compose_msi_msg() to notify the hypervisor > of the info that would be passed to the hypervisor in the case of the > trap-and-emulate method. This is not an issue to a lot of PCI device > drivers, which destroy and re-create the interrupts across hibernation, so > hv_compose_msi_msg() is called automatically. However, some PCI device > drivers (e.g. the in-tree GPU driver nouveau and the out-of-tree Nvidia > proprietary GPU driver) do not destroy and re-create MSI/MSI-X interrupts > across hibernation, so hv_pci_resume() has to call hv_compose_msi_msg(), > otherwise the PCI device drivers can no longer receive interrupts after > the VM resumes from hibernation. > > Hyper-V is also different in that chip->irq_unmask() may fail in a > Linux VM running on Hyper-V (on a physical machine, chip->irq_unmask() > can not fail because unmasking an MSI/MSI-X register just means an MMIO > write): during hibernation, when a CPU is offlined, the kernel tries > to move the interrupt to the remaining CPUs that haven't been offlined > yet. In this case, hv_irq_unmask() -> hv_do_hypercall() always fails > because the vmbus channel has been closed: here the early "return" in > hv_irq_unmask() means the pci_msi_unmask_irq() is not called, i.e. the > desc->masked remains "true", so later after hibernation, the MSI interrupt > always remains masked, which is incorrect. Refer to cpu_disable_common() > -> fixup_irqs() -> irq_migrate_all_off_this_cpu() -> migrate_one_irq(): > > static bool migrate_one_irq(struct irq_desc *desc) > { > ... > if (maskchip && chip->irq_mask) > chip->irq_mask(d); > ... > err = irq_do_set_affinity(d, affinity, false); > ... > if (maskchip && chip->irq_unmask) > chip->irq_unmask(d); > > Fix the issue by calling pci_msi_unmask_irq() unconditionally in > hv_irq_unmask(). Also suppress the error message for hibernation because > the hypercall failure during hibernation does not matter (at this time > all the devices have been frozen). Note: the correct affinity info is > still updated into the irqdata data structure in migrate_one_irq() -> > irq_do_set_affinity() -> hv_set_affinity(), so later when the VM > resumes, hv_pci_restore_msi_state() is able to correctly restore > the interrupt with the correct affinity. > > Fixes: ac82fc832708 ("PCI: hv: Add hibernation support") > Reviewed-by: Jake Oshins <ja...@microsoft.com> > Signed-off-by: Dexuan Cui <de...@microsoft.com> > --- > > Changes in v2: > Fixed a typo in the comment in hv_irq_unmask. Thanks to Michael! > Added Jake's Reviewed-by. > > Changes in v3: > Improved the commit log. > Improved the comments. > Improved the change in hv_irq_unmask(): removed the early "return" > and call pci_msi_unmask_irq() unconditionally. > > drivers/pci/controller/pci-hyperv.c | 50 +++++++++++++++++++++++++++-- > 1 file changed, 47 insertions(+), 3 deletions(-)
Applied to pci/hv, thanks ! Lorenzo > diff --git a/drivers/pci/controller/pci-hyperv.c > b/drivers/pci/controller/pci-hyperv.c > index fc4c3a15e570..a9df492fbffa 100644 > --- a/drivers/pci/controller/pci-hyperv.c > +++ b/drivers/pci/controller/pci-hyperv.c > @@ -1276,11 +1276,25 @@ static void hv_irq_unmask(struct irq_data *data) > exit_unlock: > spin_unlock_irqrestore(&hbus->retarget_msi_interrupt_lock, flags); > > - if (res) { > + /* > + * During hibernation, when a CPU is offlined, the kernel tries > + * to move the interrupt to the remaining CPUs that haven't > + * been offlined yet. In this case, the below hv_do_hypercall() > + * always fails since the vmbus channel has been closed: > + * refer to cpu_disable_common() -> fixup_irqs() -> > + * irq_migrate_all_off_this_cpu() -> migrate_one_irq(). > + * > + * Suppress the error message for hibernation because the failure > + * during hibernation does not matter (at this time all the devices > + * have been frozen). Note: the correct affinity info is still updated > + * into the irqdata data structure in migrate_one_irq() -> > + * irq_do_set_affinity() -> hv_set_affinity(), so later when the VM > + * resumes, hv_pci_restore_msi_state() is able to correctly restore > + * the interrupt with the correct affinity. > + */ > + if (res && hbus->state != hv_pcibus_removing) > dev_err(&hbus->hdev->device, > "%s() failed: %#llx", __func__, res); > - return; > - } > > pci_msi_unmask_irq(data); > } > @@ -3372,6 +3386,34 @@ static int hv_pci_suspend(struct hv_device *hdev) > return 0; > } > > +static int hv_pci_restore_msi_msg(struct pci_dev *pdev, void *arg) > +{ > + struct msi_desc *entry; > + struct irq_data *irq_data; > + > + for_each_pci_msi_entry(entry, pdev) { > + irq_data = irq_get_irq_data(entry->irq); > + if (WARN_ON_ONCE(!irq_data)) > + return -EINVAL; > + > + hv_compose_msi_msg(irq_data, &entry->msg); > + } > + > + return 0; > +} > + > +/* > + * Upon resume, pci_restore_msi_state() -> ... -> __pci_write_msi_msg() > + * directly writes the MSI/MSI-X registers via MMIO, but since Hyper-V > + * doesn't trap and emulate the MMIO accesses, here hv_compose_msi_msg() > + * must be used to ask Hyper-V to re-create the IOMMU Interrupt Remapping > + * Table entries. > + */ > +static void hv_pci_restore_msi_state(struct hv_pcibus_device *hbus) > +{ > + pci_walk_bus(hbus->pci_bus, hv_pci_restore_msi_msg, NULL); > +} > + > static int hv_pci_resume(struct hv_device *hdev) > { > struct hv_pcibus_device *hbus = hv_get_drvdata(hdev); > @@ -3405,6 +3447,8 @@ static int hv_pci_resume(struct hv_device *hdev) > > prepopulate_bars(hbus); > > + hv_pci_restore_msi_state(hbus); > + > hbus->state = hv_pcibus_installed; > return 0; > out: > -- > 2.19.1 >