[PATCH 03/11] arm64: dts: qcom: pm8994: Add thermal-zones for temp alarm

[Konrad Dybcio]

This will shut down the platform in case the PMIC overheats.

Signed-off-by: Konrad Dybcio <konradyb...@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm8994.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi 
b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 7825208b0d8b..9ab5657f7d23 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -4,6 +4,30 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
+/ {
+       thermal-zones {
+               pm8994 {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&pm8994_temp>;
+
+                       trips {
+                               pm8994_alert0: pm8994-alert0 {
+                                       temperature = <95000>;
+                                       hysteresis = <2000>;
+                                       type = "passive";
+                               };
+                               pm8994_crit: pm8994-crit {
+                                       temperature = <125000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+       };
+};
+
 &spmi_bus {
 
        pmic@0 {
-- 
2.28.0