On Thu, Oct 01, 2020 at 11:50:35AM +0300, Alexandru Ardelean wrote: > This change converts the old binding for the AXI clkgen driver to a yaml > format. > > As maintainers, added: > - Lars-Peter Clausen <[email protected]> - as original author of driver & > binding
Do you have permission for relicensing? The default was GPL-2.0. > - Michael Hennerich <[email protected]> - as supporter of > Analog Devices drivers > > Signed-off-by: Alexandru Ardelean <[email protected]> > --- > .../bindings/clock/adi,axi-clkgen.yaml | 52 +++++++++++++++++++ > .../devicetree/bindings/clock/axi-clkgen.txt | 25 --------- > 2 files changed, 52 insertions(+), 25 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml > delete mode 100644 Documentation/devicetree/bindings/clock/axi-clkgen.txt > > diff --git a/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml > b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml > new file mode 100644 > index 000000000000..45497f370cb3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/adi,axi-clkgen.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Binding for Analog Devices AXI clkgen pcore clock generator > + > +maintainers: > + - Lars-Peter Clausen <[email protected]> > + - Michael Hennerich <[email protected]> > + > +description: | > + The axi_clkgen IP core is a software programmable clock generator, > + that can be synthesized on various FPGA platforms. > + > + Link: https://wiki.analog.com/resources/fpga/docs/axi_clkgen > + > +properties: > + compatible: > + enum: > + - adi,axi-clkgen-2.00.a > + > + clocks: > + description: > + Phandle and clock specifier for the parent clock(s). Drop, that's every 'clocks'. > This must either > + reference one clock if only the first clock input is connected or two > + if both clock inputs are connected. For the later case the clock > + connected to the first input must be specified first. That doesn't really say what the 2 clocks are. > + minItems: 1 > + maxItems: 2 > + > + '#clock-cells': > + const: 0 > + > + reg: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - clocks > + - '#clock-cells' additionalProperties: false > + > +examples: > + - | > + clock@ff000000 { clock-controller@... > + compatible = "adi,axi-clkgen-2.00.a"; > + #clock-cells = <0>; > + reg = <0xff000000 0x1000>; > + clocks = <&osc 1>; > + }; > diff --git a/Documentation/devicetree/bindings/clock/axi-clkgen.txt > b/Documentation/devicetree/bindings/clock/axi-clkgen.txt > deleted file mode 100644 > index aca94fe9416f..000000000000 > --- a/Documentation/devicetree/bindings/clock/axi-clkgen.txt > +++ /dev/null > @@ -1,25 +0,0 @@ > -Binding for the axi-clkgen clock generator > - > -This binding uses the common clock binding[1]. > - > -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt > - > -Required properties: > -- compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a". > -- #clock-cells : from common clock binding; Should always be set to 0. > -- reg : Address and length of the axi-clkgen register set. > -- clocks : Phandle and clock specifier for the parent clock(s). This must > - either reference one clock if only the first clock input is connected > or two > - if both clock inputs are connected. For the later case the clock > connected > - to the first input must be specified first. > - > -Optional properties: > -- clock-output-names : From common clock binding. > - > -Example: > - clock@ff000000 { > - compatible = "adi,axi-clkgen"; > - #clock-cells = <0>; > - reg = <0xff000000 0x1000>; > - clocks = <&osc 1>; > - }; > -- > 2.17.1 >
